ATtiny43U interrupt vectors

The 16 vectors at the start of flash, one word each (an RJMP). A lower number has the higher priority; vector 0 is reset. In avr-gcc a handler is ISR(NAME_vect).

Vector	Program address	Name	Handler	Source
0	`0x0000`	RESET	reset: `main()` after start-up	External Pin, Power-on Reset, Brown-out Reset,Watchdog Reset
1	`0x0001`	INT0	`INT0_vect`	External Interrupt Request 0
2	`0x0002`	PCINT0	`PCINT0_vect`	Pin Change Interrupt Request 0
3	`0x0003`	PCINT1	`PCINT1_vect`	Pin Change Interrupt Request 1
4	`0x0004`	WDT	`WDT_vect`	Watchdog Time-out
5	`0x0005`	TIM1_COMPA	`TIM1_COMPA_vect`	Timer/Counter1 Compare Match A
6	`0x0006`	TIM1_COMPB	`TIM1_COMPB_vect`	Timer/Counter1 Compare Match B
7	`0x0007`	TIM1_OVF	`TIM1_OVF_vect`	Timer/Counter1 Overflow
8	`0x0008`	TIM0_COMPA	`TIM0_COMPA_vect`	Timer/Counter0 Compare Match A
9	`0x0009`	TIM0_COMPB	`TIM0_COMPB_vect`	Timer/Counter0 Compare Match B
10	`0x000A`	TIM0_OVF	`TIM0_OVF_vect`	Timer/Counter0 Overflow
11	`0x000B`	ANA_COMP	`ANA_COMP_vect`	Analog Comparator
12	`0x000C`	ADC	`ADC_vect`	ADC Conversion Complete
13	`0x000D`	EE_RDY	`EE_RDY_vect`	EEPROM Ready
14	`0x000E`	USI_START	`USI_START_vect`	USI START
15	`0x000F`	USI_OVF	`USI_OVF_vect`	USI Overflow