PIC10LF320 configuration bits The configuration words set the oscillator, the watchdog, the power-up timer, brown-out reset, low-voltage programming and code protection. Pick a setting and the word below updates; the starting values are the defaults in Microchip's device file. In XC8 each setting is a #pragma config NAME = SETTING line.
CONFIG · 0x2007 0x3FFF default 0x3FFF WRT Flash Memory Self-Write Protection 000h to 0FFh write protected, no addresses may be modified by PMCON control 000h to 07Fh write protected, 080h to 0FFh may be modified by PMCON control 000h to 03Fh write protected, 040h to 0FFh may be modified by PMCON control Write protection off BORV Brown-out Reset Voltage Selection Brown-out Reset Voltage (Vbor), high trip point selected. Brown-out Reset Voltage (Vbor), low trip point selected. LPBOR Brown-out Reset Selection bits BOR disabled BOR enabled LVP Low-Voltage Programming Enable High-voltage on MCLR/VPP must be used for programming Low-voltage programming enabled CP Code Protection bit Program memory code protection is enabled Program memory code protection is disabled MCLRE MCLR Pin Function Select bit MCLR pin function is digital input, MCLR internally tied to VDD MCLR pin function is MCLR PWRTE Power-up Timer Enable bit PWRT enabled PWRT disabled WDTE Watchdog Timer Enable WDT disabled WDT controlled by the SWDTEN bit in the WDTCON register WDT enabled while running and disabled in Sleep WDT enabled BOREN Brown-out Reset Enable Brown-out Reset disabled Brown-out Reset controlled by the SBOREN bit in the BORCON register Brown-out Reset enabled while running and disabled in Sleep Brown-out Reset enabled FOSC Oscillator Selection bits INTOSC oscillator: CLKIN function disabled EC: CLKIN function enabled 
BETA