PIC32MK1024GPK100 DAC1 registers

The 1 register of DAC1 (Digital-to-analog converter 1), from 0xBF82C200, with their reset value and every field. The PIC32MK1024GPK100 has 1208 registers in 107 peripherals, one page each.

Most PIC32 SFRs have three more registers right after them: CLR at +4, SET at +8 and INV at +C (T1CONCLR, T1CONSET, T1CONINV), which clear, set or flip just the bits written as 1, in one write.

DAC1 Digital-to-analog converter 1

DAC1CONCDAC Control Register

Address
0xBF82C200
Reset
0x00000000
Access
read/write
Size
32-bit
4 fields
FieldBitsWhat it does
DACDAT27:16Data Input Register Bits for the CDAC
ON15CDAC Enable
  • 0 The CDAC is disabled
  • 1 The CDAC is enabled
DACOE8CDAC Output Enable
  • 0 Output is disabled; drive to pin is floating
  • 1 Output is enabled; CDAC voltage is connected to the pin
REFSEL1:0Reference Source Select
  • 0 No reference selected (no reference current consumption)
  • 3 Positive reference voltage = AVDD