BETAGROUP0.DIRData Direction
- Address
0x40003000- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIR | 31:0 | Port Data Direction |
PIC32CM5164LS00048 PORT registers
The 390 registers of PORT (Port Module), from 0x40003000, with their reset value and every field. The PIC32CM5164LS00048 has 2318 registers in 56 peripherals, one page each.
PORT Port Module
GROUP0.DIRCLRData Direction Clear
- Address
0x40003004- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRCLR | 31:0 | Port Data Direction Clear |
GROUP0.DIRSETData Direction Set
- Address
0x40003008- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRSET | 31:0 | Port Data Direction Set |
GROUP0.DIRTGLData Direction Toggle
- Address
0x4000300C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRTGL | 31:0 | Port Data Direction Toggle |
GROUP0.OUTData Output Value
- Address
0x40003010- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUT | 31:0 | PORT Data Output Value |
GROUP0.OUTCLRData Output Value Clear
- Address
0x40003014- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTCLR | 31:0 | PORT Data Output Value Clear |
GROUP0.OUTSETData Output Value Set
- Address
0x40003018- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTSET | 31:0 | PORT Data Output Value Set |
GROUP0.OUTTGLData Output Value Toggle
- Address
0x4000301C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTTGL | 31:0 | PORT Data Output Value Toggle |
GROUP0.INData Input Value
- Address
0x40003020- Reset
0x00000000- Access
- read only
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| IN | 31:0 | PORT Data Input Value |
GROUP0.CTRLControl
- Address
0x40003024- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| SAMPLING | 31:0 | Input Sampling Mode |
GROUP0.WRCONFIGWrite Configuration
- Address
0x40003028- Reset
0x00000000- Access
- write only
- Size
- 32-bit
9 fields
| Field | Bits | What it does |
|---|---|---|
| WRPINCFG | 30 | Write PINCFG |
| WRPMUX | 28 | Write PMUX |
| PMUX | 27:24 | Peripheral Multiplexing |
| DRVSTR | 22 | Output Driver Strength Selection |
| PULLEN | 18 | Pull Enable |
| INEN | 17 | Input Enable |
| PMUXEN | 16 | Peripheral Multiplexer Enable |
| PINMASK | 15:0 | Pin Mask for Multiple Pin Configuration |
| HWSEL | 31 | Half-Word Select |
GROUP0.EVCTRLEvent Input Control
- Address
0x4000302C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
12 fields
| Field | Bits | What it does |
|---|---|---|
| EVACT3 | 30:29 | PORT Event Action 3 |
| PID3 | 28:24 | PORT Event Pin Identifier 3 |
| PORTEI2 | 23 | PORT Event Input Enable 2 |
| EVACT2 | 22:21 | PORT Event Action 2 |
| PID2 | 20:16 | PORT Event Pin Identifier 2 |
| PORTEI1 | 15 | PORT Event Input Enable 1 |
| EVACT1 | 14:13 | PORT Event Action 1 |
| PID1 | 12:8 | PORT Event Pin Identifier 1 |
| PORTEI0 | 7 | PORT Event Input Enable 0 |
| EVACT0 | 6:5 | PORT Event Action 0
|
| PID0 | 4:0 | PORT Event Pin Identifier 0 |
| PORTEI3 | 31 | PORT Event Input Enable 3 |
GROUP0.PMUX0Peripheral Multiplexing
- Address
0x40003030- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX1Peripheral Multiplexing
- Address
0x40003031- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX2Peripheral Multiplexing
- Address
0x40003032- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX3Peripheral Multiplexing
- Address
0x40003033- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX4Peripheral Multiplexing
- Address
0x40003034- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX5Peripheral Multiplexing
- Address
0x40003035- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX6Peripheral Multiplexing
- Address
0x40003036- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX7Peripheral Multiplexing
- Address
0x40003037- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX8Peripheral Multiplexing
- Address
0x40003038- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX9Peripheral Multiplexing
- Address
0x40003039- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX10Peripheral Multiplexing
- Address
0x4000303A- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX11Peripheral Multiplexing
- Address
0x4000303B- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX12Peripheral Multiplexing
- Address
0x4000303C- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX13Peripheral Multiplexing
- Address
0x4000303D- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX14Peripheral Multiplexing
- Address
0x4000303E- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX15Peripheral Multiplexing
- Address
0x4000303F- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PINCFG0Pin Configuration
- Address
0x40003040- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG1Pin Configuration
- Address
0x40003041- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG2Pin Configuration
- Address
0x40003042- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG3Pin Configuration
- Address
0x40003043- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG4Pin Configuration
- Address
0x40003044- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG5Pin Configuration
- Address
0x40003045- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG6Pin Configuration
- Address
0x40003046- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG7Pin Configuration
- Address
0x40003047- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG8Pin Configuration
- Address
0x40003048- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG9Pin Configuration
- Address
0x40003049- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG10Pin Configuration
- Address
0x4000304A- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG11Pin Configuration
- Address
0x4000304B- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG12Pin Configuration
- Address
0x4000304C- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG13Pin Configuration
- Address
0x4000304D- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG14Pin Configuration
- Address
0x4000304E- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG15Pin Configuration
- Address
0x4000304F- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG16Pin Configuration
- Address
