The Engineering Projects

Short Overview of Cisco CCENT Certification Exam Dumps

Cisco is undoubtedly one of the biggest companies, especially if you talk about networking. The organization is known for providing high-quality networking solutions to many enterprises. In fact, if you take a closer look, then you will notice that the majority of IT organizations out there use the networking solutions provided by Cisco. However, that is not all that the company is known for,Ciscoalso offers a number of certifications. Naturally, most of these credentials are closely linked to networking, so you need to have a keen interest in networking to try to earn one of its certificates. One of the main certifications that it offers is Cisco CCENT. The CCENT Certification Exam Dumps (Cisco Certified Entry Networking Technician) credential is the first step in the Cisco pathway. To earn it, the candidate should pass one relevant exam – 100-105 that is also called ICND1 that means Interconnecting Cisco Networking Devices (Part 1). As the name suggests, ICND1 is one of two different exams, but here we are only focusing on the Cisco 100-105 exam. If you are someone who is interested in networking, then you should try to earn the CCENT certificate. Earning thiscredential means that your skills will be validated by Cisco itself, and that is a lot in the world of IT. To know more about certification advantages, follow the link: If employers see that you are certified by Cisco, then they will surely prioritize you more than the other job seekers. In other words, you will have a better chance of securing a good job position.

Exam Details

The Cisco 100-105 exam is just like any other test: there is a fixed exam pattern that is occasionally revisedbut it remains the same for the most part. Currently,the testconsists of 45-55 questions, and all of them need to be answered within 90 minutes. Take your time with each question, but pay special attention to your time limit. With so many challenging questions to answer, time management is key. The questions come from various topics, but there are five main ones that make up most of the Cisco 100-105 exam. They are as follows:

• LAN Switching Fundamentals (26%)
• Routing Fundamentals (25%)
• Network Fundamentals (20%)
• Infrastructure Services (15%)
• Infrastructure Maintenance (14%)

The topics are already defined, which makes a preparation for the Cisco 100-105 test a little simpler. All you need to do is learn the necessary information related to all the aforementioned topics, and you will be good to go. To find more information, follow the link:

Exam Preparation

The Cisco 100-105 test is just like any other exams, and you will have to prepare yourself properly in order to pass it with success. First and foremost, you need to understand that you have to start your preparation quickly. You should begin a few months prior to the exam, so that you have enough time to prepare. Remember that if you get your hands on this certification, then it can do wonders for you, so work hard and try to get it on the first try. Scheduling is an important part to think about when it comes to a preparation processbecause there are quite a few topics that you need to cover, and you have to give each topic the due time that it deserves. If you have created a timetable, then make sure that you follow it properly, otherwise it will be worthless. The Cisco 100-105 exam is not exactly new, so it will be very easy for you to find many study resources on the Internet. There are many online communities where people from all around the world come together to talk about thistest. Find these communities and interact with other test takers there. All these people can prove to be a very valuable assetbecause they can give you links to other sources that you can use to prepare for the exam. Some of them might also share their experience of writing the Cisco 100-105 certification test. While you are at it, you should also look for the official study guide. It will tell you about the main topics that you need to focus on, and what the exam will be about. Use this study resource to your advantage and stay close to itbecause the information contained in it can help you ace the test on the first try. Practice is always advisable, and you should never forget that. If you wish to practice for the 100-105 exam, then the Internet is your best choice. Here you can find many different practice tests, which consist of the questions that have been encountered during similar tests. Take as many of these practice exams as you can because this is the closest you can get to the actual test environment. Some of these practice tests might also show you your result at the end, and this way you can evaluate your skills before it is too late. You can then identify the areas that need more work and start concentrating on them. However, just keep in mind that you don’t have to memorize any of these questionsbecause they will never be repeated. Use these questions for practice only and don’t think that you will face then during your exam. One thing that you should keep in mind is that you need to use all these preparation methods together. Don’t just stick to one of them, because you will learn different things from each of these sources.

Conclusion

These were the crucial details that you should know about the Cisco 100-105 certification exam. It is undoubtedly one of the most popular certifications that Cisco currently offers, and there are many people who are getting in line to earn it. There are many benefits that this credential brings, that is why it is recommended that you get it as soon as possible. If you are someone who dreams about getting a decent networking job, then the Cisco CCENT certificate can help you make your dreams come true. Don’t be disappointed if you don’t pass the teston the first trybecause you can always have another go. Plus, the knowledge that you gained during your exam preparation will never go to waste and you can use it the next time you take the exam.

