PS500 configuration bits The configuration words set the oscillator, the watchdog, the power-up timer, brown-out reset, low-voltage programming and code protection. Pick a setting and the word below updates; the starting values are the defaults in Microchip's device file. In XC8 each setting is a #pragma config NAME = SETTING line.
CONFIG2H · 0x300003 0xFF default 0xFF WDT Watchdog Timer Disabled-Controlled by SWDTEN bit Enabled CONFIG3H · 0x300005 0xFF default 0xFF MCLRE Master Clear Enable MCLR disabled, RA5 input enabled MCLR enabled, RA5 input disabled CONFIG4L · 0x300006 0xFF default 0xFF BACKBUG Background Debug Enabled Disabled STVR Stack Overflow Reset Disabled Enabled CONFIG5L · 0x300008 0xFF default 0xFF CP_23 Code Protect 002000-003FFF Enabled Disabled CP_01 Code Protect 000200-001FFF Enabled Disabled CONFIG5H · 0x300009 0xFF default 0xFF CPD Data EE Read Protect Enabled Disabled CPB Code Protect Boot Enabled Disabled CONFIG6L · 0x30000A 0xFF default 0xFF WRT23 Table Write Protect 02000-03FFF Enabled Disabled WRT01 Table Write Protect 00200-01FFF Enabled Disabled CONFIG6H · 0x30000B 0xFF default 0xFF WRTD Data EE Write Protect Enabled Disabled WRTB Table Write Protect Boot Enabled Disabled WRTC Config. Write Protect Enabled Disabled CONFIG7L · 0x30000C 0xFF default 0xFF EBTR_23 Table Read Protect 002000-03FFF Enabled Disabled EBTR_01 Table Read Protect 00200-01FFF Enabled Disabled CONFIG7H · 0x30000D 0xFF default 0xFF EBTRB Table Read Protect Boot Enabled Disabled 
BETA