0x40003050- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG17Pin Configuration
- Address
0x40003051- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG18Pin Configuration
- Address
0x40003052- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG19Pin Configuration
- Address
0x40003053- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG20Pin Configuration
- Address
0x40003054- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG21Pin Configuration
- Address
0x40003055- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG22Pin Configuration
- Address
0x40003056- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG23Pin Configuration
- Address
0x40003057- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG24Pin Configuration
- Address
0x40003058- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG25Pin Configuration
- Address
0x40003059- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG26Pin Configuration
- Address
0x4000305A- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG27Pin Configuration
- Address
0x4000305B- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG28Pin Configuration
- Address
0x4000305C- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG29Pin Configuration
- Address
0x4000305D- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG30Pin Configuration
- Address
0x4000305E- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG31Pin Configuration
- Address
0x4000305F- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.INTENCLRInterrupt Enable Clear
- Address
0x40003060- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP0.INTENSETInterrupt Enable Set
- Address
0x40003064- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP0.INTFLAGInterrupt Flag Status and Clear
- Address
0x40003068- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check |
GROUP0.NONSECSecurity Attribution
- Address
0x4000306C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NONSEC | 31:0 | Port Security Attribution |
GROUP0.NSCHKSecurity Attribution Check
- Address
0x40003070- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 31:0 | Port Security Attribution Check |
GROUP1.DIRData Direction
- Address
0x40003080- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIR | 31:0 | Port Data Direction |
GROUP1.DIRCLRData Direction Clear
- Address
0x40003084- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRCLR | 31:0 | Port Data Direction Clear |
GROUP1.DIRSETData Direction Set
- Address
0x40003088- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRSET | 31:0 | Port Data Direction Set |
GROUP1.DIRTGLData Direction Toggle
- Address
0x4000308C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRTGL | 31:0 | Port Data Direction Toggle |
GROUP1.OUTData Output Value
- Address
0x40003090- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUT | 31:0 | PORT Data Output Value |
GROUP1.OUTCLRData Output Value Clear
- Address
0x40003094- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTCLR | 31:0 | PORT Data Output Value Clear |
GROUP1.OUTSETData Output Value Set
- Address
0x40003098- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTSET | 31:0 | PORT Data Output Value Set |
GROUP1.OUTTGLData Output Value Toggle
- Address
0x4000309C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTTGL | 31:0 | PORT Data Output Value Toggle |
GROUP1.INData Input Value
- Address
0x400030A0- Reset
0x00000000- Access
- read only
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| IN | 31:0 | PORT Data Input Value |
GROUP1.CTRLControl
- Address
0x400030A4- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| SAMPLING | 31:0 | Input Sampling Mode |
GROUP1.WRCONFIGWrite Configuration
- Address
0x400030A8- Reset
0x00000000- Access
- write only
- Size
- 32-bit
9 fields
| Field | Bits | What it does |
|---|---|---|
| WRPINCFG | 30 | Write PINCFG |
| WRPMUX | 28 | Write PMUX |
| PMUX | 27:24 | Peripheral Multiplexing |
| DRVSTR | 22 | Output Driver Strength Selection |
| PULLEN | 18 | Pull Enable |
| INEN | 17 | Input Enable |
| PMUXEN | 16 | Peripheral Multiplexer Enable |
| PINMASK | 15:0 | Pin Mask for Multiple Pin Configuration |
| HWSEL | 31 | Half-Word Select |
GROUP1.EVCTRLEvent Input Control
- Address
0x400030AC- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
12 fields
| Field | Bits | What it does |
|---|---|---|
| EVACT3 | 30:29 | PORT Event Action 3 |
| PID3 | 28:24 | PORT Event Pin Identifier 3 |
| PORTEI2 | 23 | PORT Event Input Enable 2 |
| EVACT2 | 22:21 | PORT Event Action 2 |
| PID2 | 20:16 | PORT Event Pin Identifier 2 |
| PORTEI1 | 15 | PORT Event Input Enable 1 |
| EVACT1 | 14:13 | PORT Event Action 1 |
| PID1 | 12:8 | PORT Event Pin Identifier 1 |
| PORTEI0 | 7 | PORT Event Input Enable 0 |
| EVACT0 | 6:5 | PORT Event Action 0
|
| PID0 | 4:0 | PORT Event Pin Identifier 0 |
| PORTEI3 | 31 | PORT Event Input Enable 3 |
GROUP1.PMUX0Peripheral Multiplexing
- Address
0x400030B0- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX1Peripheral Multiplexing
- Address
0x400030B1- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX2Peripheral Multiplexing
- Address
0x400030B2- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX3Peripheral Multiplexing
- Address
0x400030B3- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX4Peripheral Multiplexing
- Address
0x400030B4- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX5Peripheral Multiplexing
- Address
0x400030B5- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX6Peripheral Multiplexing
- Address
0x400030B6- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX7Peripheral Multiplexing
- Address
0x400030B7- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX8Peripheral Multiplexing
- Address
0x400030B8- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX9Peripheral Multiplexing
- Address
0x400030B9- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX10Peripheral Multiplexing
- Address
0x400030BA- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX11Peripheral Multiplexing
- Address
0x400030BB- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX12Peripheral Multiplexing
- Address
