PIC32CM5112SG00064 EVSYS registers

The 129 registers of EVSYS (Event System Interface), from 0x44806000, with their reset value and every field. The PIC32CM5112SG00064 has 3618 registers in 68 peripherals, one page each.

EVSYS Event System Interface

CTRLAControl

Address
0x44806000
Reset
0x00
Access
write only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1–
  8. 0SWRST
1 field
FieldBitsWhat it does
SWRST0Software Reset

SWEVTSoftware Event

Address
0x44806004
Reset
0x00000000
Access
write only
Size
32-bit
12 fields
FieldBitsWhat it does
CHANNEL1111Channel 11 Software Selection
CHANNEL1010Channel 10 Software Selection
CHANNEL99Channel 9 Software Selection
CHANNEL88Channel 8 Software Selection
CHANNEL77Channel 7 Software Selection
CHANNEL66Channel 6 Software Selection
CHANNEL55Channel 5 Software Selection
CHANNEL44Channel 4 Software Selection
CHANNEL33Channel 3 Software Selection
CHANNEL22Channel 2 Software Selection
CHANNEL11Channel 1 Software Selection
CHANNEL00Channel 0 Software Selection

PRICTRLPriority Control

Address
0x44806008
Reset
0x00
Access
read/write
  1. 7RREN
  2. 6–
  3. 5–
  4. 4–
  5. 3PRI3
  6. 2PRI2
  7. 1PRI1
  8. 0PRI0
2 fields
FieldBitsWhat it does
RREN7Round-Robin Scheduling Enable
PRI3:0Channel Priority Number

INTPENDChannel Pending Interrupt

Address
0x44806010
Reset
0x4000
Access
read/write
Size
16-bit
5 fields
FieldBitsWhat it does
BUSY15Busy
READY14Ready
EVD9Channel Event Detected
OVR8Channel Overrun
ID3:0Channel ID

INTSTATUSInterrupt Status

Address
0x44806014
Reset
0x00000000
Access
read only
Size
32-bit
12 fields
FieldBitsWhat it does
CHINT1111Channel 11 Pending Interrupt
CHINT1010Channel 10 Pending Interrupt
CHINT99Channel 9 Pending Interrupt
CHINT88Channel 8 Pending Interrupt
CHINT77Channel 7 Pending Interrupt
CHINT66Channel 6 Pending Interrupt
CHINT55Channel 5 Pending Interrupt
CHINT44Channel 4 Pending Interrupt
CHINT33Channel 3 Pending Interrupt
CHINT22Channel 2 Pending Interrupt
CHINT11Channel 1 Pending Interrupt
CHINT00Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address
0x44806018
Reset
0x00000000
Access
read only
Size
32-bit
12 fields
FieldBitsWhat it does
BUSYCH1111Busy Channel 11
BUSYCH1010Busy Channel 10
BUSYCH99Busy Channel 9
BUSYCH88Busy Channel 8
BUSYCH77Busy Channel 7
BUSYCH66Busy Channel 6
BUSYCH55Busy Channel 5
BUSYCH44Busy Channel 4
BUSYCH33Busy Channel 3
BUSYCH22Busy Channel 2
BUSYCH11Busy Channel 1
BUSYCH00Busy Channel 0

READYUSRReady Users

Address
0x4480601C
Reset
0x00000FFF
Access
read only
Size
32-bit
12 fields
FieldBitsWhat it does
READYUSR1111Ready User for Channel 11
READYUSR1010Ready User for Channel 10
READYUSR99Ready User for Channel 9
READYUSR88Ready User for Channel 8
READYUSR77Ready User for Channel 7
READYUSR66Ready User for Channel 6
READYUSR55Ready User for Channel 5
READYUSR44Ready User for Channel 4
READYUSR33Ready User for Channel 3
READYUSR22Ready User for Channel 2
READYUSR11Ready User for Channel 1
READYUSR00Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address
0x44806020
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x44806024
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address
0x44806025
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x44806026
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address
0x44806027
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL1.CHANNELChannel n Control

Address
0x44806028
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480602C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480602D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480602E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address
0x4480602F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL2.CHANNELChannel n Control

Address
0x44806030
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x44806034
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address
0x44806035
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x44806036
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address
0x44806037
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL3.CHANNELChannel n Control

Address
0x44806038
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480603C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480603D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480603E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address
0x4480603F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL4.CHANNELChannel n Control

Address
0x44806040
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x44806044
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address
0x44806045
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x44806046
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address
0x44806047
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL5.CHANNELChannel n Control

Address
0x44806048
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480604C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480604D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480604E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address
0x4480604F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL6.CHANNELChannel n Control

Address
0x44806050
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x44806054
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address
0x44806055
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x44806056
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address
0x44806057
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL7.CHANNELChannel n Control

Address
0x44806058
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480605C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480605D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480605E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address
0x4480605F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL8.CHANNELChannel n Control

Address
0x44806060
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL8.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x44806064
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL8.CHINTENSETChannel n Interrupt Enable Set

Address
0x44806065
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL8.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x44806066
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL8.CHSTATUSChannel n Status

Address
0x44806067
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL9.CHANNELChannel n Control

Address
0x44806068
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL9.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480606C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL9.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480606D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL9.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480606E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL9.CHSTATUSChannel n Status

