The Engineering Projects

Introduction to 74HC14

Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at detailed Introduction to 74HC14. 74HC14 is a member of 74XXXX integrated circuit series, it consists of logic gates. This module is also called HEX Inverting Schmitt Trigger. It is available in six independent Schmitt trigger input inverters with standard push-pull outputs. The boolean function performed by this logic gates is Y=A. It is a 14 pin module which is available in various packages. The 74HC14 works on the voltage range of 2.0V to 6.0V. This is a higher speed CMOS Schmitt Inverter mounted with a silicon gate C2MOS technology. In today's post, we will have a look at its pinout, construction, specifications, applications, working, etc. I will also share some links where I have interfaced with other microcontrollers. If you have any question about it ask in comments I will resolve your problems. So let's get started with Introduction to 74HC14.

Introduction to 74HC14

• 74HC14 is a member of 74XXXX integrated circuit series, it consists of logic gates. This module is also called HEX inverting Schmitt trigger.
• It is a high-speed CMOS Schmitt Inverter which consists of C2MOS technology. It provided high-speed operation like LSTTL, by using low power.

• Its pin configurations are the same as the 74HC04D, but the inputs have 25% Vcc hysteresis.
• Due to its Schmitt trigger function, it is used as a line receiver which will receive slow input signals.
• Its all inputs are equipped with protection circuits for static discharge or fleeting voltage.

Now, we discuss its pinout with a detailed description.

74HC14 Pinout & Description

• These are the main pinout of 74HC14, which are described below. For further information, let's discuss them one by one.

Pin#	Type	Parameters
Pin#1	1A	It is an input of gate 1.
Pin#3	2A	It is an input of gate 2.
Pin#5	3A	It is an input of gate 3.
Pin#9	4A	It is an input of gate 4.
Pin#11	5A	-It is an input of gate 5.
Pin#13	6A	It is an input of gate 6.
Pin#7	GND	It is connected to ground.
Pin#14	Vcc	It is connected to a positive voltage to provide power to all six gates.
Pin#2	1Y	It is an output of gate 1
Pin#4	2Y	It is an output of gate 2
Pin#6	3Y	It is an output of gate 3
Pin#8	4Y	It is an output of gate 4
Pin#10	5Y	It is an output of gate 5
Pin#12	6Y	It is an output of gate 6

For better understanding lets see pinout diagram. Now, we have a look at the specifications of 74HC14.

Features of 74HC14

• These are the main features of 74HC14, which are described below.
  • Its operating voltage is -0.5V to +7.0V.
  • The maximum current allowed to daw through each gate is 25mA.
  • Maximum total current can pass through Vcc or GND pins are 50mA.
  • This device is lead-free.
  • This module has a TTL type outputs.
  • It has noise immunity.
  • It maximum ESD is 2kv.
  • Its typical rise time is 85-625ns (depending on supply voltage)
  • Its typically fall time is 85-625ns (depending on supply voltage).
  • It's working temperature is  -55°C  to 125 °C.
  • It's working voltage range is 2.0 to 6.0 V.
  • Its output drive capability is 10 LSTTL Loads.
  • It has the ability to directly interface to CMOS, NMOS, and TTL.
  • This module is compatible with the JEDEC standard No.7A requirements.
  • Its chips consist of 60 FETs or equivalent gates.

Now we discuss its works, with a detailed description.

Working of 74HC14

• As mentioned earlier, there are 6 Schmitt Trigger Gates (inverted) in 74HC14, and we can used each of these gates separately.
• The internal circuit of 74HC14 is shown in the given diagram.
• For our knowledge how single gate works let's take one gate and connect it with power supply and analog signal at the input.
• We can see in the given diagram,  the sinusoidal signal is given at the input and we receiving  (Vout) as an output. The input, output graph is shown in the above diagram.
• The working principle of Schmitt trigger is very simple, the inverting Schmitt trigger's output is low only when input voltage values cross the threshold voltage (+Vt).
• We can see in the given diagram that the value of input voltage (Vin) is below the threshold voltage (Vt+), an output voltage is high. The value of the input voltage closer the value of the threshold voltage, the value of the output voltage shows low-value state.
• The value of output voltage remains low until the input voltage value is low to the threshold voltage. After this cycle continues.
• We can observe form diagram that the sinusoidal signal is our input and square wave is output. We can use every gate to get the output according to our requirements.

