PIC32CM5164LS60100 EVSYS Registers – 256 with their bits and fields

CTRLAControl

Address: 0x42000000
Reset: 0x00
Access: write only

7–
6–
5–
4–
3–
2–
1–
0SWRST

1 field

Field	Bits	What it does
SWRST	0	Software Reset

SWEVTSoftware Event

Address: 0x42000004
Reset: 0x00000000
Access: write only
Size: 32-bit

12 fields

Field	Bits	What it does
CHANNEL11	11	Channel 11 Software Selection
CHANNEL10	10	Channel 10 Software Selection
CHANNEL9	9	Channel 9 Software Selection
CHANNEL8	8	Channel 8 Software Selection
CHANNEL7	7	Channel 7 Software Selection
CHANNEL6	6	Channel 6 Software Selection
CHANNEL5	5	Channel 5 Software Selection
CHANNEL4	4	Channel 4 Software Selection
CHANNEL3	3	Channel 3 Software Selection
CHANNEL2	2	Channel 2 Software Selection
CHANNEL1	1	Channel 1 Software Selection
CHANNEL0	0	Channel 0 Software Selection

PRICTRLPriority Control

Address: 0x42000008
Reset: 0x00
Access: read/write

7RREN
6–
5–
4–
3–
2PRI2
1PRI1
0PRI0

2 fields

Field	Bits	What it does
RREN	7	Round-Robin Scheduling Enable
PRI	2:0	Channel Priority Number

INTPENDChannel Pending Interrupt

Address: 0x42000010
Reset: 0x4000
Access: read/write
Size: 16-bit

5 fields

Field	Bits	What it does
BUSY	15	Busy
READY	14	Ready
EVD	9	Channel Event Detected
OVR	8	Channel Overrun
ID	2:0	Channel ID

INTSTATUSInterrupt Status

Address: 0x42000014
Reset: 0x00000000
Access: read only
Size: 32-bit

8 fields

Field	Bits	What it does
CHINT7	7	Channel 7 Pending Interrupt
CHINT6	6	Channel 6 Pending Interrupt
CHINT5	5	Channel 5 Pending Interrupt
CHINT4	4	Channel 4 Pending Interrupt
CHINT3	3	Channel 3 Pending Interrupt
CHINT2	2	Channel 2 Pending Interrupt
CHINT1	1	Channel 1 Pending Interrupt
CHINT0	0	Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address: 0x42000018
Reset: 0x00000000
Access: read only
Size: 32-bit

8 fields

Field	Bits	What it does
BUSYCH7	7	Busy Channel 7
BUSYCH6	6	Busy Channel 6
BUSYCH5	5	Busy Channel 5
BUSYCH4	4	Busy Channel 4
BUSYCH3	3	Busy Channel 3
BUSYCH2	2	Busy Channel 2
BUSYCH1	1	Busy Channel 1
BUSYCH0	0	Busy Channel 0

READYUSRReady Users

Address: 0x4200001C
Reset: 0xFFFFFFFF
Access: read only
Size: 32-bit

8 fields

Field	Bits	What it does
READYUSR7	7	Ready User for Channel 7
READYUSR6	6	Ready User for Channel 6
READYUSR5	5	Ready User for Channel 5
READYUSR4	4	Ready User for Channel 4
READYUSR3	3	Ready User for Channel 3
READYUSR2	2	Ready User for Channel 2
READYUSR1	1	Ready User for Channel 1
READYUSR0	0	Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address: 0x42000020
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000024
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000025
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000026
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address: 0x42000027
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL1.CHANNELChannel n Control

Address: 0x42000028
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200002C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200002D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200002E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address: 0x4200002F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL2.CHANNELChannel n Control

Address: 0x42000030
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000034
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000035
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000036
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address: 0x42000037
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL3.CHANNELChannel n Control

Address: 0x42000038
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200003C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200003D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200003E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address: 0x4200003F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL4.CHANNELChannel n Control

Address: 0x42000040
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000044
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000045
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000046
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address: 0x42000047
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL5.CHANNELChannel n Control

Address: 0x42000048
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200004C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200004D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200004E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address: 0x4200004F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL6.CHANNELChannel n Control

Address: 0x42000050
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000054
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000055
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000056
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address: 0x42000057
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL7.CHANNELChannel n Control

Address: 0x42000058
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200005C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200005D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200005E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address: 0x4200005F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL8.CHANNELChannel n Control

