ATSAML11D14A EVSYS registers

The 154 registers of EVSYS (Event System Interface), from 0x42000000, with their reset value and every field. The ATSAML11D14A has 1227 registers in 46 peripherals, one page each.

EVSYS Event System Interface

CTRLAControl

Address
0x42000000
Reset
0x00
Access
write only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0SWRST
1 field
FieldBitsWhat it does
SWRST0Software Reset

SWEVTSoftware Event

Address
0x42000004
Reset
0x00000000
Access
write only
Size
32-bit
8 fields
FieldBitsWhat it does
CHANNEL77Channel 7 Software Selection
CHANNEL66Channel 6 Software Selection
CHANNEL55Channel 5 Software Selection
CHANNEL44Channel 4 Software Selection
CHANNEL33Channel 3 Software Selection
CHANNEL22Channel 2 Software Selection
CHANNEL11Channel 1 Software Selection
CHANNEL00Channel 0 Software Selection

PRICTRLPriority Control

Address
0x42000008
Reset
0x00
Access
read/write
  1. 7RREN
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1PRI1
  8. 0PRI0
2 fields
FieldBitsWhat it does
RREN7Round-Robin Scheduling Enable
PRI1:0Channel Priority Number

INTPENDChannel Pending Interrupt

Address
0x42000010
Reset
0x4000
Access
read/write
Size
16-bit
5 fields
FieldBitsWhat it does
BUSY15Busy
READY14Ready
EVD9Channel Event Detected
OVR8Channel Overrun
ID1:0Channel ID

INTSTATUSInterrupt Status

Address
0x42000014
Reset
0x00000000
Access
read only
Size
32-bit
4 fields
FieldBitsWhat it does
CHINT33Channel 3 Pending Interrupt
CHINT22Channel 2 Pending Interrupt
CHINT11Channel 1 Pending Interrupt
CHINT00Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address
0x42000018
Reset
0x00000000
Access
read only
Size
32-bit
4 fields
FieldBitsWhat it does
BUSYCH33Busy Channel 3
BUSYCH22Busy Channel 2
BUSYCH11Busy Channel 1
BUSYCH00Busy Channel 0

READYUSRReady Users

Address
0x4200001C
Reset
0xFFFFFFFF
Access
read only
Size
32-bit
4 fields
FieldBitsWhat it does
READYUSR33Ready User for Channel 3
READYUSR22Ready User for Channel 2
READYUSR11Ready User for Channel 1
READYUSR00Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address
0x42000020
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000024
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000025
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000026
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address
0x42000027
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL1.CHANNELChannel n Control

Address
0x42000028
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200002C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200002D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200002E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address
0x4200002F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL2.CHANNELChannel n Control

Address
0x42000030
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000034
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000035
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000036
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address
0x42000037
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL3.CHANNELChannel n Control

Address
0x42000038
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200003C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200003D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200003E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address
0x4200003F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL4.CHANNELChannel n Control

Address
0x42000040
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000044
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000045
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000046
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address
0x42000047
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL5.CHANNELChannel n Control

Address
0x42000048
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200004C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200004D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200004E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address
0x4200004F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL6.CHANNELChannel n Control

Address
0x42000050
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000054
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000055
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000056
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address
0x42000057
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL7.CHANNELChannel n Control

Address
0x42000058
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200005C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200005D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200005E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address
0x4200005F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

USER0User Multiplexer n

Address
0x42000120
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER1User Multiplexer n

Address
0x42000121
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER2User Multiplexer n

Address
0x42000122
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER3User Multiplexer n

Address
0x42000123
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER4User Multiplexer n

Address
0x42000124
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER5User Multiplexer n

Address
0x42000125
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER6User Multiplexer n

Address
0x42000126
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER7User Multiplexer n

Address
0x42000127
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER8User Multiplexer n

Address
0x42000128
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER9User Multiplexer n

Address
0x42000129
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER10User Multiplexer n

Address
0x4200012A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER11User Multiplexer n

Address
0x4200012B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER12User Multiplexer n

Address
0x4200012C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER13User Multiplexer n

Address
0x4200012D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER14User Multiplexer n

Address
0x4200012E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER15User Multiplexer n

Address
0x4200012F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER16User Multiplexer n

