1N5822 Schottky Diode Pinout, Specifications, and Datasheet

Hello Guys! Hope you’re well today. Happy to see you around. I welcome you on board. In this post today, I’ll detail the Introduction to 1n5822. The 1n5822 is a Schottky diode that comes with a low forward drop voltage around 0.525V which means it needs 0.525 voltage to conduct the current in forward biased direction. It supports a load under 3A and is an ideal pick for switching applications with low current ratings. And the 40V is the maximum repetitive peak reverse voltage Vrrm of this tiny device. Just bear with me for just 2-min as I’ll be discussing the datasheet, Pinout, specifications, and applications of this tiny little device. Let’s get started.

Introduction to 1n5822

  • 1n5822 is a Schottky diode, also known as a hot-carrier diode, mainly used in fast-clamp diode switching applications. It is made up of semiconductor material and carries low forward drop voltage.
  • The small voltage drop occurs across the diode terminals when current flows through the diode.
  • Though both normal diode and Schottky require 2V DC source to power these components, the Schottky diode utilizes 0.3V out of 2V, leaving only 1.7V to power the diode while the normal diode uses 0.7V out of a 2V DC source, leaving 1.3V to power the diode.
  • Schottky diode is also called hot-carrier diode because electrons carry low energy when they are present on the semiconductor material in an unbiased condition.
  • This results in the formation of a barrier through which electrons cannot flow, the reason it’s also called the Schottky Barrier diode or hot carrier diode.

1n5822 Schottky Diode Construction

  • The 1n5822 Schottky diode is constructed by the combination of semiconductor material with metal, forming a barrier.
  • The metals used in this case are tungsten, chromium, platinum, molybdenum, and silicides.
  • And the n-type silicon is the commonly used semiconductor material. The resulting diode carries a very low forward voltage drop and is capable of very fast switching.
  • The metal used behaves as an anode or positive side of the diode and n-type semiconductor (with a colored band) is used as a cathode or negative side of the diode. In this case, the conventional current will flow from the anode metal side to the cathode semiconductor side.
  • The forward voltage of the diode depends on the nature of the metal and semiconductor you pick for the formation of that diode.
  • Though both n-type and p-type semiconductors are used to form a Schottky diode, the p-type semiconductors result in very low forward voltage compared to n-type semiconductors, the reason p-type semiconductors are rarely used to form the Schottky diodes.
  • In Schottky diodes less energy is wasted as heat as they possess low forward voltage drop, making them an ideal pick for the applications that are sensitive to efficiency.
  • Plus, they are also used in photovoltaic systems to keep the batteries from discharging in solar panels at night.
  • A control circuit or MOSFET can replace Schottky diodes in cases where less power dissipation is needed.

1n5822 Datasheet

Before you embed this component into your project, it’s always wise to weed through the datasheet of the device that gives the main characteristics of the device. Click below and download the datasheet of 1n5822.

1n5822 Pinout

1n5822 comes with two pins named anode and cathode. The colored band is a cathode and the other side is an anode. The following figure shows the pinout diagram of 1n5822. It is important to note that, the current always enters through an anode that is positive, and it leaves through a cathode that is negative in polarity.

1n5822 Features

  • Carries high efficiency and low power loss.
  • Conduction is carried out through majority carriers.
  • Protection against overvoltage.
  • Comes with low forward drop out voltage.
  • Capable of fast switching.
  • Available in package DO-201AD

1N5822 Applications

  • Used in low voltage & high-frequency inverters
  • Incorporated in freewheeling and DC/DC converters
  • Used to detect signals and polarity protection applications
  • Employed in logic circuits and radio frequency applications
  • Used in switching applications
  • Incorporated in sample-and-hold circuits
  • Employed to control the electronic charge
  • Incorporated in stand-alone photovoltaic systems
That’s all for today. I hope you find this read useful. If you have any question, you can pop your comment in the section below, I’ll answer your query according to the best of my expertise. You are most welcome to share your feedback and suggestions, they help us generate quality content. Thank you for reading the article.
Syed Zain Nasir

I am Syed Zain Nasir, the founder of <a href=https://www.TheEngineeringProjects.com/>The Engineering Projects</a> (TEP). I am a programmer since 2009 before that I just search things, make small projects and now I am sharing my knowledge through this platform.I also work as a freelancer and did many projects related to programming and electrical circuitry. <a href=https://plus.google.com/+SyedZainNasir/>My Google Profile+</a>

Share
Published by
Syed Zain Nasir