Address: 0x42000060
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL8.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000064
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL8.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000065
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL8.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000066
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL8.CHSTATUSChannel n Status

Address: 0x42000067
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL9.CHANNELChannel n Control

Address: 0x42000068
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL9.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200006C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL9.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200006D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL9.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200006E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL9.CHSTATUSChannel n Status

Address: 0x4200006F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL10.CHANNELChannel n Control

Address: 0x42000070
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL10.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000074
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL10.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000075
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL10.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000076
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL10.CHSTATUSChannel n Status

Address: 0x42000077
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL11.CHANNELChannel n Control

Address: 0x42000078
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL11.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200007C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL11.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200007D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL11.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200007E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL11.CHSTATUSChannel n Status

Address: 0x4200007F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

USER0User Multiplexer n

Address: 0x42000120
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER1User Multiplexer n

Address: 0x42000121
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER2User Multiplexer n

Address: 0x42000122
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER3User Multiplexer n

Address: 0x42000123
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER4User Multiplexer n

Address: 0x42000124
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER5User Multiplexer n

Address: 0x42000125
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER6User Multiplexer n

Address: 0x42000126
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER7User Multiplexer n

Address: 0x42000127
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER8User Multiplexer n

Address: 0x42000128
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER9User Multiplexer n

Address: 0x42000129
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER10User Multiplexer n

Address: 0x4200012A
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER11User Multiplexer n

Address: 0x4200012B
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER12User Multiplexer n

Address: 0x4200012C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER13User Multiplexer n

Address: 0x4200012D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER14User Multiplexer n

Address: 0x4200012E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER15User Multiplexer n

Address: 0x4200012F
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER16User Multiplexer n

Address: 0x42000130
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER17User Multiplexer n

Address: 0x42000131
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER18User Multiplexer n

Address: 0x42000132
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER19User Multiplexer n

Address: 0x42000133
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER20User Multiplexer n

Address: 0x42000134
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER21User Multiplexer n

Address: 0x42000135
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER22User Multiplexer n

Address: 0x42000136
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER23User Multiplexer n

Address: 0x42000137
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER24User Multiplexer n

Address: 0x42000138
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER25User Multiplexer n

Address: 0x42000139
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER26User Multiplexer n

Address: 0x4200013A
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER27User Multiplexer n

Address: 0x4200013B
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER28User Multiplexer n

Address: 0x4200013C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER29User Multiplexer n

Address: 0x4200013D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER30User Multiplexer n

Address: 0x4200013E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER31User Multiplexer n

Address: 0x4200013F
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER32User Multiplexer n

Address: 0x42000140
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER33User Multiplexer n

Address: 0x42000141
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER34User Multiplexer n

Address: 0x42000142
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER35User Multiplexer n

Address: 0x42000143
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER36User Multiplexer n

Address: 0x42000144
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER37User Multiplexer n

Address: 0x42000145
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER38User Multiplexer n

Address: 0x42000146
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER39User Multiplexer n

Address: 0x42000147
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER40User Multiplexer n

Address: 0x42000148
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER41User Multiplexer n

Address: 0x42000149
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER42User Multiplexer n

Address: 0x4200014A
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER43User Multiplexer n

Address: 0x4200014B
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER44User Multiplexer n

Address: 0x4200014C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER45User Multiplexer n

Address: 0x4200014D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER46User Multiplexer n

Address: 0x4200014E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER47User Multiplexer n

Address: 0x4200014F
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER48User Multiplexer n

Address: 0x42000150
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER49User Multiplexer n

Address: 0x42000151
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER50User Multiplexer n

Address: 0x42000152
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER51User Multiplexer n

Address: 0x42000153
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

INTENCLRInterrupt Enable Clear

Address: 0x420001D4
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1–
0NSCHK

1 field

Field	Bits	What it does
NSCHK	0	Non-Secure Check Interrupt Enable

INTENSETInterrupt Enable Set

Address: 0x420001D5
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1–
0NSCHK

1 field

Field	Bits	What it does
NSCHK	0	Non-Secure Check Interrupt Enable

INTFLAGInterrupt Flag Status and Clear

Address: 0x420001D6
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1–
0NSCHK

