PIC32MK1024MCF064 TMR8 registers

The 3 registers of TMR8 (Timer 8), from 0xBF820E00, with their reset value and every field. The PIC32MK1024MCF064 has 1848 registers in 120 peripherals, one page each.

Most PIC32 SFRs have three more registers right after them: CLR at +4, SET at +8 and INV at +C (T1CONCLR, T1CONSET, T1CONINV), which clear, set or flip just the bits written as 1, in one write.

TMR8 Timer 8

T8CONTimer Configuration

Address
0xBF820E00
Reset
0x00000000
Access
read/write
Size
32-bit
7 fields
FieldBitsWhat it does
ON15Timer On bit
  • 0 Module is disabled
  • 1 Module is enabled
SIDL13Stop in Idle Mode bit
  • 0 Continue operation even in Idle mode
  • 1 Discontinue operation when device enters Idle mode
SYNC8Synchronized Timer Start/Stop Enable bit
  • 0 Synchronized timer Start/Stop is disabled
  • 1 Synchronized timer Start/Stop is enabled
TGATE7Timer Gated Time Accumulation Enable bit
  • 0 Gated time accumulation is disabled
  • 1 Gated time accumulation is enabled
TCKPS6:4Timer Input Clock Prescale Select bits
  • 0 1:1 prescale value
  • 1 1:2 prescale value
  • 2 1:4 prescale value
  • 3 1:8 prescale value
  • 4 1:16 prescale value
  • 5 1:32 prescale value
  • 6 1:64 prescale value
  • 7 1:256 prescale value
T32332-Bit Timer Mode Select bit
  • 0 16-bit Timer mode
  • 1 32-bit Timer mode
TCS1Timer Clock Source Select bit
  • 0 Internal peripheral clock
  • 1 External clock from TxCK pin

TMR8Timer

Address
0xBF820E10
Reset
0x00000000
Access
read/write
Size
32-bit

PR8Timer Period

Address
0xBF820E20
Reset
0xFFFFFFFF
Access
read/write
Size
32-bit