ATA5783 fuses & lock bits
The fuse bytes set the clock, start-up, brown-out and boot options; the lock bits protect flash and EEPROM. A fuse bit is programmed at 0 . Change a setting and the byte below updates; the starting values are the factory defaults.
CKDIV8 Divide clock by 8 internally 1 · unprogrammed 0 · programmed DWEN Debug Wire enable 1 · unprogrammed 0 · programmed SPIEN Serial program downloading (SPI) enabled 1 · unprogrammed 0 · programmed WDTON Watch-dog Timer always on 1 · unprogrammed 0 · programmed EESAVE Preserve EEPROM memory through the Chip Erase cycle 1 · unprogrammed 0 · programmed BOOTRST Select interrupt vector location 1 · unprogrammed 0 · programmed RSTDISBL Disable external Reset 1 · unprogrammed 0 · programmed EXTCLKEN External Clock enable 1 · unprogrammed 0 · programmed Lock bits 0xFF default 0xFF BLP Boot Loader Protection LPM and SPM prohibited in Boot Loader Section LPM prohibited in Boot Loader Section SPM prohibited in Boot Loader Section No lock on SPM and LPM in Boot Loader Section AP Application Protection LPM and SPM prohibited in Application Section LPM prohibited in Application Section SPM prohibited in Application Section No lock on SPM and LPM in Application Section LB Memory Lock Further programming and verification disabled Further programming disabled No memory lock features enabled