1 field

Field	Bits	What it does
NSCHK	0	Non-Secure Check

NONSECCHANChannels Security Attribution

Address: 0x420001D8
Reset: 0x00000000
Access: read/write
Size: 32-bit

12 fields

Field	Bits	What it does
CHANNEL11	11	Non-Secure for Channel 11
CHANNEL10	10	Non-Secure for Channel 10
CHANNEL9	9	Non-Secure for Channel 9
CHANNEL8	8	Non-Secure for Channel 8
CHANNEL7	7	Non-Secure for Channel 7
CHANNEL6	6	Non-Secure for Channel 6
CHANNEL5	5	Non-Secure for Channel 5
CHANNEL4	4	Non-Secure for Channel 4
CHANNEL3	3	Non-Secure for Channel 3
CHANNEL2	2	Non-Secure for Channel 2
CHANNEL1	1	Non-Secure for Channel 1
CHANNEL0	0	Non-Secure for Channel 0

NSCHKCHANNon-Secure Channels Check

Address: 0x420001DC
Reset: 0x00000000
Access: read/write
Size: 32-bit

12 fields

Field	Bits	What it does
CHANNEL11	11	Channel 11 to be checked as non-secured
CHANNEL10	10	Channel 10 to be checked as non-secured
CHANNEL9	9	Channel 9 to be checked as non-secured
CHANNEL8	8	Channel 8 to be checked as non-secured
CHANNEL7	7	Channel 7 to be checked as non-secured
CHANNEL6	6	Channel 6 to be checked as non-secured
CHANNEL5	5	Channel 5 to be checked as non-secured
CHANNEL4	4	Channel 4 to be checked as non-secured
CHANNEL3	3	Channel 3 to be checked as non-secured
CHANNEL2	2	Channel 2 to be checked as non-secured
CHANNEL1	1	Channel 1 to be checked as non-secured
CHANNEL0	0	Channel 0 to be checked as non-secured

NONSECUSER0Users Security Attribution

Address: 0x420001E0
Reset: 0x00000000
Access: read/write
Size: 32-bit

32 fields

Field	Bits	What it does
USER30	30	Non-Secure for User 30
USER29	29	Non-Secure for User 29
USER28	28	Non-Secure for User 28
USER27	27	Non-Secure for User 27
USER26	26	Non-Secure for User 26
USER25	25	Non-Secure for User 25
USER24	24	Non-Secure for User 24
USER23	23	Non-Secure for User 23
USER22	22	Non-Secure for User 22
USER21	21	Non-Secure for User 21
USER20	20	Non-Secure for User 20
USER19	19	Non-Secure for User 19
USER18	18	Non-Secure for User 18
USER17	17	Non-Secure for User 17
USER16	16	Non-Secure for User 16
USER15	15	Non-Secure for User 15
USER14	14	Non-Secure for User 14
USER13	13	Non-Secure for User 13
USER12	12	Non-Secure for User 12
USER11	11	Non-Secure for User 11
USER10	10	Non-Secure for User 10
USER9	9	Non-Secure for User 9
USER8	8	Non-Secure for User 8
USER7	7	Non-Secure for User 7
USER6	6	Non-Secure for User 6
USER5	5	Non-Secure for User 5
USER4	4	Non-Secure for User 4
USER3	3	Non-Secure for User 3
USER2	2	Non-Secure for User 2
USER1	1	Non-Secure for User 1
USER0	0	Non-Secure for User 0
USER31	31	Non-Secure for User 31

NONSECUSER1Users Security Attribution

Address: 0x420001E4
Reset: 0x00000000
Access: read/write
Size: 32-bit

20 fields

Field	Bits	What it does
USER51	19	Non-Secure for User 51
USER50	18	Non-Secure for User 50
USER49	17	Non-Secure for User 49
USER48	16	Non-Secure for User 48
USER47	15	Non-Secure for User 47
USER46	14	Non-Secure for User 46
USER45	13	Non-Secure for User 45
USER44	12	Non-Secure for User 44
USER43	11	Non-Secure for User 43
USER42	10	Non-Secure for User 42
USER41	9	Non-Secure for User 41
USER40	8	Non-Secure for User 40
USER39	7	Non-Secure for User 39
USER38	6	Non-Secure for User 38
USER37	5	Non-Secure for User 37
USER36	4	Non-Secure for User 36
USER35	3	Non-Secure for User 35
USER34	2	Non-Secure for User 34
USER33	1	Non-Secure for User 33
USER32	0	Non-Secure for User 32

