ATmega649P interrupt vectors

The 23 vectors at the start of flash, two words each (a JMP). A lower number has the higher priority; vector 0 is reset. In avr-gcc a handler is ISR(NAME_vect).

Vector	Program address	Name	Handler	Source
0	`0x0000`	RESET	reset: `main()` after start-up	External Pin,Power-on Reset,Brown-out Reset,Watchdog Reset,and JTAG AVR Reset. See Datasheet.
1	`0x0002`	INT0	`INT0_vect`	External Interrupt Request 0
2	`0x0004`	PCINT0	`PCINT0_vect`	Pin Change Interrupt Request 0
3	`0x0006`	PCINT1	`PCINT1_vect`	Pin Change Interrupt Request 1
4	`0x0008`	TIMER2_COMP	`TIMER2_COMP_vect`	Timer/Counter2 Compare Match
5	`0x000A`	TIMER2_OVF	`TIMER2_OVF_vect`	Timer/Counter2 Overflow
6	`0x000C`	TIMER1_CAPT	`TIMER1_CAPT_vect`	Timer/Counter1 Capture Event
7	`0x000E`	TIMER1_COMPA	`TIMER1_COMPA_vect`	Timer/Counter1 Compare Match A
8	`0x0010`	TIMER1_COMPB	`TIMER1_COMPB_vect`	Timer/Counter Compare Match B
9	`0x0012`	TIMER1_OVF	`TIMER1_OVF_vect`	Timer/Counter1 Overflow
10	`0x0014`	TIMER0_COMP	`TIMER0_COMP_vect`	Timer/Counter0 Compare Match
11	`0x0016`	TIMER0_OVF	`TIMER0_OVF_vect`	Timer/Counter0 Overflow
12	`0x0018`	SPI_STC	`SPI_STC_vect`	SPI Serial Transfer Complete
13	`0x001A`	USART0_RX	`USART0_RX_vect`	USART0, Rx Complete
14	`0x001C`	USART0_UDRE	`USART0_UDRE_vect`	USART0 Data register Empty
15	`0x001E`	USART0_TX	`USART0_TX_vect`	USART0, Tx Complete
16	`0x0020`	USI_START	`USI_START_vect`	USI Start Condition
17	`0x0022`	USI_OVERFLOW	`USI_OVERFLOW_vect`	USI Overflow
18	`0x0024`	ANALOG_COMP	`ANALOG_COMP_vect`	Analog Comparator
19	`0x0026`	ADC	`ADC_vect`	ADC Conversion Complete
20	`0x0028`	EE_READY	`EE_READY_vect`	EEPROM Ready
21	`0x002A`	SPM_READY	`SPM_READY_vect`	Store Program Memory Read
22	`0x002C`	LCD	`LCD_vect`	LCD Start of Frame