myRio Cannot setup WiFi

You can post your problem related to LabView Projects here. We will try our best to help you out.
Post Reply
Robinson
Posts:12
Joined:Fri Mar 03, 2017 11:06 am
myRio Cannot setup WiFi

Post by Robinson » Fri Mar 03, 2017 12:50 pm

I have a myRio which shows up on Max and has the software installed. I can even run programs on the FPGA and processors fine.

What I cannot appear to do is when connected by the USB cable, manage to use the web browser to get to the IP 172.11.11.2.

I have pinged that IP and it replies fine but when i put that in the web browser I get nothing. Says the URL could not be found.

I assume this is the say to setup the WIFI since it said so in the instructions. Also in Max I can see things under System Settings - shows IP 172.22.11.2 and 0.0.0.0 for Wireless, DNS Name etc but when I select Network settings it says no adapters found.

Junaid_Shahid
Posts:110
Joined:Tue Feb 14, 2017 9:00 am

Re: myRio Cannot setup WiFi

Post by Junaid_Shahid » Fri Mar 03, 2017 12:52 pm

Robinson wrote:
Fri Mar 03, 2017 12:50 pm
I have a myRio which shows up on Max and has the software installed. I can even run programs on the FPGA and processors fine.

What I cannot appear to do is when connected by the USB cable, manage to use the web browser to get to the IP 172.11.11.2.

I have pinged that IP and it replies fine but when i put that in the web browser I get nothing. Says the URL could not be found.

I assume this is the say to setup the WIFI since it said so in the instructions. Also in Max I can see things under System Settings - shows IP 172.22.11.2 and 0.0.0.0 for Wireless, DNS Name etc but when I select Network settings it says no adapters found.
When connected via USB the default IP address for myRIO is 172.22.11.2. When you said 172.11.11.2 in your post is that a typo or did you change the ip address of the myRIO?

Do you have the recommended software set installed on the myRIO (either through MAX or the Getting Started Wizard)? You'll need the NI Web-Based Configuration software installed on the myRIO in order to configure wifi through the web interface.

Let us know if that help or if you have follow up questions.
Recommend to read:
HOW TO CONFIGURE NI MYRIO ON WIFI

Post Reply