Address
0x42000130
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER17User Multiplexer n

Address
0x42000131
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER18User Multiplexer n

Address
0x42000132
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER19User Multiplexer n

Address
0x42000133
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER20User Multiplexer n

Address
0x42000134
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER21User Multiplexer n

Address
0x42000135
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER22User Multiplexer n

Address
0x42000136
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

INTENCLRInterrupt Enable Clear

Address
0x420001D4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0NSCHK
1 field
FieldBitsWhat it does
NSCHK0Non-Secure Check Interrupt Enable

INTENSETInterrupt Enable Set

Address
0x420001D5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0NSCHK
1 field
FieldBitsWhat it does
NSCHK0Non-Secure Check Interrupt Enable

INTFLAGInterrupt Flag Status and Clear

Address
0x420001D6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0NSCHK
1 field
FieldBitsWhat it does
NSCHK0Non-Secure Check

NONSECCHANChannels Security Attribution

Address
0x420001D8
Reset
0x00000000
Access
read/write
Size
32-bit
8 fields
FieldBitsWhat it does
CHANNEL77Non-Secure for Channel 7
CHANNEL66Non-Secure for Channel 6
CHANNEL55Non-Secure for Channel 5
CHANNEL44Non-Secure for Channel 4
CHANNEL33Non-Secure for Channel 3
CHANNEL22Non-Secure for Channel 2
CHANNEL11Non-Secure for Channel 1
CHANNEL00Non-Secure for Channel 0

NSCHKCHANNon-Secure Channels Check

Address
0x420001DC
Reset
0x00000000
Access
read/write
Size
32-bit
8 fields
FieldBitsWhat it does
CHANNEL77Channel 7 to be checked as non-secured
CHANNEL66Channel 6 to be checked as non-secured
CHANNEL55Channel 5 to be checked as non-secured
CHANNEL44Channel 4 to be checked as non-secured
CHANNEL33Channel 3 to be checked as non-secured
CHANNEL22Channel 2 to be checked as non-secured
CHANNEL11Channel 1 to be checked as non-secured
CHANNEL00Channel 0 to be checked as non-secured

NONSECUSERUsers Security Attribution

Address
0x420001E0
Reset
0x00000000
Access
read/write
Size
32-bit
23 fields
FieldBitsWhat it does
USER2222Non-Secure for User 22
USER2121Non-Secure for User 21
USER2020Non-Secure for User 20
USER1919Non-Secure for User 19
USER1818Non-Secure for User 18
USER1717Non-Secure for User 17
USER1616Non-Secure for User 16
USER1515Non-Secure for User 15
USER1414Non-Secure for User 14
USER1313Non-Secure for User 13
USER1212Non-Secure for User 12
USER1111Non-Secure for User 11
USER1010Non-Secure for User 10
USER99Non-Secure for User 9
USER88Non-Secure for User 8
USER77Non-Secure for User 7
USER66Non-Secure for User 6
USER55Non-Secure for User 5
USER44Non-Secure for User 4
USER33Non-Secure for User 3
USER22Non-Secure for User 2
USER11Non-Secure for User 1
USER00Non-Secure for User 0

NSCHKUSERNon-Secure Users Check

Address
0x420001F0
Reset
0x00000000
Access
read/write
Size
32-bit
23 fields
FieldBitsWhat it does
USER2222User 22 to be checked as non-secured
USER2121User 21 to be checked as non-secured
USER2020User 20 to be checked as non-secured
USER1919User 19 to be checked as non-secured
USER1818User 18 to be checked as non-secured
USER1717User 17 to be checked as non-secured
USER1616User 16 to be checked as non-secured
USER1515User 15 to be checked as non-secured
USER1414User 14 to be checked as non-secured
USER1313User 13 to be checked as non-secured
USER1212User 12 to be checked as non-secured
USER1111User 11 to be checked as non-secured
USER1010User 10 to be checked as non-secured
USER99User 9 to be checked as non-secured
USER88User 8 to be checked as non-secured
USER77User 7 to be checked as non-secured
USER66User 6 to be checked as non-secured
USER55User 5 to be checked as non-secured
USER44User 4 to be checked as non-secured
USER33User 3 to be checked as non-secured
USER22User 2 to be checked as non-secured
USER11User 1 to be checked as non-secured
USER00User 0 to be checked as non-secured