0x400030BC- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX13Peripheral Multiplexing
- Address
0x400030BD- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX14Peripheral Multiplexing
- Address
0x400030BE- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX15Peripheral Multiplexing
- Address
0x400030BF- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PINCFG0Pin Configuration
- Address
0x400030C0- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG1Pin Configuration
- Address
0x400030C1- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG2Pin Configuration
- Address
0x400030C2- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG3Pin Configuration
- Address
0x400030C3- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG4Pin Configuration
- Address
0x400030C4- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG5Pin Configuration
- Address
0x400030C5- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG6Pin Configuration
- Address
0x400030C6- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG7Pin Configuration
- Address
0x400030C7- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG8Pin Configuration
- Address
0x400030C8- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG9Pin Configuration
- Address
0x400030C9- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG10Pin Configuration
- Address
0x400030CA- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG11Pin Configuration
- Address
0x400030CB- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG12Pin Configuration
- Address
0x400030CC- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG13Pin Configuration
- Address
0x400030CD- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG14Pin Configuration
- Address
0x400030CE- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG15Pin Configuration
- Address
0x400030CF- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG16Pin Configuration
- Address
0x400030D0- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG17Pin Configuration
- Address
0x400030D1- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG18Pin Configuration
- Address
0x400030D2- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG19Pin Configuration
- Address
0x400030D3- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG20Pin Configuration
- Address
0x400030D4- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG21Pin Configuration
- Address
0x400030D5- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG22Pin Configuration
- Address
0x400030D6- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG23Pin Configuration
- Address
0x400030D7- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG24Pin Configuration
- Address
0x400030D8- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG25Pin Configuration
- Address
0x400030D9- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG26Pin Configuration
- Address
0x400030DA- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG27Pin Configuration
- Address
0x400030DB- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG28Pin Configuration
- Address
0x400030DC- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG29Pin Configuration
- Address
0x400030DD- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG30Pin Configuration
- Address
0x400030DE- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG31Pin Configuration
- Address
0x400030DF- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.INTENCLRInterrupt Enable Clear
- Address
0x400030E0- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP1.INTENSETInterrupt Enable Set
- Address
0x400030E4- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP1.INTFLAGInterrupt Flag Status and Clear
- Address
0x400030E8- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check |
GROUP1.NONSECSecurity Attribution
- Address
0x400030EC- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NONSEC | 31:0 | Port Security Attribution |
GROUP1.NSCHKSecurity Attribution Check
- Address
0x400030F0- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 31:0 | Port Security Attribution Check |
GROUP0.DIRData Direction
- Address
0x40003200- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIR | 31:0 | Port Data Direction |
GROUP0.DIRCLRData Direction Clear
- Address
0x40003204- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRCLR | 31:0 | Port Data Direction Clear |
GROUP0.DIRSETData Direction Set
- Address
0x40003208- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRSET | 31:0 | Port Data Direction Set |
GROUP0.DIRTGLData Direction Toggle
- Address
0x4000320C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRTGL | 31:0 | Port Data Direction Toggle |
GROUP0.OUTData Output Value
- Address
0x40003210- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUT | 31:0 | PORT Data Output Value |
GROUP0.OUTCLRData Output Value Clear
- Address
0x40003214- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTCLR | 31:0 | PORT Data Output Value Clear |
GROUP0.OUTSETData Output Value Set
- Address
0x40003218- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTSET | 31:0 | PORT Data Output Value Set |
GROUP0.OUTTGLData Output Value Toggle
- Address
0x4000321C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTTGL | 31:0 | PORT Data Output Value Toggle |
GROUP0.INData Input Value
- Address
0x40003220- Reset
0x00000000- Access
- read only
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| IN | 31:0 | PORT Data Input Value |
GROUP0.CTRLControl
- Address
0x40003224- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| SAMPLING | 31:0 | Input Sampling Mode |
GROUP0.WRCONFIGWrite Configuration
- Address
0x40003228- Reset
0x00000000- Access
- write only
- Size
- 32-bit
9 fields
| Field | Bits | What it does |
|---|---|---|
| WRPINCFG | 30 | Write PINCFG |
| WRPMUX | 28 | Write PMUX |
| PMUX | 27:24 | Peripheral Multiplexing |
| DRVSTR | 22 | Output Driver Strength Selection |
| PULLEN | 18 | Pull Enable |
| INEN | 17 | Input Enable |
| PMUXEN | 16 | Peripheral Multiplexer Enable |
| PINMASK | 15:0 | Pin Mask for Multiple Pin Configuration |
| HWSEL | 31 | Half-Word Select |
GROUP0.EVCTRLEvent Input Control
- Address
0x4000322C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
