Fuses and PLC Question

You can post your problem related to PLC Projects here. We will try our best to help you out.
Vernie
Posts:33
Joined:Mon Feb 20, 2017 9:19 am
Fuses and PLC Question

Post by Vernie » Wed Mar 08, 2017 7:10 am

Hello,

In my facility, I have three PLC input cards connected next to each other (SLC 500 1746-ia16) controlling several field devices. On each input (16 total) of the cards, I wired a 100ma fuse to protect the inputs from blowing. After several months of the cards working, numerous inputs on each card blew; however, their fuses did not blow. I examined the inputs on each card and saw that the resistor got blown. Could it be possible for it to be a voltage issue? Some of the field devices are powered by different 120v sources. Do you guys have any suggestions on what the problem is?

Regards,

Post Reply