PIC16F753 configuration bits The configuration words set the oscillator, the watchdog, the power-up timer, brown-out reset, low-voltage programming and code protection. Pick a setting and the word below updates; the starting values are the defaults in Microchip's device file. In XC8 each setting is a #pragma config NAME = SETTING line.
CONFIG · 0x2007 0x3FFF default 0x3FFF CKLOUTEN Clock Out Enable bit CLKOUT function enabled. CLKOUT pin is CLKOUT CLKOUT function disabled. CLKOUT pin acts as I/O WRT Flash Program Memory Self Write Enable bit 000h to 3FFh self-write protected 000h to 1FFh self-write protected 000h to 0FFh self-write protected Flash self-write protection off BOREN Brown-out Reset Enable bits BOR disabled BOR enabled during operation and disabled in Sleep BOR enabled CP Code Protection bit Program memory code protection is enabled Program memory code protection is disabled MCLRE MCLR/VPP Pin Function Select bit MCLR pin is alternate function MCLR pin is MCLR function with internal weak pullup PWRTE Power-up Timer Enable bit Power-up Timer enabled Power-up Timer disabled WDTE Watchdog Timer Enable bit Watchdog Timer disabled Watchdog Timer enabled FOSC0 FOSC: Oscillator Selection bit Internal oscillator mode. I/O function on RA5/CLKIN EC oscillator mode. CLKIN function on RA5/CLKIN 
BETA