CTRLAControl

Address
0x42000200
Reset
0x00
Access
write only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0SWRST
1 field
FieldBitsWhat it does
SWRST0Software Reset

SWEVTSoftware Event

Address
0x42000204
Reset
0x00000000
Access
write only
Size
32-bit
8 fields
FieldBitsWhat it does
CHANNEL77Channel 7 Software Selection
CHANNEL66Channel 6 Software Selection
CHANNEL55Channel 5 Software Selection
CHANNEL44Channel 4 Software Selection
CHANNEL33Channel 3 Software Selection
CHANNEL22Channel 2 Software Selection
CHANNEL11Channel 1 Software Selection
CHANNEL00Channel 0 Software Selection

PRICTRLPriority Control

Address
0x42000208
Reset
0x00
Access
read/write
  1. 7RREN
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1PRI1
  8. 0PRI0
2 fields
FieldBitsWhat it does
RREN7Round-Robin Scheduling Enable
PRI1:0Channel Priority Number

INTPENDChannel Pending Interrupt

Address
0x42000210
Reset
0x4000
Access
read/write
Size
16-bit
5 fields
FieldBitsWhat it does
BUSY15Busy
READY14Ready
EVD9Channel Event Detected
OVR8Channel Overrun
ID1:0Channel ID

INTSTATUSInterrupt Status

Address
0x42000214
Reset
0x00000000
Access
read only
Size
32-bit
4 fields
FieldBitsWhat it does
CHINT33Channel 3 Pending Interrupt
CHINT22Channel 2 Pending Interrupt
CHINT11Channel 1 Pending Interrupt
CHINT00Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address
0x42000218
Reset
0x00000000
Access
read only
Size
32-bit
4 fields
FieldBitsWhat it does
BUSYCH33Busy Channel 3
BUSYCH22Busy Channel 2
BUSYCH11Busy Channel 1
BUSYCH00Busy Channel 0

READYUSRReady Users

Address
0x4200021C
Reset
0xFFFFFFFF
Access
read only
Size
32-bit
4 fields
FieldBitsWhat it does
READYUSR33Ready User for Channel 3
READYUSR22Ready User for Channel 2
READYUSR11Ready User for Channel 1
READYUSR00Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address
0x42000220
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000224
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000225
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000226
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address
0x42000227
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL1.CHANNELChannel n Control

Address
0x42000228
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200022C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200022D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200022E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address
0x4200022F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL2.CHANNELChannel n Control

Address
0x42000230
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000234
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000235
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000236
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address
0x42000237
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL3.CHANNELChannel n Control

Address
0x42000238
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200023C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200023D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200023E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address
0x4200023F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL4.CHANNELChannel n Control

Address
0x42000240
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000244
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000245
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000246
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address
0x42000247
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL5.CHANNELChannel n Control

Address
0x42000248
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200024C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200024D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200024E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address
0x4200024F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL6.CHANNELChannel n Control

Address
0x42000250
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000254
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000255
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000256
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address
0x42000257
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL7.CHANNELChannel n Control

Address
0x42000258
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN5:0Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200025C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200025D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200025E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address
0x4200025F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

USER0User Multiplexer n

Address
0x42000320
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER1User Multiplexer n

Address
0x42000321
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER2User Multiplexer n

Address
0x42000322
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER3User Multiplexer n

Address
0x42000323
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER4User Multiplexer n

Address
0x42000324
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER5User Multiplexer n

Address
0x42000325
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER6User Multiplexer n

Address
0x42000326
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER7User Multiplexer n

Address
0x42000327
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER8User Multiplexer n

Address
0x42000328
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER9User Multiplexer n

Address
0x42000329
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER10User Multiplexer n

Address
0x4200032A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER11User Multiplexer n

Address
0x4200032B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER12User Multiplexer n

Address
0x4200032C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER13User Multiplexer n

Address
0x4200032D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER14User Multiplexer n

Address
0x4200032E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER15User Multiplexer n

Address
0x4200032F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER16User Multiplexer n

Address
0x42000330
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER17User Multiplexer n

Address
0x42000331
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER18User Multiplexer n

