ATtiny841 interrupt vectors

The 30 vectors at the start of flash, one word each (an RJMP). A lower number has the higher priority; vector 0 is reset. In avr-gcc a handler is ISR(NAME_vect).

Vector	Program address	Name	Handler	Source
0	`0x0000`	RESET	reset: `main()` after start-up	External Pin, Power-on Reset, Brown-out Reset and Watchdog Reset
1	`0x0001`	INT0	`INT0_vect`	External Interrupt Request 0
2	`0x0002`	PCINT0	`PCINT0_vect`	Pin Change Interrupt Request 0
3	`0x0003`	PCINT1	`PCINT1_vect`	Pin Change Interrupt Request 1
4	`0x0004`	WDT	`WDT_vect`	Watchdog Time-out Interrupt
5	`0x0005`	TIMER1_CAPT	`TIMER1_CAPT_vect`	Timer/Counter1 Capture Event
6	`0x0006`	TIMER1_COMPA	`TIMER1_COMPA_vect`	Timer/Counter1 Compare Match A
7	`0x0007`	TIMER1_COMPB	`TIMER1_COMPB_vect`	Timer/Counter1 Compare Match B
8	`0x0008`	TIMER1_OVF	`TIMER1_OVF_vect`	Timer/Counter1 Overflow
9	`0x0009`	TIMER0_COMPA	`TIMER0_COMPA_vect`	TimerCounter0 Compare Match A
10	`0x000A`	TIMER0_COMPB	`TIMER0_COMPB_vect`	TimerCounter0 Compare Match B
11	`0x000B`	TIMER0_OVF	`TIMER0_OVF_vect`	Timer/Counter0 Overflow
12	`0x000C`	ANA_COMP0	`ANA_COMP0_vect`	Analog Comparator 0
13	`0x000D`	ADC	`ADC_vect`	ADC Conversion Complete
14	`0x000E`	EE_RDY	`EE_RDY_vect`	EEPROM Ready
15	`0x000F`	ANA_COMP1	`ANA_COMP1_vect`	Analog Comparator 1
16	`0x0010`	TIMER2_CAPT	`TIMER2_CAPT_vect`	Timer/Counter2 Capture Event
17	`0x0011`	TIMER2_COMPA	`TIMER2_COMPA_vect`	Timer/Counter2 Compare Match A
18	`0x0012`	TIMER2_COMPB	`TIMER2_COMPB_vect`	Timer/Counter2 Compare Match B
19	`0x0013`	TIMER2_OVF	`TIMER2_OVF_vect`	Timer/Counter2 Overflow
20	`0x0014`	SPI	`SPI_vect`	Serial Peripheral Interface
21	`0x0015`	USART0_START	`USART0_START_vect`	USART0, Start
22	`0x0016`	USART0_RX	`USART0_RX_vect`	USART0, Rx Complete
23	`0x0017`	USART0_UDRE	`USART0_UDRE_vect`	USART0 Data Register Empty
24	`0x0018`	USART0_TX	`USART0_TX_vect`	USART0, Tx Complete
25	`0x0019`	USART1_START	`USART1_START_vect`	USART1, Start
26	`0x001A`	USART1_RX	`USART1_RX_vect`	USART1, Rx Complete
27	`0x001B`	USART1_UDRE	`USART1_UDRE_vect`	USART1 Data Register Empty
28	`0x001C`	USART1_TX	`USART1_TX_vect`	USART1, Tx Complete
29	`0x001D`	TWI_SLAVE	`TWI_SLAVE_vect`	Two-wire Serial Interface