PIC32CX5109BZ31032_SL3 CCL registers

The 4 registers of CCL (Configurable Custom Logic), from 0x42001800, with their reset value and every field. The PIC32CX5109BZ31032_SL3 has 2134 registers in 59 peripherals, one page each.

CCL Configurable Custom Logic

CTRLControl

Address
0x42001800
Reset
0x00
Access
read/write
  1. 7–
  2. 6RUNSTDBY
  3. 5–
  4. 4–
  5. 3–
  6. 2–
  7. 1ENABLE
  8. 0SWRST
3 fields
FieldBitsWhat it does
RUNSTDBY6Run in Standby
  • 0 Generic clock is not required in standby sleep mode
  • 1 Generic clock is required in standby sleep mode
ENABLE1Enable
  • 0 The peripheral is disabled
  • 1 The peripheral is enabled
SWRST0Software Reset
  • 0 The peripheral is not reset
  • 1 The peripheral is reset

SEQCTRLSEQ Control x

Address
0x42001804
Reset
0x00
Access
read/write
  1. 7–
  2. 6–
  3. 5–
  4. 4–
  5. 3SEQSEL3
  6. 2SEQSEL2
  7. 1SEQSEL1
  8. 0SEQSEL0
1 field
FieldBitsWhat it does
SEQSEL3:0Sequential Selection
  • 0 Sequential logic is disabled
  • 1 D flip flop
  • 2 JK flip flop
  • 3 D latch
  • 4 RS latch

LUTCTRL0LUT Control x

Address
0x42001808
Reset
0x00000000
Access
read/write
Size
32-bit
10 fields
FieldBitsWhat it does
LUTEO22LUT Event Output Enable
  • 0 LUT event output is disabled
  • 1 LUT event output is enabled
LUTEI21LUT Event Input Enable
  • 0 LUT incoming event is disabled
  • 1 LUT incoming event is enabled
INVEI20Inverted Event Input Enable
  • 0 Incoming event is not inverted
  • 1 Incoming event is inverted
INSEL219:16Input Selection 2
  • 0 Masked input
  • 1 Feedback input source
  • 2 Linked LUT input source
  • 3 Event input source
  • 4 I/O pin input source
  • 5 AC input source
  • 6 TC input source
  • 7 Alternate TC input source
  • 8 TCC input source
  • 9 SERCOM input source
  • 10 Alternate2 TC input source
  • 11 Asynchronous event input source
INSEL115:12Input Selection 1
  • 0 Masked input
  • 1 Feedback input source
  • 2 Linked LUT input source
  • 3 Event input source
  • 4 I/O pin input source
  • 5 AC input source
  • 6 TC input source
  • 7 Alternate TC input source
  • 8 TCC input source
  • 9 SERCOM input source
  • 10 Alternate2 TC input source
  • 11 Asynchronous event input source
INSEL011:8Input Selection 0
  • 0 Masked input
  • 1 Feedback input source
  • 2 Linked LUT input source
  • 3 Event input source
  • 4 I/O pin input source
  • 5 AC input source
  • 6 TC input source
  • 7 Alternate TC input source
  • 8 TCC input source
  • 9 SERCOM input source
  • 10 Alternate2 TC input source
  • 11 Asynchronous event input source
EDGESEL7Edge Selection
  • 0 Edge detector is disabled
  • 1 Edge detector is enabled
FILTSEL5:4Filter Selection
  • 0 Filter disabled
  • 1 Synchronizer enabled
  • 2 Filter enabled
ENABLE1LUT Enable
  • 0 LUT block is disabled
  • 1 LUT block is enabled
TRUTH31:24Truth Value

LUTCTRL1LUT Control x

Address
0x4200180C
Reset
0x00000000
Access
read/write
Size
32-bit
10 fields
FieldBitsWhat it does
LUTEO22LUT Event Output Enable
  • 0 LUT event output is disabled
  • 1 LUT event output is enabled
LUTEI21LUT Event Input Enable
  • 0 LUT incoming event is disabled
  • 1 LUT incoming event is enabled
INVEI20Inverted Event Input Enable
  • 0 Incoming event is not inverted
  • 1 Incoming event is inverted
INSEL219:16Input Selection 2
  • 0 Masked input
  • 1 Feedback input source
  • 2 Linked LUT input source
  • 3 Event input source
  • 4 I/O pin input source
  • 5 AC input source
  • 6 TC input source
  • 7 Alternate TC input source
  • 8 TCC input source
  • 9 SERCOM input source
  • 10 Alternate2 TC input source
  • 11 Asynchronous event input source
INSEL115:12Input Selection 1
  • 0 Masked input
  • 1 Feedback input source
  • 2 Linked LUT input source
  • 3 Event input source
  • 4 I/O pin input source
  • 5 AC input source
  • 6 TC input source
  • 7 Alternate TC input source
  • 8 TCC input source
  • 9 SERCOM input source
  • 10 Alternate2 TC input source
  • 11 Asynchronous event input source
INSEL011:8Input Selection 0
  • 0 Masked input
  • 1 Feedback input source
  • 2 Linked LUT input source
  • 3 Event input source
  • 4 I/O pin input source
  • 5 AC input source
  • 6 TC input source
  • 7 Alternate TC input source
  • 8 TCC input source
  • 9 SERCOM input source
  • 10 Alternate2 TC input source
  • 11 Asynchronous event input source
EDGESEL7Edge Selection
  • 0 Edge detector is disabled
  • 1 Edge detector is enabled
FILTSEL5:4Filter Selection
  • 0 Filter disabled
  • 1 Synchronizer enabled
  • 2 Filter enabled
ENABLE1LUT Enable
  • 0 LUT block is disabled
  • 1 LUT block is enabled
TRUTH31:24Truth Value