PIC32CK1012GC01100 EVSYS registers

The 271 registers of EVSYS (Event System Interface), from 0x4480E000, with their reset value and every field. The PIC32CK1012GC01100 has 5256 registers in 62 peripherals, one page each.

EVSYS Event System Interface

CTRLAControl

Address
0x4480E000
Reset
0x00
Access
write only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0SWRST
1 field
FieldBitsWhat it does
SWRST0Software Reset

SWEVTSoftware Event

Address
0x4480E004
Reset
0x00000000
Access
write only
Size
32-bit
32 fields
FieldBitsWhat it does
CHANNEL3030Channel 30 Software Selection
CHANNEL2929Channel 29 Software Selection
CHANNEL2828Channel 28 Software Selection
CHANNEL2727Channel 27 Software Selection
CHANNEL2626Channel 26 Software Selection
CHANNEL2525Channel 25 Software Selection
CHANNEL2424Channel 24 Software Selection
CHANNEL2323Channel 23 Software Selection
CHANNEL2222Channel 22 Software Selection
CHANNEL2121Channel 21 Software Selection
CHANNEL2020Channel 20 Software Selection
CHANNEL1919Channel 19 Software Selection
CHANNEL1818Channel 18 Software Selection
CHANNEL1717Channel 17 Software Selection
CHANNEL1616Channel 16 Software Selection
CHANNEL1515Channel 15 Software Selection
CHANNEL1414Channel 14 Software Selection
CHANNEL1313Channel 13 Software Selection
CHANNEL1212Channel 12 Software Selection
CHANNEL1111Channel 11 Software Selection
CHANNEL1010Channel 10 Software Selection
CHANNEL99Channel 9 Software Selection
CHANNEL88Channel 8 Software Selection
CHANNEL77Channel 7 Software Selection
CHANNEL66Channel 6 Software Selection
CHANNEL55Channel 5 Software Selection
CHANNEL44Channel 4 Software Selection
CHANNEL33Channel 3 Software Selection
CHANNEL22Channel 2 Software Selection
CHANNEL11Channel 1 Software Selection
CHANNEL00Channel 0 Software Selection
CHANNEL3131Channel 31 Software Selection

PRICTRLPriority Control

Address
0x4480E008
Reset
0x00
Access
read/write
  1. 7RREN
  2. 6–
  3. 5–
  4. 4–
  5. 3PRI3
  6. 2PRI2
  7. 1PRI1
  8. 0PRI0
2 fields
FieldBitsWhat it does
RREN7Round-Robin Scheduling Enable
PRI3:0Channel Priority Number

INTPENDChannel Pending Interrupt

Address
0x4480E010
Reset
0x4000
Access
read/write
Size
16-bit
5 fields
FieldBitsWhat it does
BUSY15Busy
READY14Ready
EVD9Channel Event Detected
OVR8Channel Overrun
ID3:0Channel ID

INTSTATUSInterrupt Status

Address
0x4480E014
Reset
0x00000000
Access
read only
Size
32-bit
12 fields
FieldBitsWhat it does
CHINT1111Channel 11 Pending Interrupt
CHINT1010Channel 10 Pending Interrupt
CHINT99Channel 9 Pending Interrupt
CHINT88Channel 8 Pending Interrupt
CHINT77Channel 7 Pending Interrupt
CHINT66Channel 6 Pending Interrupt
CHINT55Channel 5 Pending Interrupt
CHINT44Channel 4 Pending Interrupt
CHINT33Channel 3 Pending Interrupt
CHINT22Channel 2 Pending Interrupt
CHINT11Channel 1 Pending Interrupt
CHINT00Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address
0x4480E018
Reset
0x00000000
Access
read only
Size
32-bit
12 fields
FieldBitsWhat it does
BUSYCH1111Busy Channel 11
BUSYCH1010Busy Channel 10
BUSYCH99Busy Channel 9
BUSYCH88Busy Channel 8
BUSYCH77Busy Channel 7
BUSYCH66Busy Channel 6
BUSYCH55Busy Channel 5
BUSYCH44Busy Channel 4
BUSYCH33Busy Channel 3
BUSYCH22Busy Channel 2
BUSYCH11Busy Channel 1
BUSYCH00Busy Channel 0