NSCHKUSER0Non-Secure Users Check

Address: 0x420001F0
Reset: 0x00000000
Access: read/write
Size: 32-bit

32 fields

Field	Bits	What it does
USER30	30	User 30 to be checked as non-secured
USER29	29	User 29 to be checked as non-secured
USER28	28	User 28 to be checked as non-secured
USER27	27	User 27 to be checked as non-secured
USER26	26	User 26 to be checked as non-secured
USER25	25	User 25 to be checked as non-secured
USER24	24	User 24 to be checked as non-secured
USER23	23	User 23 to be checked as non-secured
USER22	22	User 22 to be checked as non-secured
USER21	21	User 21 to be checked as non-secured
USER20	20	User 20 to be checked as non-secured
USER19	19	User 19 to be checked as non-secured
USER18	18	User 18 to be checked as non-secured
USER17	17	User 17 to be checked as non-secured
USER16	16	User 16 to be checked as non-secured
USER15	15	User 15 to be checked as non-secured
USER14	14	User 14 to be checked as non-secured
USER13	13	User 13 to be checked as non-secured
USER12	12	User 12 to be checked as non-secured
USER11	11	User 11 to be checked as non-secured
USER10	10	User 10 to be checked as non-secured
USER9	9	User 9 to be checked as non-secured
USER8	8	User 8 to be checked as non-secured
USER7	7	User 7 to be checked as non-secured
USER6	6	User 6 to be checked as non-secured
USER5	5	User 5 to be checked as non-secured
USER4	4	User 4 to be checked as non-secured
USER3	3	User 3 to be checked as non-secured
USER2	2	User 2 to be checked as non-secured
USER1	1	User 1 to be checked as non-secured
USER0	0	User 0 to be checked as non-secured
USER31	31	User 31 to be checked as non-secured

NSCHKUSER1Non-Secure Users Check

Address: 0x420001F4
Reset: 0x00000000
Access: read/write
Size: 32-bit

20 fields

Field	Bits	What it does
USER51	19	User 51 to be checked as non-secured
USER50	18	User 50 to be checked as non-secured
USER49	17	User 49 to be checked as non-secured
USER48	16	User 48 to be checked as non-secured
USER47	15	User 47 to be checked as non-secured
USER46	14	User 46 to be checked as non-secured
USER45	13	User 45 to be checked as non-secured
USER44	12	User 44 to be checked as non-secured
USER43	11	User 43 to be checked as non-secured
USER42	10	User 42 to be checked as non-secured
USER41	9	User 41 to be checked as non-secured
USER40	8	User 40 to be checked as non-secured
USER39	7	User 39 to be checked as non-secured
USER38	6	User 38 to be checked as non-secured
USER37	5	User 37 to be checked as non-secured
USER36	4	User 36 to be checked as non-secured
USER35	3	User 35 to be checked as non-secured
USER34	2	User 34 to be checked as non-secured
USER33	1	User 33 to be checked as non-secured
USER32	0	User 32 to be checked as non-secured

CTRLAControl

Address: 0x42000200
Reset: 0x00
Access: write only

7–
6–
5–
4–
3–
2–
1–
0SWRST

1 field

Field	Bits	What it does
SWRST	0	Software Reset

SWEVTSoftware Event

Address: 0x42000204
Reset: 0x00000000
Access: write only
Size: 32-bit

12 fields

Field	Bits	What it does
CHANNEL11	11	Channel 11 Software Selection
CHANNEL10	10	Channel 10 Software Selection
CHANNEL9	9	Channel 9 Software Selection
CHANNEL8	8	Channel 8 Software Selection
CHANNEL7	7	Channel 7 Software Selection
CHANNEL6	6	Channel 6 Software Selection
CHANNEL5	5	Channel 5 Software Selection
CHANNEL4	4	Channel 4 Software Selection
CHANNEL3	3	Channel 3 Software Selection
CHANNEL2	2	Channel 2 Software Selection
CHANNEL1	1	Channel 1 Software Selection
CHANNEL0	0	Channel 0 Software Selection

