Xilinx Old school software "XACT" or "ViewLogic4"

You can post your problem related to FPGa Projects here. We will try our best to help you out.
Post Reply
Shelton
Posts: 18
Joined: Mon Feb 20, 2017 9:15 am

Xilinx Old school software "XACT" or "ViewLogic4"

Post by Shelton » Wed Mar 08, 2017 6:33 am

Hey Folks,

I've run into a snag here....
I dug out the old school Xilinx "Xact" software boxes from storage, and I even found the hardware Dongle which was what I was most concerned about finding in order to revive this old software that came out in the early 90's.
Just looking to mess around with the Vintage stuff for fun! Do a few of the old tutorials i have on file. :)

I then go to take out the XACT software Discs to set it all up... and I find a Windows Drivers Disc and a Printer driver disk in their place!!
NNNooooooooooo!!!

I guess whoever used it last here in my lab, didn't put the discs back and so I'm supper upset as I wanted to get this all setup and do a few Old school tutorials from back in the good old days of the Vintage Xilinx 2K devices.


I know this is probably a long shot......
but I'm wondering if there might be someone here that might still have a copy of this "XACT" or "Viewlogic" software lying around somewhere that I could get?


It seems we've lost all of our old School Xilinx stuff too.
A real bummer.


So if anyone can help......if you could send me a message.
That would be amazing!


Thanks folks,

blinky84
Posts: 1
Joined: Sat Mar 09, 2019 12:13 am

Re: Xilinx Old school software "XACT" or "ViewLogic4"

Post by blinky84 » Sat Mar 09, 2019 12:32 am

Sorry to bump such an old thread...but did anyone ever have a copy of ViewLogic4? I've been looking and looking. Thanks.

Post Reply