12 fields
| Field | Bits | What it does |
|---|---|---|
| EVACT3 | 30:29 | PORT Event Action 3 |
| PID3 | 28:24 | PORT Event Pin Identifier 3 |
| PORTEI2 | 23 | PORT Event Input Enable 2 |
| EVACT2 | 22:21 | PORT Event Action 2 |
| PID2 | 20:16 | PORT Event Pin Identifier 2 |
| PORTEI1 | 15 | PORT Event Input Enable 1 |
| EVACT1 | 14:13 | PORT Event Action 1 |
| PID1 | 12:8 | PORT Event Pin Identifier 1 |
| PORTEI0 | 7 | PORT Event Input Enable 0 |
| EVACT0 | 6:5 | PORT Event Action 0
|
| PID0 | 4:0 | PORT Event Pin Identifier 0 |
| PORTEI3 | 31 | PORT Event Input Enable 3 |
GROUP0.PMUX0Peripheral Multiplexing
- Address
0x40003230- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX1Peripheral Multiplexing
- Address
0x40003231- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX2Peripheral Multiplexing
- Address
0x40003232- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX3Peripheral Multiplexing
- Address
0x40003233- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX4Peripheral Multiplexing
- Address
0x40003234- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX5Peripheral Multiplexing
- Address
0x40003235- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX6Peripheral Multiplexing
- Address
0x40003236- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX7Peripheral Multiplexing
- Address
0x40003237- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX8Peripheral Multiplexing
- Address
0x40003238- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX9Peripheral Multiplexing
- Address
0x40003239- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX10Peripheral Multiplexing
- Address
0x4000323A- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX11Peripheral Multiplexing
- Address
0x4000323B- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX12Peripheral Multiplexing
- Address
0x4000323C- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX13Peripheral Multiplexing
- Address
0x4000323D- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX14Peripheral Multiplexing
- Address
0x4000323E- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX15Peripheral Multiplexing
- Address
0x4000323F- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PINCFG0Pin Configuration
- Address
0x40003240- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG1Pin Configuration
- Address
0x40003241- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG2Pin Configuration
- Address
0x40003242- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG3Pin Configuration
- Address
0x40003243- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG4Pin Configuration
- Address
0x40003244- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG5Pin Configuration
- Address
0x40003245- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG6Pin Configuration
- Address
0x40003246- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG7Pin Configuration
- Address
0x40003247- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG8Pin Configuration
- Address
0x40003248- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG9Pin Configuration
- Address
0x40003249- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG10Pin Configuration
- Address
0x4000324A- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG11Pin Configuration
- Address
0x4000324B- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG12Pin Configuration
- Address
0x4000324C- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG13Pin Configuration
- Address
0x4000324D- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG14Pin Configuration
- Address
0x4000324E- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG15Pin Configuration
- Address
0x4000324F- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG16Pin Configuration
- Address
0x40003250- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG17Pin Configuration
- Address
0x40003251- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG18Pin Configuration
- Address
0x40003252- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG19Pin Configuration
- Address
0x40003253- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG20Pin Configuration
- Address
0x40003254- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG21Pin Configuration
- Address
0x40003255- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG22Pin Configuration
- Address
0x40003256- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG23Pin Configuration
- Address
0x40003257- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG24Pin Configuration
- Address
0x40003258- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG25Pin Configuration
- Address
0x40003259- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG26Pin Configuration
- Address
0x4000325A- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG27Pin Configuration
- Address
0x4000325B- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG28Pin Configuration
- Address
0x4000325C- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG29Pin Configuration
- Address
0x4000325D- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG30Pin Configuration
- Address
0x4000325E- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG31Pin Configuration
- Address
0x4000325F- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.INTENCLRInterrupt Enable Clear
- Address
0x40003260- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP0.INTENSETInterrupt Enable Set
- Address
0x40003264- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP0.INTFLAGInterrupt Flag Status and Clear
- Address
0x40003268- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check |
GROUP0.NONSECSecurity Attribution
- Address
0x4000326C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NONSEC | 31:0 | Port Security Attribution |
GROUP0.NSCHKSecurity Attribution Check
- Address
0x40003270- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 31:0 | Port Security Attribution Check |
GROUP1.DIRData Direction
- Address
0x40003280- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIR | 31:0 | Port Data Direction |
GROUP1.DIRCLRData Direction Clear
- Address