PRICTRLPriority Control

Address: 0x42000208
Reset: 0x00
Access: read/write

7RREN
6–
5–
4–
3–
2PRI2
1PRI1
0PRI0

2 fields

Field	Bits	What it does
RREN	7	Round-Robin Scheduling Enable
PRI	2:0	Channel Priority Number

INTPENDChannel Pending Interrupt

Address: 0x42000210
Reset: 0x4000
Access: read/write
Size: 16-bit

5 fields

Field	Bits	What it does
BUSY	15	Busy
READY	14	Ready
EVD	9	Channel Event Detected
OVR	8	Channel Overrun
ID	2:0	Channel ID

INTSTATUSInterrupt Status

Address: 0x42000214
Reset: 0x00000000
Access: read only
Size: 32-bit

8 fields

Field	Bits	What it does
CHINT7	7	Channel 7 Pending Interrupt
CHINT6	6	Channel 6 Pending Interrupt
CHINT5	5	Channel 5 Pending Interrupt
CHINT4	4	Channel 4 Pending Interrupt
CHINT3	3	Channel 3 Pending Interrupt
CHINT2	2	Channel 2 Pending Interrupt
CHINT1	1	Channel 1 Pending Interrupt
CHINT0	0	Channel 0 Pending Interrupt

BUSYCHBusy Channels

Address: 0x42000218
Reset: 0x00000000
Access: read only
Size: 32-bit

8 fields

Field	Bits	What it does
BUSYCH7	7	Busy Channel 7
BUSYCH6	6	Busy Channel 6
BUSYCH5	5	Busy Channel 5
BUSYCH4	4	Busy Channel 4
BUSYCH3	3	Busy Channel 3
BUSYCH2	2	Busy Channel 2
BUSYCH1	1	Busy Channel 1
BUSYCH0	0	Busy Channel 0

READYUSRReady Users

Address: 0x4200021C
Reset: 0xFFFFFFFF
Access: read only
Size: 32-bit

8 fields

Field	Bits	What it does
READYUSR7	7	Ready User for Channel 7
READYUSR6	6	Ready User for Channel 6
READYUSR5	5	Ready User for Channel 5
READYUSR4	4	Ready User for Channel 4
READYUSR3	3	Ready User for Channel 3
READYUSR2	2	Ready User for Channel 2
READYUSR1	1	Ready User for Channel 1
READYUSR0	0	Ready User for Channel 0

CHANNEL0.CHANNELChannel n Control

Address: 0x42000220
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL0.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000224
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL0.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000225
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL0.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000226
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL0.CHSTATUSChannel n Status

Address: 0x42000227
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL1.CHANNELChannel n Control

Address: 0x42000228
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL1.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200022C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL1.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200022D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL1.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200022E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL1.CHSTATUSChannel n Status

Address: 0x4200022F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL2.CHANNELChannel n Control

Address: 0x42000230
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL2.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000234
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL2.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000235
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL2.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000236
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL2.CHSTATUSChannel n Status

Address: 0x42000237
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL3.CHANNELChannel n Control

Address: 0x42000238
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL3.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200023C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL3.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200023D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL3.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200023E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL3.CHSTATUSChannel n Status

Address: 0x4200023F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL4.CHANNELChannel n Control

Address: 0x42000240
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL4.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000244
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL4.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000245
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL4.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000246
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL4.CHSTATUSChannel n Status

Address: 0x42000247
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL5.CHANNELChannel n Control

Address: 0x42000248
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL5.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200024C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL5.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200024D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL5.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200024E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL5.CHSTATUSChannel n Status

Address: 0x4200024F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL6.CHANNELChannel n Control

Address: 0x42000250
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL6.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000254
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL6.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000255
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL6.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000256
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL6.CHSTATUSChannel n Status

Address: 0x42000257
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL7.CHANNELChannel n Control

Address: 0x42000258
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL7.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200025C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL7.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200025D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL7.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200025E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL7.CHSTATUSChannel n Status

Address: 0x4200025F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL8.CHANNELChannel n Control

Address: 0x42000260
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL8.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000264
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL8.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000265
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL8.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000266
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL8.CHSTATUSChannel n Status

Address: 0x42000267
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL9.CHANNELChannel n Control

Address: 0x42000268
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL9.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200026C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL9.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200026D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL9.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200026E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL9.CHSTATUSChannel n Status

Address: 0x4200026F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL10.CHANNELChannel n Control

Address: 0x42000270
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL10.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x42000274
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL10.CHINTENSETChannel n Interrupt Enable Set