Address
0x4480606F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL10.CHANNELChannel n Control

Address
0x44806070
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL10.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x44806074
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL10.CHINTENSETChannel n Interrupt Enable Set

Address
0x44806075
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL10.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x44806076
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL10.CHSTATUSChannel n Status

Address
0x44806077
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

CHANNEL11.CHANNELChannel n Control

Address
0x44806078
Reset
0x00008000
Access
read/write
Size
32-bit
5 fields
FieldBitsWhat it does
ONDEMAND15Generic Clock On Demand
RUNSTDBY14Run in standby
EDGSEL11:10Edge Detection Selection
  • 0 No event output when using the resynchronized or synchronous path
  • 1 Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path
  • 2 Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path
  • 3 Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH9:8Path Selection
  • 0 Asynchronous path
  • 1 Resynchronized path
EVGEN6:0Event Generator Selection

CHANNEL11.CHINTENCLRChannel n Interrupt Enable Clear

Address
0x4480607C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Disable
OVR0Channel Overrun Interrupt Disable

CHANNEL11.CHINTENSETChannel n Interrupt Enable Set

Address
0x4480607D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected Interrupt Enable
OVR0Channel Overrun Interrupt Enable

CHANNEL11.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address
0x4480607E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1EVD
  8. 0OVR
2 fields
FieldBitsWhat it does
EVD1Channel Event Detected
OVR0Channel Overrun

CHANNEL11.CHSTATUSChannel n Status

Address
0x4480607F
Reset
0x01
Access
read only
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1BUSYCH
  8. 0RDYUSR
2 fields
FieldBitsWhat it does
BUSYCH1Busy Channel
RDYUSR0Ready User

USER0User Multiplexer n

Address
0x44806120
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER1User Multiplexer n

Address
0x44806121
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER2User Multiplexer n

Address
0x44806122
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER3User Multiplexer n

Address
0x44806123
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER4User Multiplexer n

Address
0x44806124
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER5User Multiplexer n

Address
0x44806125
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER6User Multiplexer n

Address
0x44806126
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER7User Multiplexer n

Address
0x44806127
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER8User Multiplexer n

Address
0x44806128
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER9User Multiplexer n

Address
0x44806129
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER10User Multiplexer n

Address
0x4480612A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER11User Multiplexer n

Address
0x4480612B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER12User Multiplexer n

Address
0x4480612C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER13User Multiplexer n

Address
0x4480612D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER14User Multiplexer n

Address
0x4480612E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER15User Multiplexer n

Address
0x4480612F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER16User Multiplexer n

Address
0x44806130
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER17User Multiplexer n

Address
0x44806131
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER18User Multiplexer n

Address
0x44806132
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER19User Multiplexer n

Address
0x44806133
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER20User Multiplexer n

Address
0x44806134
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER21User Multiplexer n

Address
0x44806135
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER22User Multiplexer n

Address
0x44806136
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER23User Multiplexer n

Address
0x44806137
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER24User Multiplexer n

Address
0x44806138
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER25User Multiplexer n

Address
0x44806139
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER26User Multiplexer n

Address
0x4480613A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER27User Multiplexer n

Address
0x4480613B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER28User Multiplexer n

Address
0x4480613C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER29User Multiplexer n

Address
0x4480613D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER30User Multiplexer n

Address
0x4480613E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER31User Multiplexer n

Address
0x4480613F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER32User Multiplexer n

Address
0x44806140
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER33User Multiplexer n

Address
0x44806141
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER34User Multiplexer n

Address
0x44806142
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER35User Multiplexer n

Address
0x44806143
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER36User Multiplexer n

Address
0x44806144
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER37User Multiplexer n

Address
0x44806145
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER38User Multiplexer n

Address
0x44806146
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER39User Multiplexer n

Address
0x44806147
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER40User Multiplexer n

Address
0x44806148
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER41User Multiplexer n

Address
0x44806149
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER42User Multiplexer n

Address
0x4480614A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER43User Multiplexer n

Address
0x4480614B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER44User Multiplexer n

Address
0x4480614C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER45User Multiplexer n

Address
0x4480614D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER46User Multiplexer n

Address
0x4480614E
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER47User Multiplexer n

Address
0x4480614F
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER48User Multiplexer n

Address
0x44806150
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER49User Multiplexer n

Address
0x44806151
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER50User Multiplexer n

Address
0x44806152
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER51User Multiplexer n

Address
0x44806153
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER52User Multiplexer n

Address
0x44806154
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER53User Multiplexer n

Address
0x44806155
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER54User Multiplexer n

Address
0x44806156
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER55User Multiplexer n

Address
0x44806157
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER56User Multiplexer n

Address
0x44806158
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER57User Multiplexer n

Address
0x44806159
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER58User Multiplexer n

Address
0x4480615A
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER59User Multiplexer n

Address
0x4480615B
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER60User Multiplexer n

Address
0x4480615C
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection

USER61User Multiplexer n

Address
0x4480615D
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3CHANNEL3
  6. 2CHANNEL2
  7. 1CHANNEL1
  8. 0CHANNEL0
1 field
FieldBitsWhat it does
CHANNEL3:0Channel Event Selection