0x40003284- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRCLR | 31:0 | Port Data Direction Clear |
GROUP1.DIRSETData Direction Set
- Address
0x40003288- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRSET | 31:0 | Port Data Direction Set |
GROUP1.DIRTGLData Direction Toggle
- Address
0x4000328C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRTGL | 31:0 | Port Data Direction Toggle |
GROUP1.OUTData Output Value
- Address
0x40003290- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUT | 31:0 | PORT Data Output Value |
GROUP1.OUTCLRData Output Value Clear
- Address
0x40003294- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTCLR | 31:0 | PORT Data Output Value Clear |
GROUP1.OUTSETData Output Value Set
- Address
0x40003298- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTSET | 31:0 | PORT Data Output Value Set |
GROUP1.OUTTGLData Output Value Toggle
- Address
0x4000329C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTTGL | 31:0 | PORT Data Output Value Toggle |
GROUP1.INData Input Value
- Address
0x400032A0- Reset
0x00000000- Access
- read only
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| IN | 31:0 | PORT Data Input Value |
GROUP1.CTRLControl
- Address
0x400032A4- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| SAMPLING | 31:0 | Input Sampling Mode |
GROUP1.WRCONFIGWrite Configuration
- Address
0x400032A8- Reset
0x00000000- Access
- write only
- Size
- 32-bit
9 fields
| Field | Bits | What it does |
|---|---|---|
| WRPINCFG | 30 | Write PINCFG |
| WRPMUX | 28 | Write PMUX |
| PMUX | 27:24 | Peripheral Multiplexing |
| DRVSTR | 22 | Output Driver Strength Selection |
| PULLEN | 18 | Pull Enable |
| INEN | 17 | Input Enable |
| PMUXEN | 16 | Peripheral Multiplexer Enable |
| PINMASK | 15:0 | Pin Mask for Multiple Pin Configuration |
| HWSEL | 31 | Half-Word Select |
GROUP1.EVCTRLEvent Input Control
- Address
0x400032AC- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
12 fields
| Field | Bits | What it does |
|---|---|---|
| EVACT3 | 30:29 | PORT Event Action 3 |
| PID3 | 28:24 | PORT Event Pin Identifier 3 |
| PORTEI2 | 23 | PORT Event Input Enable 2 |
| EVACT2 | 22:21 | PORT Event Action 2 |
| PID2 | 20:16 | PORT Event Pin Identifier 2 |
| PORTEI1 | 15 | PORT Event Input Enable 1 |
| EVACT1 | 14:13 | PORT Event Action 1 |
| PID1 | 12:8 | PORT Event Pin Identifier 1 |
| PORTEI0 | 7 | PORT Event Input Enable 0 |
| EVACT0 | 6:5 | PORT Event Action 0
|
| PID0 | 4:0 | PORT Event Pin Identifier 0 |
| PORTEI3 | 31 | PORT Event Input Enable 3 |
GROUP1.PMUX0Peripheral Multiplexing
- Address
0x400032B0- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX1Peripheral Multiplexing
- Address
0x400032B1- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX2Peripheral Multiplexing
- Address
0x400032B2- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX3Peripheral Multiplexing
- Address
0x400032B3- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX4Peripheral Multiplexing
- Address
0x400032B4- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX5Peripheral Multiplexing
- Address
0x400032B5- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX6Peripheral Multiplexing
- Address
0x400032B6- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX7Peripheral Multiplexing
- Address
0x400032B7- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX8Peripheral Multiplexing
- Address
0x400032B8- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX9Peripheral Multiplexing
- Address
0x400032B9- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX10Peripheral Multiplexing
- Address
0x400032BA- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX11Peripheral Multiplexing
- Address
0x400032BB- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX12Peripheral Multiplexing
- Address
0x400032BC- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX13Peripheral Multiplexing
- Address
0x400032BD- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX14Peripheral Multiplexing
- Address
0x400032BE- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX15Peripheral Multiplexing
- Address
0x400032BF- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PINCFG0Pin Configuration
- Address
0x400032C0- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG1Pin Configuration
- Address
0x400032C1- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG2Pin Configuration
- Address
0x400032C2- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG3Pin Configuration
- Address
0x400032C3- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG4Pin Configuration
- Address
0x400032C4- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG5Pin Configuration
- Address
0x400032C5- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG6Pin Configuration
- Address
0x400032C6- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG7Pin Configuration
- Address
0x400032C7- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG8Pin Configuration
- Address
0x400032C8- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG9Pin Configuration
- Address
0x400032C9- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG10Pin Configuration
- Address
0x400032CA- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG11Pin Configuration
- Address
0x400032CB- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG12Pin Configuration
- Address
0x400032CC- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG13Pin Configuration
- Address
0x400032CD- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG14Pin Configuration
- Address
0x400032CE- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG15Pin Configuration
- Address
0x400032CF- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG16Pin Configuration
- Address
0x400032D0- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG17Pin Configuration
- Address
0x400032D1- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG18Pin Configuration
- Address
0x400032D2- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG19Pin Configuration
- Address
0x400032D3- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG20Pin Configuration
- Address
0x400032D4- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG21Pin Configuration