Address: 0x42000275
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL10.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x42000276
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL10.CHSTATUSChannel n Status

Address: 0x42000277
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

CHANNEL11.CHANNELChannel n Control

Address: 0x42000278
Reset: 0x00008000
Access: read/write
Size: 32-bit

5 fields

Field	Bits	What it does
ONDEMAND	15	Generic Clock On Demand
RUNSTDBY	14	Run in standby
EDGSEL	11:10	Edge Detection Selection `0` No event output when using the resynchronized or synchronous path `1` Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path `2` Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path `3` Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path
PATH	9:8	Path Selection `0` Synchronous path `1` Resynchronized path `2` Asynchronous path
EVGEN	6:0	Event Generator Selection

CHANNEL11.CHINTENCLRChannel n Interrupt Enable Clear

Address: 0x4200027C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Disable
OVR	0	Channel Overrun Interrupt Disable

CHANNEL11.CHINTENSETChannel n Interrupt Enable Set

Address: 0x4200027D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected Interrupt Enable
OVR	0	Channel Overrun Interrupt Enable

CHANNEL11.CHINTFLAGChannel n Interrupt Flag Status and Clear

Address: 0x4200027E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1EVD
0OVR

2 fields

Field	Bits	What it does
EVD	1	Channel Event Detected
OVR	0	Channel Overrun

CHANNEL11.CHSTATUSChannel n Status

Address: 0x4200027F
Reset: 0x01
Access: read only

7–
6–
5–
4–
3–
2–
1BUSYCH
0RDYUSR

2 fields

Field	Bits	What it does
BUSYCH	1	Busy Channel
RDYUSR	0	Ready User

USER0User Multiplexer n

Address: 0x42000320
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER1User Multiplexer n

Address: 0x42000321
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER2User Multiplexer n

Address: 0x42000322
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER3User Multiplexer n

Address: 0x42000323
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER4User Multiplexer n

Address: 0x42000324
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER5User Multiplexer n

Address: 0x42000325
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER6User Multiplexer n

Address: 0x42000326
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER7User Multiplexer n

Address: 0x42000327
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER8User Multiplexer n

Address: 0x42000328
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER9User Multiplexer n

Address: 0x42000329
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER10User Multiplexer n

Address: 0x4200032A
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER11User Multiplexer n

Address: 0x4200032B
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER12User Multiplexer n

Address: 0x4200032C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER13User Multiplexer n

Address: 0x4200032D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER14User Multiplexer n

Address: 0x4200032E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER15User Multiplexer n

Address: 0x4200032F
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER16User Multiplexer n

Address: 0x42000330
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER17User Multiplexer n

Address: 0x42000331
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER18User Multiplexer n

Address: 0x42000332
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER19User Multiplexer n

Address: 0x42000333
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER20User Multiplexer n

Address: 0x42000334
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER21User Multiplexer n

Address: 0x42000335
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER22User Multiplexer n

Address: 0x42000336
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER23User Multiplexer n

Address: 0x42000337
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER24User Multiplexer n

Address: 0x42000338
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER25User Multiplexer n

Address: 0x42000339
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER26User Multiplexer n

Address: 0x4200033A
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER27User Multiplexer n

Address: 0x4200033B
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER28User Multiplexer n

Address: 0x4200033C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER29User Multiplexer n

Address: 0x4200033D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER30User Multiplexer n

Address: 0x4200033E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER31User Multiplexer n

Address: 0x4200033F
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER32User Multiplexer n

Address: 0x42000340
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER33User Multiplexer n

Address: 0x42000341
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER34User Multiplexer n

Address: 0x42000342
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER35User Multiplexer n

Address: 0x42000343
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER36User Multiplexer n

Address: 0x42000344
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER37User Multiplexer n

Address: 0x42000345
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER38User Multiplexer n

Address: 0x42000346
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER39User Multiplexer n

Address: 0x42000347
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER40User Multiplexer n

Address: 0x42000348
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER41User Multiplexer n

Address: 0x42000349
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER42User Multiplexer n

Address: 0x4200034A
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER43User Multiplexer n

Address: 0x4200034B
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER44User Multiplexer n

Address: 0x4200034C
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER45User Multiplexer n

