ATtiny1634 interrupt vectors

The 28 vectors at the start of flash, two words each (a JMP). A lower number has the higher priority; vector 0 is reset. In avr-gcc a handler is ISR(NAME_vect).

Vector	Program address	Name	Handler	Source
0	`0x0000`	RESET	reset: `main()` after start-up	External Pin, Power-on Reset, Brown-out Reset and Watchdog Reset
1	`0x0002`	INT0	`INT0_vect`	External Interrupt Request 0
2	`0x0004`	PCINT0	`PCINT0_vect`	Pin Change Interrupt Request 0
3	`0x0006`	PCINT1	`PCINT1_vect`	Pin Change Interrupt Request 1
4	`0x0008`	PCINT2	`PCINT2_vect`	Pin Change Interrupt Request 2
5	`0x000A`	WDT	`WDT_vect`	Watchdog Time-out Interrupt
6	`0x000C`	TIMER1_CAPT/TIM1_CAPT	`TIMER1_CAPT_vect, TIM1_CAPT_vect`	Timer/Counter1 Capture Event
7	`0x000E`	TIMER1_COMPA/TIM1_COMPA	`TIMER1_COMPA_vect, TIM1_COMPA_vect`	Timer/Counter1 Compare Match A
8	`0x0010`	TIMER1_COMPB/TIM1_COMPB	`TIMER1_COMPB_vect, TIM1_COMPB_vect`	Timer/Counter1 Compare Match B
9	`0x0012`	TIMER1_OVF/TIM1_OVF	`TIMER1_OVF_vect, TIM1_OVF_vect`	Timer/Counter1 Overflow
10	`0x0014`	TIMER0_COMPA/TIM0_COMPA	`TIMER0_COMPA_vect, TIM0_COMPA_vect`	TimerCounter0 Compare Match A
11	`0x0016`	TIMER0_COMPB/TIM0_COMPB	`TIMER0_COMPB_vect, TIM0_COMPB_vect`	TimerCounter0 Compare Match B
12	`0x0018`	TIMER0_OVF/TIM0_OVF	`TIMER0_OVF_vect, TIM0_OVF_vect`	Timer/Counter0 Overflow
13	`0x001A`	ANA_COMP	`ANA_COMP_vect`	Analog Comparator
14	`0x001C`	ADC/ADC_READY	`ADC_vect, ADC_READY_vect`	ADC Conversion Complete
15	`0x001E`	USART0_START/USART0_RXS	`USART0_START_vect, USART0_RXS_vect`	USART0, Start
16	`0x0020`	USART0_RX/USART0_RXC	`USART0_RX_vect, USART0_RXC_vect`	USART0, Rx Complete
17	`0x0022`	USART0_UDRE/USART0_DRE	`USART0_UDRE_vect, USART0_DRE_vect`	USART0 Data Register Empty
18	`0x0024`	USART0_TX/USART0_TXC	`USART0_TX_vect, USART0_TXC_vect`	USART0, Tx Complete
19	`0x0026`	USART1_START/USART1_RXS	`USART1_START_vect, USART1_RXS_vect`	USART1, Start
20	`0x0028`	USART1_RX/USART1_RXC	`USART1_RX_vect, USART1_RXC_vect`	USART1, Rx Complete
21	`0x002A`	USART1_UDRE/USART1_DRE	`USART1_UDRE_vect, USART1_DRE_vect`	USART1 Data Register Empty
22	`0x002C`	USART1_TX/USART1_TXC	`USART1_TX_vect, USART1_TXC_vect`	USART1, Tx Complete
23	`0x002E`	USI_START/USI_STR	`USI_START_vect, USI_STR_vect`	USI Start Condition
24	`0x0030`	USI_OVERFLOW/USI_OVF	`USI_OVERFLOW_vect, USI_OVF_vect`	USI Overflow
25	`0x0032`	TWI_SLAVE/TWI	`TWI_SLAVE_vect, TWI_vect`	Two-wire Serial Interface
26	`0x0034`	EE_RDY	`EE_RDY_vect`	EEPROM Ready
27	`0x0036`	QTRIP	`QTRIP_vect`	Touch Sensing