Scada Problems analogue signal 4-20mA drive stroke Actuator motor of pump

You can post your problem related to PLC Projects here. We will try our best to help you out.
Vernie
Posts:33
Joined:Mon Feb 20, 2017 9:19 am
Scada Problems analogue signal 4-20mA drive stroke Actuator motor of pump

Post by Vernie » Wed Mar 08, 2017 7:15 am

Hi,

Need some advise as I am having a pump with automatic stroke control by analog 4-20ma

There is input signal and feedback to Scada.

What i experienced,issue.

There is unknown interference that drift the actuator forward and backward.

We measured the input signal using milliam multimeter in series. It is constant in input.

Another issue when the VFD motor off, the stroke signal is deifting by itself. Not sure if there is possible intereference or rootcause that can be narrow down in the case of troubleshooting analog signal.

Post Reply