- Address
0x400032D5- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG22Pin Configuration
- Address
0x400032D6- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG23Pin Configuration
- Address
0x400032D7- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG24Pin Configuration
- Address
0x400032D8- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG25Pin Configuration
- Address
0x400032D9- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG26Pin Configuration
- Address
0x400032DA- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG27Pin Configuration
- Address
0x400032DB- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG28Pin Configuration
- Address
0x400032DC- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG29Pin Configuration
- Address
0x400032DD- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG30Pin Configuration
- Address
0x400032DE- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG31Pin Configuration
- Address
0x400032DF- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.INTENCLRInterrupt Enable Clear
- Address
0x400032E0- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP1.INTENSETInterrupt Enable Set
- Address
0x400032E4- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP1.INTFLAGInterrupt Flag Status and Clear
- Address
0x400032E8- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check |
GROUP1.NONSECSecurity Attribution
- Address
0x400032EC- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NONSEC | 31:0 | Port Security Attribution |
GROUP1.NSCHKSecurity Attribution Check
- Address
0x400032F0- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 31:0 | Port Security Attribution Check |
GROUP0.DIRData Direction
- Address
0x60000200- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIR | 31:0 | Port Data Direction |
GROUP0.DIRCLRData Direction Clear
- Address
0x60000204- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRCLR | 31:0 | Port Data Direction Clear |
GROUP0.DIRSETData Direction Set
- Address
0x60000208- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRSET | 31:0 | Port Data Direction Set |
GROUP0.DIRTGLData Direction Toggle
- Address
0x6000020C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRTGL | 31:0 | Port Data Direction Toggle |
GROUP0.OUTData Output Value
- Address
0x60000210- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUT | 31:0 | PORT Data Output Value |
GROUP0.OUTCLRData Output Value Clear
- Address
0x60000214- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTCLR | 31:0 | PORT Data Output Value Clear |
GROUP0.OUTSETData Output Value Set
- Address
0x60000218- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTSET | 31:0 | PORT Data Output Value Set |
GROUP0.OUTTGLData Output Value Toggle
- Address
0x6000021C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTTGL | 31:0 | PORT Data Output Value Toggle |
GROUP0.INData Input Value
- Address
0x60000220- Reset
0x00000000- Access
- read only
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| IN | 31:0 | PORT Data Input Value |
GROUP0.CTRLControl
- Address
0x60000224- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| SAMPLING | 31:0 | Input Sampling Mode |
GROUP0.WRCONFIGWrite Configuration
- Address
0x60000228- Reset
0x00000000- Access
- write only
- Size
- 32-bit
9 fields
| Field | Bits | What it does |
|---|---|---|
| WRPINCFG | 30 | Write PINCFG |
| WRPMUX | 28 | Write PMUX |
| PMUX | 27:24 | Peripheral Multiplexing |
| DRVSTR | 22 | Output Driver Strength Selection |
| PULLEN | 18 | Pull Enable |
| INEN | 17 | Input Enable |
| PMUXEN | 16 | Peripheral Multiplexer Enable |
| PINMASK | 15:0 | Pin Mask for Multiple Pin Configuration |
| HWSEL | 31 | Half-Word Select |
GROUP0.EVCTRLEvent Input Control
- Address
0x6000022C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
12 fields
| Field | Bits | What it does |
|---|---|---|
| EVACT3 | 30:29 | PORT Event Action 3 |
| PID3 | 28:24 | PORT Event Pin Identifier 3 |
| PORTEI2 | 23 | PORT Event Input Enable 2 |
| EVACT2 | 22:21 | PORT Event Action 2 |
| PID2 | 20:16 | PORT Event Pin Identifier 2 |
| PORTEI1 | 15 | PORT Event Input Enable 1 |
| EVACT1 | 14:13 | PORT Event Action 1 |
| PID1 | 12:8 | PORT Event Pin Identifier 1 |
| PORTEI0 | 7 | PORT Event Input Enable 0 |
| EVACT0 | 6:5 | PORT Event Action 0
|
| PID0 | 4:0 | PORT Event Pin Identifier 0 |
| PORTEI3 | 31 | PORT Event Input Enable 3 |
GROUP0.PMUX0Peripheral Multiplexing
- Address
0x60000230- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX1Peripheral Multiplexing
- Address
0x60000231- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX2Peripheral Multiplexing
- Address
0x60000232- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX3Peripheral Multiplexing
- Address
0x60000233- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX4Peripheral Multiplexing
- Address
0x60000234- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX5Peripheral Multiplexing
- Address
0x60000235- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX6Peripheral Multiplexing
- Address
0x60000236- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX7Peripheral Multiplexing
- Address
0x60000237- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX8Peripheral Multiplexing
- Address
0x60000238- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX9Peripheral Multiplexing
- Address
0x60000239- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX10Peripheral Multiplexing
- Address
0x6000023A- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX11Peripheral Multiplexing
- Address
0x6000023B- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX12Peripheral Multiplexing
- Address
0x6000023C- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX13Peripheral Multiplexing
- Address
0x6000023D- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX14Peripheral Multiplexing
- Address
0x6000023E- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PMUX15Peripheral Multiplexing
- Address
0x6000023F- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP0.PINCFG0Pin Configuration
- Address
0x60000240- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG1Pin Configuration
