ATtiny4313 interrupt vectors

The 21 vectors at the start of flash, one word each (an RJMP). A lower number has the higher priority; vector 0 is reset. In avr-gcc a handler is ISR(NAME_vect).

Vector	Program address	Name	Handler	Source
0	`0x0000`	RESET	reset: `main()` after start-up	External Reset, Power-on Reset and Watchdog Reset
1	`0x0001`	INT0	`INT0_vect`	External Interrupt Request 0
2	`0x0002`	INT1	`INT1_vect`	External Interrupt Request 1
3	`0x0003`	TIMER1_CAPT	`TIMER1_CAPT_vect`	Timer/Counter1 Capture Event
4	`0x0004`	TIMER1_COMPA	`TIMER1_COMPA_vect`	Timer/Counter1 Compare Match A
5	`0x0005`	TIMER1_OVF	`TIMER1_OVF_vect`	Timer/Counter1 Overflow
6	`0x0006`	TIMER0_OVF	`TIMER0_OVF_vect`	Timer/Counter0 Overflow
7	`0x0007`	USART_RX	`USART_RX_vect`	USART, Rx Complete
8	`0x0008`	USART_UDRE	`USART_UDRE_vect`	USART Data Register Empty
9	`0x0009`	USART_TX	`USART_TX_vect`	USART, Tx Complete
10	`0x000A`	ANA_COMP	`ANA_COMP_vect`	Analog Comparator
11	`0x000B`	PCINT_B	`PCINT_B_vect`	Pin Change Interrupt Request B
12	`0x000C`	TIMER1_COMPB	`TIMER1_COMPB_vect`
13	`0x000D`	TIMER0_COMPA	`TIMER0_COMPA_vect`
14	`0x000E`	TIMER0_COMPB	`TIMER0_COMPB_vect`
15	`0x000F`	USI_START	`USI_START_vect`	USI Start Condition
16	`0x0010`	USI_OVERFLOW	`USI_OVERFLOW_vect`	USI Overflow
17	`0x0011`	EEPROM_READY	`EEPROM_READY_vect`
18	`0x0012`	WDT_OVERFLOW	`WDT_OVERFLOW_vect`	Watchdog Timer Overflow
19	`0x0013`	PCINT_A	`PCINT_A_vect`	Pin Change Interrupt Request A
20	`0x0014`	PCINT_D	`PCINT_D_vect`	Pin Change Interrupt Request D