PIC32MX534F064H OC3 registers

The 3 registers of OC3 (Output compare 3), from 0xBF803400, with their reset value and every field. The PIC32MX534F064H has 506 registers in 58 peripherals, one page each.

Most PIC32 SFRs have three more registers right after them: CLR at +4, SET at +8 and INV at +C (T1CONCLR, T1CONSET, T1CONINV), which clear, set or flip just the bits written as 1, in one write.

OC3 Output compare 3

OC3CONOutput Compare 'x' Control Register

Address
0xBF803400
Reset
0x00000000
Access
read/write
Size
32-bit
6 fields
FieldBitsWhat it does
ON15Output Compare Peripheral On bit
  • 0 Output Compare peripheral is disabled
  • 1 Output Compare peripheral is enabled
SIDL13Stop in Idle Mode bit
  • 0 Continue operation in Idle mode
  • 1 Discontinue operation when CPU enters Idle mode
OC32532-bit Compare Mode bit
  • 0 OCxR(15-0) and OCxRS(15-0) are used for comparisons to the 16-bit timer source
  • 1 OCxR(31-0) and/or OCxRS(31-0) are used for comparisions to the 32-bit timer source
OCFLT4PWM Fault Condition Status bit
  • 0 No PWM Fault condition has occurred
  • 1 PWM Fault condition has occurred (cleared in HW only)
OCTSEL3Output Compare Timer Select bit
  • 0 Timer2 is the clock source for this Output Compare module
  • 1 Timer3 is the clock source for this Output Compare module
OCM2:0Output Compare Mode Select bits
  • 0 Output compare peripheral is disabled but continues to draw current
  • 1 Initialize OCx pin low; compare event forces OCx pin high
  • 2 Initialize OCx pin high; compare event forces OCx pin low
  • 3 Compare event toggles OCx pin
  • 4 Initialize OCx pin low: generate single output pulse on OCx pin
  • 5 Initialize OCx pin low; generate continious output pulses on OCx pin
  • 6 PWM mode on OCx; Fault pin disabled
  • 7 PWM mode on OCx; Fault pin enabled

OC3R

Address
0xBF803410
Reset
0x00000000
Access
read/write
Size
32-bit

OC3RS

Address
0xBF803420
Reset
0x00000000
Access
read/write
Size
32-bit