PS810 configuration bits The configuration words set the oscillator, the watchdog, the power-up timer, brown-out reset, low-voltage programming and code protection. Pick a setting and the word below updates; the starting values are the defaults in Microchip's device file. In XC8 each setting is a #pragma config NAME = SETTING line.
CONFIG2H · 0x300003 0xFF default 0xFF WDT Watchdog Timer Disabled-Controlled by SWDTEN bit Enabled CONFIG3H · 0x300005 0xFF default 0xFF MCLRE Master Clear Enable MCLR disabled, RA5 input enabled MCLR enabled, RA5 input disabled CONFIG4L · 0x300006 0xFF default 0xFF BACKBUG Background Debug Enabled Disabled STVR Stack Overflow Reset Disabled Enabled CONFIG5L · 0x300008 0xFF default 0xFF CP_01 Code Protect 000200-001FFF Enabled Disabled CONFIG5H · 0x300009 0xFF default 0xFF CPB Code Protect Boot 000000-0001FF Enabled Disabled CONFIG6L · 0x30000A 0xFF default 0xFF WRT01 Table Write Protect 000200-001FFF Enabled Disabled CONFIG6H · 0x30000B 0xFF default 0xFF WRTB Table Write Protect Boot 000000-0001FF Enabled Disabled WRTC Config. Write Protect 300000-3000FF Enabled Disabled CONFIG7L · 0x30000C 0xFF default 0xFF EBTR01 Table Read Protect 000200-001FFF Enabled Disabled CONFIG7H · 0x30000D 0xFF default 0xFF EBTRB Table Read Protect Boot 000000-0001FF Enabled Disabled 
BETA