Create a New Controller in ASP.NET MVC

Hello friends, I hope you all are doing great. In today's tutorial, we are gonna Create a New Controller in ASP.NET MVC. It's 6th tutorial in our ASP.Net MVC series. We have already had a look at basic Introduction to Controllers in ASP.NET MVC and they are used to communicate between Views & Models. So, now we are gonna have a look at How to Create a New Controller in ASP.NET MVC. It's a very quick tutorial, as there's not much to do with Controller rite now, we will just create one. So, let's get started with it:

Create a New Controller in ASP.NET MVC

• In order to Create a New Controller in ASP.NET MVC, you have to right click on the Controllers folder in Solution Explorer.
• Now click on the Add and then click on Controllers as shown in below figure:

• It will open up a new window which will have different types of Controllers and are used for different purposes.

• Here, we have to select the second one as we want to perform read/ write actions.
• So, select MVC 5 Controller with read / write actions and then clock Add Button, as shown in below figure:

• When you click the Add Button, it will ask for the Controller name.
• I have assigned it a name StudentController, now click the Add button, as shown in below figure:

• Now when we click the Add button, then a scaffolding operation will start by visual studio and it will automatically create our new controller.
• This new Controller file will also open up in our work space and it will have some classes by default in it, as shown in below figure:

• We have successfully created our new Controller to read or write data.
• In our previous lecture, we have already created a new Model in ASP.NET MVC.
• So, now we are only left with the Views which we are gonna create in our next tutorial and will also bind them together.
• Here's a video demonstration of How to Create a new Controller in ASP.NET MVC, it will help for better understanding:

So, that was all about How to Create a New controller in ASP.NET MVC. If you have any questions, then ask in comments and I will surely help you out. Thanks for reading. Take care.

Create a New Model in ASP.NET MVC

[vc_row full_width_row="true"][vc_column][vc_column_text] Hello friends, I hope you all are doing great. In today's tutorial, we are gonna have a look at How to Create a New Model in ASP.NET MVC. It's 5th tutorial in ASP MVC series. We have already seen the basic concept of Model in ASP.NET MVC in our second tutorial. Models are used to communicate data from SQL Database to respective Controllers, which is then displayed by the Views to the user. When you are designing some professional website then it happens a lot that you need to place different data in your databases, normally this data is coming from users. So, in such cases you have to create new models and then assign respective controllers to them. So, today we will see How to do the first part i.e. creating new models in asp.net mvc.

Create a New Model in ASP.NET MVC

• Models in ASP.NET MVC are simple C# classes and if you look at their file extension then it's .cs, so we just need to create a new C# class file.
• So, in your Solution Explorer, right click on the Models folder.

• Now click on the Add and then click on Class, as shown in below figure:

• When you click on the Class, it will open up a new window.
• In this new window, you need to select Class and then write some name for it, as I have given it a name StudentModel.cs.
• Finally, click the Add Button, these settings are shown in below figure:

• When you click on this Add Button, visual studio will automatically create a new Model file in your Models Folder.
• This new Model File will also open up in your workspace and will have small default code in it, as shown in below figure:

• Now I will create some attributes in my new Model File, where I ask for some basic registering details from my students.
• I will use them later after creating a new Controller & View for this model, but rite now we are just doing the server side programming, there's no client side involved.
• So, let's have a look at the Model Code:

• You can see in above figure that I have created four variables inside my new StudentModel class.
• All these variables have a datatype of string and are initialized with two further attributes get & set.
• When we need to get value from SQL, then we use get & when we want to save some value then we use set.

Note:

• I am not sharing any codes because we are in initial phases & it's more about understanding the flow of coding.
• I will start share the code once we start writing it, rite now there's not much coding part.

• Let's have a look at the video explanation for better understanding:

So, that was all about Creating new Model in ASP.NET MVC. In the coming lecture, we will create new Controller in ASP.NET MVC for this model. So, take care & have fun !!! :) [/vc_column_text][/vc_column][/vc_row]