READYUSRReady Users

Address
0x4480E01C
Reset
0xFFFFFFFF
Access
read only
Size
32-bit
12 fields
FieldBitsWhat it does
READYUSR1111Ready User for Channel 11
READYUSR1010Ready User for Channel 10
READYUSR99Ready User for Channel 9
READYUSR88Ready User for Channel 8
READYUSR77Ready User for Channel 7
READYUSR66Ready User for Channel 6
READYUSR55Ready User for Channel 5
READYUSR44Ready User for Channel 4
READYUSR33Ready User for Channel 3
READYUSR22Ready User for Channel 2
READYUSR11Ready User for Channel 1
READYUSR00Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address
0x4480E020
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E024
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E025
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E026
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address
0x4480E027
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL1.CHANNELChannel n Control

Address
0x4480E028
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E02C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E02D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E02E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address
0x4480E02F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL2.CHANNELChannel n Control

Address
0x4480E030
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E034
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E035
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E036
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address
0x4480E037
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL3.CHANNELChannel n Control

Address
0x4480E038
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E03C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E03D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E03E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address
0x4480E03F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL4.CHANNELChannel n Control

Address
0x4480E040
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E044
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E045
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E046
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address
0x4480E047
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL5.CHANNELChannel n Control

Address
0x4480E048
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E04C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E04D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E04E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address
0x4480E04F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL6.CHANNELChannel n Control

Address
0x4480E050
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E054
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E055
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E056
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address
0x4480E057
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL7.CHANNELChannel n Control

Address
0x4480E058
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E05C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E05D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E05E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address
0x4480E05F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL8.CHANNELChannel n Control

Address
0x4480E060
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL8.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E064
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL8.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E065
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL8.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E066
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL8.CHSTATUSChannel n Status

Address
0x4480E067
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL9.CHANNELChannel n Control

Address
0x4480E068
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL9.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E06C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL9.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E06D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL9.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E06E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL9.CHSTATUSChannel n Status

Address
0x4480E06F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL10.CHANNELChannel n Control

Address
0x4480E070
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL10.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E074
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL10.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E075
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL10.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E076
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL10.CHSTATUSChannel n Status

Address
0x4480E077
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL11.CHANNELChannel n Control

Address
0x4480E078
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL11.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E07C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL11.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E07D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL11.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E07E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL11.CHSTATUSChannel n Status

Address
0x4480E07F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL12.CHANNELChannel n Control

Address
0x4480E080
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL12.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E084
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL12.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E085
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL12.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E086
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL12.CHSTATUSChannel n Status

Address
0x4480E087
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL13.CHANNELChannel n Control

Address
0x4480E088
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL13.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E08C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL13.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E08D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL13.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E08E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL13.CHSTATUSChannel n Status

Address
0x4480E08F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL14.CHANNELChannel n Control

Address
0x4480E090
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL14.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E094
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL14.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E095
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL14.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E096
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL14.CHSTATUSChannel n Status

Address
0x4480E097
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL15.CHANNELChannel n Control

Address
0x4480E098
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL15.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E09C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL15.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E09D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL15.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E09E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL15.CHSTATUSChannel n Status

Address
0x4480E09F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL16.CHANNELChannel n Control

Address
0x4480E0A0
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL16.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0A4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL16.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0A5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL16.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0A6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL16.CHSTATUSChannel n Status

Address
0x4480E0A7
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL17.CHANNELChannel n Control

Address
0x4480E0A8
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL17.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0AC
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL17.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0AD
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL17.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0AE
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL17.CHSTATUSChannel n Status

Address
0x4480E0AF
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL18.CHANNELChannel n Control

Address
0x4480E0B0
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL18.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0B4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL18.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0B5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL18.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0B6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL18.CHSTATUSChannel n Status

Address
0x4480E0B7
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL19.CHANNELChannel n Control

Address
0x4480E0B8
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL19.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0BC
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL19.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0BD
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL19.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0BE
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL19.CHSTATUSChannel n Status

Address
0x4480E0BF
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL20.CHANNELChannel n Control

Address
0x4480E0C0
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL20.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0C4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL20.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0C5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL20.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0C6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL20.CHSTATUSChannel n Status

