The 1 register of HLVD (High/low-voltage detect), from 0xBF801800, with their reset value and every field. The PIC32MK0512GPK064 has 1153 registers in 106 peripherals, one page each.
Most PIC32 SFRs have three more registers right after them: CLR at +4, SET at +8 and INV at +C (T1CONCLR, T1CONSET, T1CONINV), which clear, set or flip just the bits written as 1, in one write.
HLVD High/low-voltage detect
HLVDCONHigh/Low-Voltage Detect Control Register
Address
0xBF801800
Reset
0x00000000
Access
read/write
Size
32-bit
6 fields
Field
Bits
What it does
ON
15
HLVD Module Enable bit
0 HLVD module is disabled
1 HLVD module is enabled
SIDL
13
Stop in Idle Mode bit
0 Continue operation of LVD in Idle mode
1 Discontinue operation of LVD when device enters Idle mode
VDIR
11
Voltage Change Direction Select bit
0 Event occurs when voltage equals or falls below the trip point (HLVDL)
1 Event occurs when voltage equals or exceeds the trip point (HLVDL)
BGVST
10
Band Gap Reference Voltages Stable Status bit
0 Indicates internal band gap voltage reference is not stable
1 Indicates internal band gap voltage references is stable
BETA