Address: 0x4200034D
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER46User Multiplexer n

Address: 0x4200034E
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER47User Multiplexer n

Address: 0x4200034F
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER48User Multiplexer n

Address: 0x42000350
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER49User Multiplexer n

Address: 0x42000351
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER50User Multiplexer n

Address: 0x42000352
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

USER51User Multiplexer n

Address: 0x42000353
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3CHANNEL3
2CHANNEL2
1CHANNEL1
0CHANNEL0

1 field

Field	Bits	What it does
CHANNEL	3:0	Channel Event Selection

INTENCLRInterrupt Enable Clear

Address: 0x420003D4
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1–
0NSCHK

1 field

Field	Bits	What it does
NSCHK	0	Non-Secure Check Interrupt Enable

INTENSETInterrupt Enable Set

Address: 0x420003D5
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1–
0NSCHK

1 field

Field	Bits	What it does
NSCHK	0	Non-Secure Check Interrupt Enable

INTFLAGInterrupt Flag Status and Clear

Address: 0x420003D6
Reset: 0x00
Access: read/write

7–
6–
5–
4–
3–
2–
1–
0NSCHK

1 field

Field	Bits	What it does
NSCHK	0	Non-Secure Check

NONSECCHANChannels Security Attribution

Address: 0x420003D8
Reset: 0x00000000
Access: read/write
Size: 32-bit

12 fields

Field	Bits	What it does
CHANNEL11	11	Non-Secure for Channel 11
CHANNEL10	10	Non-Secure for Channel 10
CHANNEL9	9	Non-Secure for Channel 9
CHANNEL8	8	Non-Secure for Channel 8
CHANNEL7	7	Non-Secure for Channel 7
CHANNEL6	6	Non-Secure for Channel 6
CHANNEL5	5	Non-Secure for Channel 5
CHANNEL4	4	Non-Secure for Channel 4
CHANNEL3	3	Non-Secure for Channel 3
CHANNEL2	2	Non-Secure for Channel 2
CHANNEL1	1	Non-Secure for Channel 1
CHANNEL0	0	Non-Secure for Channel 0

NSCHKCHANNon-Secure Channels Check

Address: 0x420003DC
Reset: 0x00000000
Access: read/write
Size: 32-bit

12 fields

Field	Bits	What it does
CHANNEL11	11	Channel 11 to be checked as non-secured
CHANNEL10	10	Channel 10 to be checked as non-secured
CHANNEL9	9	Channel 9 to be checked as non-secured
CHANNEL8	8	Channel 8 to be checked as non-secured
CHANNEL7	7	Channel 7 to be checked as non-secured
CHANNEL6	6	Channel 6 to be checked as non-secured
CHANNEL5	5	Channel 5 to be checked as non-secured
CHANNEL4	4	Channel 4 to be checked as non-secured
CHANNEL3	3	Channel 3 to be checked as non-secured
CHANNEL2	2	Channel 2 to be checked as non-secured
CHANNEL1	1	Channel 1 to be checked as non-secured
CHANNEL0	0	Channel 0 to be checked as non-secured

NONSECUSER0Users Security Attribution

Address: 0x420003E0
Reset: 0x00000000
Access: read/write
Size: 32-bit

32 fields

Field	Bits	What it does
USER30	30	Non-Secure for User 30
USER29	29	Non-Secure for User 29
USER28	28	Non-Secure for User 28
USER27	27	Non-Secure for User 27
USER26	26	Non-Secure for User 26
USER25	25	Non-Secure for User 25
USER24	24	Non-Secure for User 24
USER23	23	Non-Secure for User 23
USER22	22	Non-Secure for User 22
USER21	21	Non-Secure for User 21
USER20	20	Non-Secure for User 20
USER19	19	Non-Secure for User 19
USER18	18	Non-Secure for User 18
USER17	17	Non-Secure for User 17
USER16	16	Non-Secure for User 16
USER15	15	Non-Secure for User 15
USER14	14	Non-Secure for User 14
USER13	13	Non-Secure for User 13
USER12	12	Non-Secure for User 12
USER11	11	Non-Secure for User 11
USER10	10	Non-Secure for User 10
USER9	9	Non-Secure for User 9
USER8	8	Non-Secure for User 8
USER7	7	Non-Secure for User 7
USER6	6	Non-Secure for User 6
USER5	5	Non-Secure for User 5
USER4	4	Non-Secure for User 4
USER3	3	Non-Secure for User 3
USER2	2	Non-Secure for User 2
USER1	1	Non-Secure for User 1
USER0	0	Non-Secure for User 0
USER31	31	Non-Secure for User 31