Address
0x4480E0C7
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL21.CHANNELChannel n Control

Address
0x4480E0C8
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL21.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0CC
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL21.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0CD
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL21.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0CE
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL21.CHSTATUSChannel n Status

Address
0x4480E0CF
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL22.CHANNELChannel n Control

Address
0x4480E0D0
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL22.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0D4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL22.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0D5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL22.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0D6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL22.CHSTATUSChannel n Status

Address
0x4480E0D7
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL23.CHANNELChannel n Control

Address
0x4480E0D8
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL23.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0DC
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL23.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0DD
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL23.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0DE
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL23.CHSTATUSChannel n Status

Address
0x4480E0DF
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL24.CHANNELChannel n Control

Address
0x4480E0E0
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL24.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0E4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL24.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0E5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL24.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0E6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL24.CHSTATUSChannel n Status

Address
0x4480E0E7
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL25.CHANNELChannel n Control

Address
0x4480E0E8
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL25.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0EC
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL25.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0ED
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL25.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0EE
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL25.CHSTATUSChannel n Status

Address
0x4480E0EF
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL26.CHANNELChannel n Control

Address
0x4480E0F0
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL26.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0F4
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL26.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0F5
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL26.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0F6
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL26.CHSTATUSChannel n Status

Address
0x4480E0F7
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL27.CHANNELChannel n Control

Address
0x4480E0F8
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL27.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E0FC
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL27.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E0FD
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL27.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E0FE
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL27.CHSTATUSChannel n Status

Address
0x4480E0FF
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL28.CHANNELChannel n Control

Address
0x4480E100
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL28.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E104
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL28.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E105
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL28.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E106
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL28.CHSTATUSChannel n Status

Address
0x4480E107
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL29.CHANNELChannel n Control

Address
0x4480E108
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL29.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E10C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL29.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E10D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL29.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E10E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL29.CHSTATUSChannel n Status

Address
0x4480E10F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL30.CHANNELChannel n Control

Address
0x4480E110
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL30.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E114
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL30.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E115
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL30.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E116
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL30.CHSTATUSChannel n Status

Address
0x4480E117
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL31.CHANNELChannel n Control

Address
0x4480E118
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL31.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480E11C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL31.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480E11D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL31.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480E11E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL31.CHSTATUSChannel n Status

Address
0x4480E11F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

USER0User Multiplexer n

Address
0x4480E120
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER1User Multiplexer n

Address
0x4480E121
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER2User Multiplexer n

Address
0x4480E122
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER3User Multiplexer n

Address
0x4480E123
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER4User Multiplexer n

Address
0x4480E124
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER5User Multiplexer n

Address
0x4480E125
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER6User Multiplexer n

Address
0x4480E126
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER7User Multiplexer n

Address
0x4480E127
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER8User Multiplexer n

Address
0x4480E128
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER9User Multiplexer n

Address
0x4480E129
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER10User Multiplexer n

Address
0x4480E12A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER11User Multiplexer n

Address
0x4480E12B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER12User Multiplexer n

Address
0x4480E12C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER13User Multiplexer n

Address
0x4480E12D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER14User Multiplexer n

Address
0x4480E12E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER15User Multiplexer n

Address
0x4480E12F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER16User Multiplexer n

Address
0x4480E130
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER17User Multiplexer n

Address
0x4480E131
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER18User Multiplexer n

Address
0x4480E132
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER19User Multiplexer n

Address
0x4480E133
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER20User Multiplexer n

Address
0x4480E134
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER21User Multiplexer n

Address
0x4480E135
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER22User Multiplexer n

Address
0x4480E136
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER23User Multiplexer n

Address
0x4480E137
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER24User Multiplexer n

Address
0x4480E138
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER25User Multiplexer n

Address
0x4480E139
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER26User Multiplexer n

Address
0x4480E13A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER27User Multiplexer n

Address
0x4480E13B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER28User Multiplexer n

Address
0x4480E13C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER29User Multiplexer n

Address
0x4480E13D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER30User Multiplexer n

Address
0x4480E13E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER31User Multiplexer n

Address
0x4480E13F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER32User Multiplexer n

