TL082 Op-Amp Datasheet, Pinout, Feature & Applications

Hello Guys! I hope you’re well today. Happy to see you around. Thank you for clicking this read. In this post today, I’ll walk you through the Introduction to TL082.

The TL082 is a wide bandwidth dual JFET input operational amplifier. High speed, low cost this device comes with internally trimmed offset voltage. It is available with a fast slew rate, a large gain bandwidth, and a low supply current.

I suggest you buckle up as I’ll discuss the complete Introduction to TL082 covering datasheet, pinout, features, and applications. Let’s get started:

Introduction to TL082

  • The TL082 is a high-speed, low-cost, wide bandwidth and dual JFET input operational amplifier.
  • This component is available with an internally trimmed offset voltage. It comes with a fast slew rate and low supply current.
  • This JFET input device extends low offset and input bias current.
  • The TL082 is electrically compatible with LM1558 and is used to enhance the overall performance of the LM1558 device.
  • With high input impedance and low total harmonic distortion, this device features low noise and offset voltage drift.
  • This amplifier is widely used in audio pre-amplification, sample and hold amplifiers, peak detectors and active filters.

TL082 Datasheet

Before you apply this device to your electrical project, it is better to scan through the datasheet of the device that details the main characteristics of the component. You can download the datasheet of TL082 by clicking the link below.

TL082 Pinout

This device comes with 8 pins as described below.

Absolute Maximum Rating of TL082
Pin No. Rating Symbol
1 Output of op-amp A Output A
2 Inverting Input A Input A
3 Non-inverting Input A Input A
4 Ground V-
5 Inverting Input B Input B
6 Non-inverting Input B Input B
7 Output of op-amp B Output B
8 Voltage supply V+

The following figure shows the pinout diagram of TL082.

Pin 4 is a negative voltage supply or ground while pin 8 is a positive voltage supply.

TL082 Features

The main features of TL082 are mentioned below which will help you understand how this device is different from other operational amplifiers available in the market.

  • Carries Low input bias current = 50 pA
  • Available with Low input noise current = 0.01 pA/Hz
  • Comes with Fast settling time to 0.01% = 2us
  • Contains internally trimmed offset voltage = 15 mV
  • Carries Low input noise voltage = 16nV/vHz
  • Exhibits Low supply current = 3.6 mA
  • Features Low 1/f noise corner = 50 Hz
  • Comes with Wide gain bandwidth = 4 MHz
  • Features High input impedance = 1012?
  • Exhibits High slew rate = 13 V/µs
  • Comes with Low total harmonic distortion = =0.02%

TL082 Applications

TL082 is used in the following applications.

  • Used in function generators and comparators.
  • Used in amplifier circuits.
  • Used in high-speed integrators.
  • Used in other electrical circuits with low input offset voltage.
  • Used in a circuit requiring high input impedance.
  • Used in audio pre-amplification.
  • Used in a sample and hold amplifiers.
  • Used in peak detectors and active filters.

That’s all for today. I hope you find this read useful. If you’re unsure or have any questions, you can pop your comment in the section below, I’d love to help you the best way I can. You’re most welcome to share your valuable suggestions and feedback about the content we share so we keep sharing quality content customized to your exact needs and requirements. Thank you for reading the post.

Syed Zain Nasir

I am Syed Zain Nasir, the founder of <a href=https://www.TheEngineeringProjects.com/>The Engineering Projects</a> (TEP). I am a programmer since 2009 before that I just search things, make small projects and now I am sharing my knowledge through this platform.I also work as a freelancer and did many projects related to programming and electrical circuitry. <a href=https://plus.google.com/+SyedZainNasir/>My Google Profile+</a>

Share
Published by
Syed Zain Nasir