gear design software

You can post your problem related to Mechanical Projects here. We will try our best to help you out.
Post Reply
Robert
Posts: 31
Joined: Sat Feb 18, 2017 7:21 am

gear design software

Post by Robert » Thu Mar 09, 2017 9:37 am

hello is there any software which will calculate how to manufacture gears ? with correction factor, pitch, centres etc

I have a gear train with 4 gears located. but 3 of the gears will hae different teeth counts and will be interchangeable.
i.e first gear = 17,18,19 teeth. 2nd gear 58t, 59t 60t.

each gear there needs to be interchangeable.

any help would be appreciated.

Post Reply