Hi Folks! I hope you’re well today. I welcome you on board. Happy to see you around. In this post today, I’ll walk you through the Introduction to LF353N.
The LM393N is a wide bandwidth and high input impedance Dual Input JEFET op-amp that is widely used in high-speed integrators and low noise circuits. The low bias current and input noise make it a good pick for audio amplifier applications. It carries a high slew rate (13V/uS) and wide bandwidth around (4MHz).
I suggest you read this post all the way through, as I’ll detail the complete introduction to LF353N covering datasheet, pinout, features, and applications. Let’s dive in.
Pin Description of LF353N | ||||
---|---|---|---|---|
Pin No. | Pin Description | Pin Name | ||
1 | The output of Op-Amp 1 | OUT (A) | ||
2 | Inverting Input of Op-Amp 1 | INPUT- A(-) | ||
3 | Non-Inverting Input of Op-Amp 1 | INPUT- A(+) | ||
4 | Ground or Negative supply terminal | Power (-Vs) | ||
5 | Non-Inverting Input of Op-Amp 2 | INPUT- B(+) | ||
6 | Inverting Input of Op-Amp 2 | INPUT- B(-) | ||
7 | The output of Op-Amp 2 | OUTPUT B | ||
8 | Positive supply terminal | +Vcc |
While working with the alternatives, make sure you cross-check the pinout of them. It’s quite likely the pinout of the alternatives might differ from the pinout of LF353N.
The LF353N is used in the following applications.
That’s all for today. I hope you’ve loved reading this article. If you have any questions, you can approach me in the section below, I’d reply to you according to the best of my experience. Feel free to share your valuable suggestions and feedback around the content we share, so we keep producing quality content customized to your needs and requirements. Thank you for reading this article.
JLCPCB – Prototype 10 PCBs for $2 (For Any Color)
China’s Largest PCB Prototype Enterprise, 600,000+ Customers & 10,000+ Online Orders Daily
How to Get PCB Cash Coupon from JLCPCB: https://bit.ly/2GMCH9w