Hi Guys! Hope you’re well today. I welcome you on board. In this post today, I’ll walk you through the Introduction to TDA1554.
The TDA1554Q is an integrated class-B output amplifier mainly used for car radio applications. This device features 4 x 11 W single-ended or 2 x 22 W bridge amplifiers. It comes in a 17-lead single-in-line (SIL) plastic power package.
I suggest you buckle up and read this entire post till the end as I’ll discuss the complete Introduction to TDA1554 covering datasheet, pinout, features, and applications. Let’s get started.
Pin Description of TDA1554 | ||||
---|---|---|---|---|
Pin No. | Pin Description | Pin Name | ||
1 | Non-inverting input 1 | NINV1 | ||
2 | Inverting input 1 | INV1 | ||
3 | Ground (signal) | GND | ||
4 | Supply voltage ripple rejection | RR | ||
5 | Positive Input Voltage 1 | VP1 | ||
6 | Output 1 | OUT1 | ||
7 | Power Ground 1 | GND1 | ||
8 | Output 2 | OUT2 | ||
9 | Not connected | NC | ||
10 | Output 3 | OUT3 | ||
11 | Power Ground 2 | GND2 | ||
12 | Output 4 | OUT4 | ||
13 | Positive Input voltage 2 | VP2 | ||
14 | Mute/Stand-by switch | M/SS | ||
15 | Not connected | NC | ||
16 | Inverting input 2 | INV2 | ||
17 | Non-inverting input 2 | NINV2 |
This component is mainly designed for car radio applications.
That’s for today. I hope you’ve enjoyed reading this article. If you have any questions, you can approach me in the section below. I’d love to help you according to the best of my expertise. Feel free to share your valuable feedback and suggestions around the content we share so we keep producing quality content tailored to your exact needs and requirements. Thank you for reading the article.
JLCPCB – Prototype 10 PCBs for $2 (For Any Color)
China’s Largest PCB Prototype Enterprise, 600,000+ Customers & 10,000+ Online Orders Daily
How to Get PCB Cash Coupon from JLCPCB: https://bit.ly/2GMCH9w