- Address
0x60000241- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG2Pin Configuration
- Address
0x60000242- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG3Pin Configuration
- Address
0x60000243- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG4Pin Configuration
- Address
0x60000244- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG5Pin Configuration
- Address
0x60000245- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG6Pin Configuration
- Address
0x60000246- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG7Pin Configuration
- Address
0x60000247- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG8Pin Configuration
- Address
0x60000248- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG9Pin Configuration
- Address
0x60000249- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG10Pin Configuration
- Address
0x6000024A- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG11Pin Configuration
- Address
0x6000024B- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG12Pin Configuration
- Address
0x6000024C- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG13Pin Configuration
- Address
0x6000024D- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG14Pin Configuration
- Address
0x6000024E- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG15Pin Configuration
- Address
0x6000024F- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG16Pin Configuration
- Address
0x60000250- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG17Pin Configuration
- Address
0x60000251- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG18Pin Configuration
- Address
0x60000252- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG19Pin Configuration
- Address
0x60000253- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG20Pin Configuration
- Address
0x60000254- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG21Pin Configuration
- Address
0x60000255- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG22Pin Configuration
- Address
0x60000256- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG23Pin Configuration
- Address
0x60000257- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG24Pin Configuration
- Address
0x60000258- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG25Pin Configuration
- Address
0x60000259- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG26Pin Configuration
- Address
0x6000025A- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG27Pin Configuration
- Address
0x6000025B- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG28Pin Configuration
- Address
0x6000025C- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG29Pin Configuration
- Address
0x6000025D- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG30Pin Configuration
- Address
0x6000025E- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.PINCFG31Pin Configuration
- Address
0x6000025F- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP0.INTENCLRInterrupt Enable Clear
- Address
0x60000260- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP0.INTENSETInterrupt Enable Set
- Address
0x60000264- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP0.INTFLAGInterrupt Flag Status and Clear
- Address
0x60000268- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check |
GROUP0.NONSECSecurity Attribution
- Address
0x6000026C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NONSEC | 31:0 | Port Security Attribution |
GROUP0.NSCHKSecurity Attribution Check
- Address
0x60000270- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 31:0 | Port Security Attribution Check |
GROUP1.DIRData Direction
- Address
0x60000280- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIR | 31:0 | Port Data Direction |
GROUP1.DIRCLRData Direction Clear
- Address
0x60000284- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRCLR | 31:0 | Port Data Direction Clear |
GROUP1.DIRSETData Direction Set
- Address
0x60000288- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRSET | 31:0 | Port Data Direction Set |
GROUP1.DIRTGLData Direction Toggle
- Address
0x6000028C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| DIRTGL | 31:0 | Port Data Direction Toggle |
GROUP1.OUTData Output Value
- Address
0x60000290- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUT | 31:0 | PORT Data Output Value |
GROUP1.OUTCLRData Output Value Clear
- Address
0x60000294- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTCLR | 31:0 | PORT Data Output Value Clear |
GROUP1.OUTSETData Output Value Set
- Address
0x60000298- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTSET | 31:0 | PORT Data Output Value Set |
GROUP1.OUTTGLData Output Value Toggle
- Address
0x6000029C- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| OUTTGL | 31:0 | PORT Data Output Value Toggle |
GROUP1.INData Input Value
- Address
0x600002A0- Reset
0x00000000- Access
- read only
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| IN | 31:0 | PORT Data Input Value |
GROUP1.CTRLControl
- Address
0x600002A4- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| SAMPLING | 31:0 | Input Sampling Mode |
GROUP1.WRCONFIGWrite Configuration
- Address
0x600002A8- Reset
0x00000000- Access
- write only
- Size
- 32-bit
9 fields
| Field | Bits | What it does |
|---|---|---|
| WRPINCFG | 30 | Write PINCFG |
| WRPMUX | 28 | Write PMUX |
| PMUX | 27:24 | Peripheral Multiplexing |
| DRVSTR | 22 | Output Driver Strength Selection |
| PULLEN | 18 | Pull Enable |
| INEN | 17 | Input Enable |
| PMUXEN | 16 | Peripheral Multiplexer Enable |
| PINMASK | 15:0 | Pin Mask for Multiple Pin Configuration |
| HWSEL | 31 | Half-Word Select |
GROUP1.EVCTRLEvent Input Control
- Address
0x600002AC- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
12 fields
| Field | Bits | What it does |
|---|---|---|
| EVACT3 | 30:29 | PORT Event Action 3 |
| PID3 | 28:24 | PORT Event Pin Identifier 3 |
| PORTEI2 | 23 | PORT Event Input Enable 2 |
| EVACT2 | 22:21 | PORT Event Action 2 |
| PID2 | 20:16 | PORT Event Pin Identifier 2 |
| PORTEI1 | 15 | PORT Event Input Enable 1 |
| EVACT1 | 14:13 | PORT Event Action 1 |
