PIC32CM2532LE00048 EVSYS registers

The 119 registers of EVSYS (Event System Interface), from 0x42000000, with their reset value and every field. The PIC32CM2532LE00048 has 1757 registers in 48 peripherals, one page each.

EVSYS Event System Interface

CTRLAControl

Address
0x42000000
Reset
0x00
Access
write only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0SWRST
1 field
FieldBitsWhat it does
SWRST0Software Reset

SWEVTSoftware Event

Address
0x42000004
Reset
0x00000000
Access
write only
Size
32-bit
12 fields
FieldBitsWhat it does
CHANNEL1111Channel 11 Software Selection
CHANNEL1010Channel 10 Software Selection
CHANNEL99Channel 9 Software Selection
CHANNEL88Channel 8 Software Selection
CHANNEL77Channel 7 Software Selection
CHANNEL66Channel 6 Software Selection
CHANNEL55Channel 5 Software Selection
CHANNEL44Channel 4 Software Selection
CHANNEL33Channel 3 Software Selection
CHANNEL22Channel 2 Software Selection
CHANNEL11Channel 1 Software Selection
CHANNEL00Channel 0 Software Selection

PRICTRLPriority Control

Address
0x42000008
Reset
0x00
Access
read/write
  1. 7RREN
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2PRI2
  7. 1PRI1
  8. 0PRI0
2 fields
FieldBitsWhat it does
RREN7Round-Robin Scheduling Enable
PRI2:0Channel Priority Number

INTPENDChannel Pending Interrupt

Address
0x42000010
Reset
0x4000
Access
read/write
Size
16-bit
5 fields
FieldBitsWhat it does
BUSY15Busy
READY14Ready
EVD9Channel Event Detected
OVR8Channel Overrun
ID2:0Channel ID

INTSTATUSInterrupt Status

Address
0x42000014
Reset
0x00000000
Access
read only
Size
32-bit
8 fields
FieldBitsWhat it does
CHINT77Channel 7 Pending Interrupt
CHINT66Channel 6 Pending Interrupt
CHINT55Channel 5 Pending Interrupt
CHINT44Channel 4 Pending Interrupt
CHINT33Channel 3 Pending Interrupt
CHINT22Channel 2 Pending Interrupt
CHINT11Channel 1 Pending Interrupt
CHINT00Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address
0x42000018
Reset
0x00000000
Access
read only
Size
32-bit
8 fields
FieldBitsWhat it does
BUSYCH77Busy Channel 7
BUSYCH66Busy Channel 6
BUSYCH55Busy Channel 5
BUSYCH44Busy Channel 4
BUSYCH33Busy Channel 3
BUSYCH22Busy Channel 2
BUSYCH11Busy Channel 1
BUSYCH00Busy Channel 0

READYUSRReady Users

Address
0x4200001C
Reset
0xFFFFFFFF
Access
read only
Size
32-bit
8 fields
FieldBitsWhat it does
READYUSR77Ready User for Channel 7
READYUSR66Ready User for Channel 6
READYUSR55Ready User for Channel 5
READYUSR44Ready User for Channel 4
READYUSR33Ready User for Channel 3
READYUSR22Ready User for Channel 2
READYUSR11Ready User for Channel 1
READYUSR00Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address
0x42000020
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000024
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000025
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000026
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address
0x42000027
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL1.CHANNELChannel n Control

Address
0x42000028
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200002C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200002D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200002E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address
0x4200002F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL2.CHANNELChannel n Control

Address
0x42000030
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000034
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000035
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000036
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address
0x42000037
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL3.CHANNELChannel n Control

Address
0x42000038
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200003C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200003D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200003E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address
0x4200003F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL4.CHANNELChannel n Control

Address
0x42000040
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000044
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000045
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000046
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address
0x42000047
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL5.CHANNELChannel n Control

Address
0x42000048
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200004C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200004D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200004E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address
0x4200004F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL6.CHANNELChannel n Control

Address
0x42000050
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000054
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000055
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000056
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address
0x42000057
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL7.CHANNELChannel n Control