Address
0x4480E140
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER33User Multiplexer n

Address
0x4480E141
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER34User Multiplexer n

Address
0x4480E142
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER35User Multiplexer n

Address
0x4480E143
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER36User Multiplexer n

Address
0x4480E144
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER37User Multiplexer n

Address
0x4480E145
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER38User Multiplexer n

Address
0x4480E146
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER39User Multiplexer n

Address
0x4480E147
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER40User Multiplexer n

Address
0x4480E148
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER41User Multiplexer n

Address
0x4480E149
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER42User Multiplexer n

Address
0x4480E14A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER43User Multiplexer n

Address
0x4480E14B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER44User Multiplexer n

Address
0x4480E14C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER45User Multiplexer n

Address
0x4480E14D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER46User Multiplexer n

Address
0x4480E14E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER47User Multiplexer n

Address
0x4480E14F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER48User Multiplexer n

Address
0x4480E150
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER49User Multiplexer n

Address
0x4480E151
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER50User Multiplexer n

Address
0x4480E152
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER51User Multiplexer n

Address
0x4480E153
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER52User Multiplexer n

Address
0x4480E154
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER53User Multiplexer n

Address
0x4480E155
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER54User Multiplexer n

Address
0x4480E156
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER55User Multiplexer n

Address
0x4480E157
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER56User Multiplexer n

Address
0x4480E158
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER57User Multiplexer n

Address
0x4480E159
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER58User Multiplexer n

Address
0x4480E15A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER59User Multiplexer n

Address
0x4480E15B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER60User Multiplexer n

Address
0x4480E15C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER61User Multiplexer n

Address
0x4480E15D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER62User Multiplexer n

Address
0x4480E15E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER63User Multiplexer n

Address
0x4480E15F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER64User Multiplexer n

Address
0x4480E160
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER65User Multiplexer n

Address
0x4480E161
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER66User Multiplexer n

Address
0x4480E162
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER67User Multiplexer n

Address
0x4480E163
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER68User Multiplexer n

Address
0x4480E164
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER69User Multiplexer n

Address
0x4480E165
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER70User Multiplexer n

Address
0x4480E166
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER71User Multiplexer n

Address
0x4480E167
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER72User Multiplexer n

Address
0x4480E168
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER73User Multiplexer n

Address
0x4480E169
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER74User Multiplexer n

Address
0x4480E16A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER75User Multiplexer n

Address
0x4480E16B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER76User Multiplexer n

Address
0x4480E16C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER77User Multiplexer n

Address
0x4480E16D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER78User Multiplexer n

Address
0x4480E16E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER79User Multiplexer n

Address
0x4480E16F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER80User Multiplexer n

Address
0x4480E170
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER81User Multiplexer n

Address
0x4480E171
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER82User Multiplexer n

Address
0x4480E172
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER83User Multiplexer n

Address
0x4480E173
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER84User Multiplexer n

Address
0x4480E174
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER85User Multiplexer n

Address
0x4480E175
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER86User Multiplexer n

Address
0x4480E176
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER87User Multiplexer n

Address
0x4480E177
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER88User Multiplexer n

Address
0x4480E178
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER89User Multiplexer n

Address
0x4480E179
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER90User Multiplexer n

Address
0x4480E17A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER91User Multiplexer n

Address
0x4480E17B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER92User Multiplexer n

Address
0x4480E17C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER93User Multiplexer n

Address
0x4480E17D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER94User Multiplexer n

Address
0x4480E17E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER95User Multiplexer n

Address
0x4480E17F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER96User Multiplexer n

Address
0x4480E180
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER97User Multiplexer n

Address
0x4480E181
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER98User Multiplexer n

Address
0x4480E182
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER99User Multiplexer n

Address
0x4480E183
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER100User Multiplexer n

Address
0x4480E184
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER101User Multiplexer n

Address
0x4480E185
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER102User Multiplexer n

Address
0x4480E186
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection

USER103User Multiplexer n

Address
0x4480E187
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5CHANNEL5
  4. 4CHANNEL4
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL5:0Channel Event Selection