| PID1 | 12:8 | PORT Event Pin Identifier 1 |
| PORTEI0 | 7 | PORT Event Input Enable 0 |
| EVACT0 | 6:5 | PORT Event Action 0
|
| PID0 | 4:0 | PORT Event Pin Identifier 0 |
| PORTEI3 | 31 | PORT Event Input Enable 3 |
GROUP1.PMUX0Peripheral Multiplexing
- Address
0x600002B0- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX1Peripheral Multiplexing
- Address
0x600002B1- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX2Peripheral Multiplexing
- Address
0x600002B2- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX3Peripheral Multiplexing
- Address
0x600002B3- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX4Peripheral Multiplexing
- Address
0x600002B4- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX5Peripheral Multiplexing
- Address
0x600002B5- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX6Peripheral Multiplexing
- Address
0x600002B6- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX7Peripheral Multiplexing
- Address
0x600002B7- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX8Peripheral Multiplexing
- Address
0x600002B8- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX9Peripheral Multiplexing
- Address
0x600002B9- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX10Peripheral Multiplexing
- Address
0x600002BA- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX11Peripheral Multiplexing
- Address
0x600002BB- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX12Peripheral Multiplexing
- Address
0x600002BC- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX13Peripheral Multiplexing
- Address
0x600002BD- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX14Peripheral Multiplexing
- Address
0x600002BE- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PMUX15Peripheral Multiplexing
- Address
0x600002BF- Reset
0x00- Access
- read/write
- 7PMUXO3
- 6PMUXO2
- 5PMUXO1
- 4PMUXO0
- 3PMUXE3
- 2PMUXE2
- 1PMUXE1
- 0PMUXE0
2 fields
| Field | Bits | What it does |
|---|---|---|
| PMUXO | 7:4 | Peripheral Multiplexing for Odd-Numbered Pin
|
| PMUXE | 3:0 | Peripheral Multiplexing for Even-Numbered Pin
|
GROUP1.PINCFG0Pin Configuration
- Address
0x600002C0- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG1Pin Configuration
- Address
0x600002C1- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG2Pin Configuration
- Address
0x600002C2- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG3Pin Configuration
- Address
0x600002C3- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG4Pin Configuration
- Address
0x600002C4- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG5Pin Configuration
- Address
0x600002C5- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG6Pin Configuration
- Address
0x600002C6- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG7Pin Configuration
- Address
0x600002C7- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG8Pin Configuration
- Address
0x600002C8- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG9Pin Configuration
- Address
0x600002C9- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG10Pin Configuration
- Address
0x600002CA- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG11Pin Configuration
- Address
0x600002CB- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG12Pin Configuration
- Address
0x600002CC- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG13Pin Configuration
- Address
0x600002CD- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG14Pin Configuration
- Address
0x600002CE- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG15Pin Configuration
- Address
0x600002CF- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG16Pin Configuration
- Address
0x600002D0- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG17Pin Configuration
- Address
0x600002D1- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG18Pin Configuration
- Address
0x600002D2- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG19Pin Configuration
- Address
0x600002D3- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG20Pin Configuration
- Address
0x600002D4- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG21Pin Configuration
- Address
0x600002D5- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG22Pin Configuration
- Address
0x600002D6- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG23Pin Configuration
- Address
0x600002D7- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG24Pin Configuration
- Address
0x600002D8- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG25Pin Configuration
- Address
0x600002D9- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG26Pin Configuration
- Address
0x600002DA- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG27Pin Configuration
- Address
0x600002DB- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG28Pin Configuration
- Address
0x600002DC- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG29Pin Configuration
- Address
0x600002DD- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG30Pin Configuration
- Address
0x600002DE- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.PINCFG31Pin Configuration
- Address
0x600002DF- Reset
0x00- Access
- read/write
- 7–
- 6DRVSTR
- 5–
- 4–
- 3–
- 2PULLEN
- 1INEN
- 0PMUXEN
4 fields
| Field | Bits | What it does |
|---|---|---|
| DRVSTR | 6 | Output Driver Strength Selection |
| PULLEN | 2 | Pull Enable |
| INEN | 1 | Input Enable |
| PMUXEN | 0 | Peripheral Multiplexer Enable |
GROUP1.INTENCLRInterrupt Enable Clear
- Address
0x600002E0- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP1.INTENSETInterrupt Enable Set
- Address
0x600002E4- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check Interrupt Enable |
GROUP1.INTFLAGInterrupt Flag Status and Clear
- Address
0x600002E8- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 0 | Non-Secure Check |
GROUP1.NONSECSecurity Attribution
- Address
0x600002EC- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NONSEC | 31:0 | Port Security Attribution |
GROUP1.NSCHKSecurity Attribution Check
- Address
0x600002F0- Reset
0x00000000- Access
- read/write
- Size
- 32-bit
1 field
| Field | Bits | What it does |
|---|---|---|
| NSCHK | 31:0 | Port Security Attribution Check |