NONSECUSER1Users Security Attribution

Address: 0x420003E4
Reset: 0x00000000
Access: read/write
Size: 32-bit

20 fields

Field	Bits	What it does
USER51	19	Non-Secure for User 51
USER50	18	Non-Secure for User 50
USER49	17	Non-Secure for User 49
USER48	16	Non-Secure for User 48
USER47	15	Non-Secure for User 47
USER46	14	Non-Secure for User 46
USER45	13	Non-Secure for User 45
USER44	12	Non-Secure for User 44
USER43	11	Non-Secure for User 43
USER42	10	Non-Secure for User 42
USER41	9	Non-Secure for User 41
USER40	8	Non-Secure for User 40
USER39	7	Non-Secure for User 39
USER38	6	Non-Secure for User 38
USER37	5	Non-Secure for User 37
USER36	4	Non-Secure for User 36
USER35	3	Non-Secure for User 35
USER34	2	Non-Secure for User 34
USER33	1	Non-Secure for User 33
USER32	0	Non-Secure for User 32

NSCHKUSER0Non-Secure Users Check

Address: 0x420003F0
Reset: 0x00000000
Access: read/write
Size: 32-bit

32 fields

Field	Bits	What it does
USER30	30	User 30 to be checked as non-secured
USER29	29	User 29 to be checked as non-secured
USER28	28	User 28 to be checked as non-secured
USER27	27	User 27 to be checked as non-secured
USER26	26	User 26 to be checked as non-secured
USER25	25	User 25 to be checked as non-secured
USER24	24	User 24 to be checked as non-secured
USER23	23	User 23 to be checked as non-secured
USER22	22	User 22 to be checked as non-secured
USER21	21	User 21 to be checked as non-secured
USER20	20	User 20 to be checked as non-secured
USER19	19	User 19 to be checked as non-secured
USER18	18	User 18 to be checked as non-secured
USER17	17	User 17 to be checked as non-secured
USER16	16	User 16 to be checked as non-secured
USER15	15	User 15 to be checked as non-secured
USER14	14	User 14 to be checked as non-secured
USER13	13	User 13 to be checked as non-secured
USER12	12	User 12 to be checked as non-secured
USER11	11	User 11 to be checked as non-secured
USER10	10	User 10 to be checked as non-secured
USER9	9	User 9 to be checked as non-secured
USER8	8	User 8 to be checked as non-secured
USER7	7	User 7 to be checked as non-secured
USER6	6	User 6 to be checked as non-secured
USER5	5	User 5 to be checked as non-secured
USER4	4	User 4 to be checked as non-secured
USER3	3	User 3 to be checked as non-secured
USER2	2	User 2 to be checked as non-secured
USER1	1	User 1 to be checked as non-secured
USER0	0	User 0 to be checked as non-secured
USER31	31	User 31 to be checked as non-secured

NSCHKUSER1Non-Secure Users Check

Address: 0x420003F4
Reset: 0x00000000
Access: read/write
Size: 32-bit

20 fields

Field	Bits	What it does
USER51	19	User 51 to be checked as non-secured
USER50	18	User 50 to be checked as non-secured
USER49	17	User 49 to be checked as non-secured
USER48	16	User 48 to be checked as non-secured
USER47	15	User 47 to be checked as non-secured
USER46	14	User 46 to be checked as non-secured
USER45	13	User 45 to be checked as non-secured
USER44	12	User 44 to be checked as non-secured
USER43	11	User 43 to be checked as non-secured
USER42	10	User 42 to be checked as non-secured
USER41	9	User 41 to be checked as non-secured
USER40	8	User 40 to be checked as non-secured
USER39	7	User 39 to be checked as non-secured
USER38	6	User 38 to be checked as non-secured
USER37	5	User 37 to be checked as non-secured
USER36	4	User 36 to be checked as non-secured
USER35	3	User 35 to be checked as non-secured
USER34	2	User 34 to be checked as non-secured
USER33	1	User 33 to be checked as non-secured
USER32	0	User 32 to be checked as non-secured

EVSYS Event System Interface