Address
0x42000332
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER19User Multiplexer n

Address
0x42000333
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER20User Multiplexer n

Address
0x42000334
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER21User Multiplexer n

Address
0x42000335
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER22User Multiplexer n

Address
0x42000336
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

INTENCLRInterrupt Enable Clear

Address
0x420003D4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0NSCHK
1 field
FieldBitsWhat it does
NSCHK0Non-Secure Check Interrupt Enable

INTENSETInterrupt Enable Set

Address
0x420003D5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0NSCHK
1 field
FieldBitsWhat it does
NSCHK0Non-Secure Check Interrupt Enable

INTFLAGInterrupt Flag Status and Clear

Address
0x420003D6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0NSCHK
1 field
FieldBitsWhat it does
NSCHK0Non-Secure Check

NONSECCHANChannels Security Attribution

Address
0x420003D8
Reset
0x00000000
Access
read/write
Size
32-bit
8 fields
FieldBitsWhat it does
CHANNEL77Non-Secure for Channel 7
CHANNEL66Non-Secure for Channel 6
CHANNEL55Non-Secure for Channel 5
CHANNEL44Non-Secure for Channel 4
CHANNEL33Non-Secure for Channel 3
CHANNEL22Non-Secure for Channel 2
CHANNEL11Non-Secure for Channel 1
CHANNEL00Non-Secure for Channel 0

NSCHKCHANNon-Secure Channels Check

Address
0x420003DC
Reset
0x00000000
Access
read/write
Size
32-bit
8 fields
FieldBitsWhat it does
CHANNEL77Channel 7 to be checked as non-secured
CHANNEL66Channel 6 to be checked as non-secured
CHANNEL55Channel 5 to be checked as non-secured
CHANNEL44Channel 4 to be checked as non-secured
CHANNEL33Channel 3 to be checked as non-secured
CHANNEL22Channel 2 to be checked as non-secured
CHANNEL11Channel 1 to be checked as non-secured
CHANNEL00Channel 0 to be checked as non-secured

NONSECUSERUsers Security Attribution

Address
0x420003E0
Reset
0x00000000
Access
read/write
Size
32-bit
23 fields
FieldBitsWhat it does
USER2222Non-Secure for User 22
USER2121Non-Secure for User 21
USER2020Non-Secure for User 20
USER1919Non-Secure for User 19
USER1818Non-Secure for User 18
USER1717Non-Secure for User 17
USER1616Non-Secure for User 16
USER1515Non-Secure for User 15
USER1414Non-Secure for User 14
USER1313Non-Secure for User 13
USER1212Non-Secure for User 12
USER1111Non-Secure for User 11
USER1010Non-Secure for User 10
USER99Non-Secure for User 9
USER88Non-Secure for User 8
USER77Non-Secure for User 7
USER66Non-Secure for User 6
USER55Non-Secure for User 5
USER44Non-Secure for User 4
USER33Non-Secure for User 3
USER22Non-Secure for User 2
USER11Non-Secure for User 1
USER00Non-Secure for User 0

NSCHKUSERNon-Secure Users Check

Address
0x420003F0
Reset
0x00000000
Access
read/write
Size
32-bit
23 fields
FieldBitsWhat it does
USER2222User 22 to be checked as non-secured
USER2121User 21 to be checked as non-secured
USER2020User 20 to be checked as non-secured
USER1919User 19 to be checked as non-secured
USER1818User 18 to be checked as non-secured
USER1717User 17 to be checked as non-secured
USER1616User 16 to be checked as non-secured
USER1515User 15 to be checked as non-secured
USER1414User 14 to be checked as non-secured
USER1313User 13 to be checked as non-secured
USER1212User 12 to be checked as non-secured
USER1111User 11 to be checked as non-secured
USER1010User 10 to be checked as non-secured
USER99User 9 to be checked as non-secured
USER88User 8 to be checked as non-secured
USER77User 7 to be checked as non-secured
USER66User 6 to be checked as non-secured
USER55User 5 to be checked as non-secured
USER44User 4 to be checked as non-secured
USER33User 3 to be checked as non-secured
USER22User 2 to be checked as non-secured
USER11User 1 to be checked as non-secured
USER00User 0 to be checked as non-secured