AVR32DD28 interrupt vectors

The 36 vectors at the start of flash, two words each (a JMP). A lower number has the higher priority; vector 0 is reset. In avr-gcc a handler is ISR(NAME_vect).

Vector	Program address	Name	Handler	Source
0	`0x0000`	RESET	reset: `main()` after start-up	Reset (not listed in the device file)
1	`0x0002`	CRCSCAN_NMI	`CRCSCAN_NMI_vect`
2	`0x0004`	BOD_VLM	`BOD_VLM_vect`
3	`0x0006`	CLKCTRL_CFD	`CLKCTRL_CFD_vect`
4	`0x0008`	MVIO_MVIO	`MVIO_MVIO_vect`
5	`0x000A`	RTC_CNT	`RTC_CNT_vect`
6	`0x000C`	RTC_PIT	`RTC_PIT_vect`
7	`0x000E`	CCL_CCL	`CCL_CCL_vect`
8	`0x0010`	PORTA_PORT	`PORTA_PORT_vect`
9	`0x0012`	TCA0_LUNF/TCA0_OVF	`TCA0_LUNF_vect, TCA0_OVF_vect`
10	`0x0014`	TCA0_HUNF	`TCA0_HUNF_vect`
11	`0x0016`	TCA0_CMP0/TCA0_LCMP0	`TCA0_CMP0_vect, TCA0_LCMP0_vect`
12	`0x0018`	TCA0_CMP1/TCA0_LCMP1	`TCA0_CMP1_vect, TCA0_LCMP1_vect`
13	`0x001A`	TCA0_CMP2/TCA0_LCMP2	`TCA0_CMP2_vect, TCA0_LCMP2_vect`
14	`0x001C`	TCB0_INT	`TCB0_INT_vect`
15	`0x001E`	TCB1_INT	`TCB1_INT_vect`
16	`0x0020`	TCD0_OVF	`TCD0_OVF_vect`
17	`0x0022`	TCD0_TRIG	`TCD0_TRIG_vect`
18	`0x0024`	TWI0_TWIS	`TWI0_TWIS_vect`
19	`0x0026`	TWI0_TWIM	`TWI0_TWIM_vect`
20	`0x0028`	SPI0_INT	`SPI0_INT_vect`
21	`0x002A`	USART0_RXC	`USART0_RXC_vect`
22	`0x002C`	USART0_DRE	`USART0_DRE_vect`
23	`0x002E`	USART0_TXC	`USART0_TXC_vect`
24	`0x0030`	PORTD_PORT	`PORTD_PORT_vect`
25	`0x0032`	AC0_AC	`AC0_AC_vect`
26	`0x0034`	ADC0_RESRDY	`ADC0_RESRDY_vect`
27	`0x0036`	ADC0_WCMP	`ADC0_WCMP_vect`
28	`0x0038`	ZCD3_ZCD	`ZCD3_ZCD_vect`
29	`0x003A`	PORTC_PORT	`PORTC_PORT_vect`
30	`0x003C`	TCB2_INT	`TCB2_INT_vect`
31	`0x003E`	USART1_RXC	`USART1_RXC_vect`
32	`0x0040`	USART1_DRE	`USART1_DRE_vect`
33	`0x0042`	USART1_TXC	`USART1_TXC_vect`
34	`0x0044`	PORTF_PORT	`PORTF_PORT_vect`
35	`0x0046`	NVMCTRL_EE	`NVMCTRL_EE_vect`