Skip to datasheet
Surface-mount Schottky rectifier

SS34 Basic Circuit

Build a basic SS34 circuit with labeled pins, component values and connection guidance.

SS34 in a circuit

A physical diode in series with a current-limited load.

Isolated 5 V source to SS34 anode, banded cathode to 100 ohm load, common ground; calculated output 4.6 V.
Illustrative fixed 0.4 V diode model; not a measured or simulated result.

Connect it, step by step

Follow the component values and pin connections

Source to anode

Connect +5 V to A2.

Band to load

Connect K1 to the 100 Ω resistor.

Common return

Both ground symbols refer to the same source-negative connection.

Component view