Switching Time of 74HC14

• Now, discuss switching time of 74HC14, in which we see how much time it take for switching.
• Every gate in 74HC14 takes some time to show output according to applied input. This delay of time is called switching time. For better understanding lets see switching diagram of 74HC14.
• There are two types of delays which occurs during switching. Which are Rise time (t_PHL) and Fall time (t_PLH).
• In a given diagram we can see that VoH becomes low when input reaches a threshold voltage and VoH becomes higher when the input voltage lower than the threshold voltage.
• We can observe from a graph that there is a delay between input as it is going high and Voh going low. This time delay is called Rise time (t_PHL ). The value of rising time (t_PHL ) is 95ns.
• We can also see from a picture that there is a time delay between logic input as it is going low and VoH is going high at the output. This time delay is called Fall time (t_PLH ).
• All these delays occur at higher frequencies, if frequencies are below given frequencies, then there will be some major errors.

 

Applications of 74HC14

• These are some applications of 74HC14.
  • It is the general purpose logic.
  • It is used in PCs and notebooks.
  • It is used in TV, DVD, Set Top Box.
  • It is used for Networking.
  • It is also used in Digital systems.

So, friends that were all about 74HC14, if you have any question about it please ask in comments I will resolve your queries. Thanks for reading. Take care until the next tutorial...

Buy Nomos Glashutte Orion watches – an excellent choice for your hands

You can find out many designs of trendy watches that are manufactured by Nomos Glashutte and they are best manufacturer of watches. Due to the very latest designs and choices of options, this brand has become very famous in a short period of time. These watches have exciting features and everyone who wears it will have an amazing experience but they are not that much costly to buy. Among the watches of Glashutte, Nomos Orion is very famous and it has excellent designs and good looking colors. Many people are very fond of buying these watches because of its stunning look and exotic designs. The styles of it may be less but the ways they are made are so perfect and that is the reason why it is preferred as the best model in Nomos Glashutte.

All about Nomos Orion

If you are looking for a watch that would suit all kinds of dresses, then the Orion watches will be the best choice. The best part about these watches is that the classic design and different shapes. It will not be suitable for sports or tool watches and the watches are modern and has lens shaped casing. Usually dress watches will be gold plated and few will have white dial with Roman numerals. But the Nomos Orion watches will have a stainless steel body and it does not have any numerals. Instead of this it has index lines and it is much suitable for a dress watch.

Right size and dial for Orion dress watch

The Nomos watches come in two sizes as 35mm and 38mm. The size which is less will be more suited for vintage style and the greater size will be more of modern style and it would suit best for men. If one wishes a vintage style of watches as an alternative for modern watches, then Orion watches are the best choice. Usually the Nomos has silver plated dial that comes in two versions. One type of watch is silver plated with indexes polished with diamond and the other with gold plated and blue tempered polish.

Important facts about Nomos Glashutte

• For limited time

The Nomos brands are produced in limited numbers that can be found in specific shops or countries. This will have certain color or dial and has unique designs with branded designs. You can check out the designs that are available online.

• Doctors without borders

Nomos has collaboration with Doctors without Borders in Germany and create limited edition watches that are helpful in creating funds for aiding purposes. Before this the Nomos were made to undergo certain inspections to check whether they meet all the guidelines.

• Design works are made in Glashutte

Usually the brands are designed in Berlin but the main office for Nomos is in the town of Glashutte. In the main office all the administrative works takes place and it is in the Glashutte station.

• In-house movements

Nomos is famous for producing in-house movements and they have many innovative inventions. You can buy the Nomos Orion watches that are of best quality and can bring a grandeur look to suit your outfits.