Address
0x42000058
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200005C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200005D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200005E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address
0x4200005F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL8.CHANNELChannel n Control

Address
0x42000060
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL8.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000064
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL8.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000065
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL8.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000066
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL8.CHSTATUSChannel n Status

Address
0x42000067
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL9.CHANNELChannel n Control

Address
0x42000068
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL9.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200006C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL9.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200006D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL9.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200006E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL9.CHSTATUSChannel n Status

Address
0x4200006F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL10.CHANNELChannel n Control

Address
0x42000070
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL10.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x42000074
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL10.CHINTENSETChannel n Interrupt Enable Set

Address
0x42000075
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL10.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x42000076
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL10.CHSTATUSChannel n Status

Address
0x42000077
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL11.CHANNELChannel n Control

Address
0x42000078
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Synchronous path
  • 1 Resynchronized path
  • 2 Asynchronous path
EVGEN6:0Event Generator Selection

CHANNEL11.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4200007C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL11.CHINTENSETChannel n Interrupt Enable Set

Address
0x4200007D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL11.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4200007E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL11.CHSTATUSChannel n Status

Address
0x4200007F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

USER0User Multiplexer n

Address
0x42000120
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER1User Multiplexer n

Address
0x42000121
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER2User Multiplexer n

Address
0x42000122
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER3User Multiplexer n

Address
0x42000123
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER4User Multiplexer n

Address
0x42000124
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER5User Multiplexer n

Address
0x42000125
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER6User Multiplexer n

Address
0x42000126
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER7User Multiplexer n

Address
0x42000127
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER8User Multiplexer n

Address
0x42000128
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER9User Multiplexer n

Address
0x42000129
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER10User Multiplexer n

Address
0x4200012A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER11User Multiplexer n

Address
0x4200012B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER12User Multiplexer n

Address
0x4200012C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER13User Multiplexer n

Address
0x4200012D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER14User Multiplexer n

Address
0x4200012E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER15User Multiplexer n

Address
0x4200012F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER16User Multiplexer n

Address
0x42000130
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER17User Multiplexer n

Address
0x42000131
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER18User Multiplexer n

Address
0x42000132
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER19User Multiplexer n

Address
0x42000133
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER20User Multiplexer n

Address
0x42000134
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER21User Multiplexer n

Address
0x42000135
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER22User Multiplexer n

Address
0x42000136
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER23User Multiplexer n

Address
0x42000137
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER24User Multiplexer n

Address
0x42000138
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER25User Multiplexer n

Address
0x42000139
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER26User Multiplexer n

Address
0x4200013A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER27User Multiplexer n

Address
0x4200013B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER28User Multiplexer n

Address
0x4200013C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER29User Multiplexer n

Address
0x4200013D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER30User Multiplexer n

Address
0x4200013E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER31User Multiplexer n

Address
0x4200013F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER32User Multiplexer n

Address
0x42000140
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER33User Multiplexer n

Address
0x42000141
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER34User Multiplexer n

Address
0x42000142
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER35User Multiplexer n

Address
0x42000143
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER36User Multiplexer n

Address
0x42000144
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER37User Multiplexer n

Address
0x42000145
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER38User Multiplexer n

Address
0x42000146
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER39User Multiplexer n

Address
0x42000147
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER40User Multiplexer n

Address
0x42000148
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER41User Multiplexer n

Address
0x42000149
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER42User Multiplexer n

Address
0x4200014A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER43User Multiplexer n

Address
0x4200014B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER44User Multiplexer n

Address
0x4200014C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER45User Multiplexer n

Address
0x4200014D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER46User Multiplexer n

Address
0x4200014E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER47User Multiplexer n

Address
0x4200014F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER48User Multiplexer n

Address
0x42000150
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER49User Multiplexer n

Address
0x42000151
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER50User Multiplexer n

Address
0x42000152
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER51User Multiplexer n

Address
0x42000153
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection