7 Reasons to Choose Satellite Streams for Live Streaming TV

Hi Guys! Hope you are doing well. I am back to give you a dose of valuable information as per your needs and demands. Today, I'll highlight the 7 Reasons to Choose Satellite Streams for Live Streaming TV. Let's dive in. Streaming services have provided millions of people around the globe with incredible opportunities for home entertainment. Gone are the days that you had to rely on a cable or satellite TV provider for your entertainment needs, not the mention the high setup fees and subscriptions, hardware installations, etc. With the advent of the internet, as well as advancements in streaming technology, the world now has a plethora of options to catch their favorite shows and get entertained on the go.

7 Reasons to Satellite Streams for Live Streaming TV

Though there is a myriad of ways to stream live television, using Satellite Streams has proven to be the most affordable and hassle-free way to enjoy the best of online television. This is a relatively new service that is redefining how online streaming works and bringing together a whole new experience as far watching TV over the internet is concerned. Here are a few compelling reasons why you should think about Satellite Streams every time you want to watch free live TV on your computer or mobile device.
1. Free with no ads
Rarely do you find a streaming service available for completely free and shows no ads. In most cases, if the service is free, then you can bet that your viewing experience will be interrupted from time to time with ads. However, this is not the case with Satellite Streams. It is completely free with no ads, and this is one of the attributes that sets it apart for similar services on the internet. As such, you are guaranteed of enjoying your live stream for the entire duration without an ad popping up to disrupt you.
2. No registration required
When Satellite Streams claims to be free, it is truly free – you don’t even need to register in order to access the shows you desire to watch. Similar services, including those that are free but show ads, will always require you to create an account before you can access their content. Once you create the account, your inbox will begin to get flooded with all manner of marketing emails. But if you don’t desire to have such a hassle, then you have every reason to consider Satellite Streams for your live streaming needs. With this, all you need to do is open up the website on your browser and start enjoying your viewing. You don’t have to bother with feeling any forms, giving out your email or any other personal detail in the name of registration.
3. It is not geo-locked
You will notice that most of the live streaming services are locked to certain geographical locations based on IP addresses. It means that if you are in a place or a region where the service is blocked, you will not be able to access the content unless you use a workaround such as using a VPN. A good example is live streaming by most of the major television network such as CNBC or Fox News Live. With such, you will have to be in certain locations or territories of the United States and you will also need to have an active subscription in order to access the live streams. But the good news with Satellite Streams is that it is not restricted to any geo-location and irrespective of your current location on the surface of the earth, you will still manage to access its content. All you need is access to the internet and you will be good to go.
4. Superior picture and audio quality
As is always the case, when a service is free, you will expect the quality to be below average. But this is another sector where Satellite Streams completely outshines its competitors. The fact that it is free does not stop them from bringing the absolute best in terms of picture and audio quality. It will interest you to note that the streams you get from Satellite Streams are in full HD broadcasting, with the picture quality of up to 1080p. The sound is also crisp clear and since there is no signal drop-off, you are guaranteed of a quality experience, even when watching the high definition television channels available on the site.
5. You don’t need any hardware
With most of the streaming services available in the market today, there will always need to have an additional streaming device, which will then be connected to your TV set for you to start streaming. In most cases, the streaming device will come at a cost. However, you don’t have to worry about any extra hardware when you use Satellite Streams for your live TV streaming needs. You don’t even need to think about satellite dishes or antennas to help you get a clear reception. So long as you have a decent internet connection, nothing will come in your way of enjoying your favorite live streams from the site.
6. A plethora of quality channels
One thing you will find admirable about Satellite Streams is that it is literally a one-stop-shop for all your live streaming needs. You will find superior quality channels with a variety of streaming options with just one click of your mouse. Irrespective of your live streaming needs, you can rest assured that you will find more than you need with this service. Whether your interest lies in sports, cars shows, live news events, documentaries, home shopping or home entertainment, Satellite Streams always has something for everyone. Just learn how to navigate your way through the interface and you will discover how easy it is to find and locate quality live streams from the site.
7. Flexibility
The flexibility that Satellite Streams offers in terms of the number of devices or gadgets you can use to access your live streams is also something worth taking note of. If you have been a subscriber of on-demand streaming services such as Hulu or Netflix, then you know that at any given time, there is a limited number of devices you can use to access the service under the same account. This is usually limiting, especially when family members want to watch different shows that coincide at the same time. With Satellite Streams, however, this is of no concern at all since you are free to get the streams on multiple devices at the same time. Whether you want to watch on your laptop or you want to catch up with the live news events on your Smartphone on your way after work, you have the flexibility you need to enjoy just as much as you want. Hopefully, you now understand why Satellite Streams is such an interesting service, especially during a period when TV subscription fees tend to be going through the roof. It has presented an awesome alternative to most of the streaming services, and unless you like binge-watching or following up on shows available on select networks or services, you will always have more than you need with Satellite Streams. Given that it is a free service which avails so much, it is your time to enjoy while it still lasts. Perhaps, the only challenge you may face is with the internet connections since you may not get a very good experience if you have a weak link. Additionally, we don’t know when the service will start asking for subscriptions, but for now, you can enjoy the live streams without a worry in the world. That's all for today. I hope you have found this article useful. You are most welcome to approach in the comment section below for any query. Thanks for reading the article.

Introduction to Arduino Micro

Hey Guys! Hope you are getting along with life pretty well. Welcome you onboard. Today, I'll unlock the details on the Introduction to Arduino Micro. It is a Micro board, based on the ATmega32U4 microcontroller and comes with built-in USB, making it easily compatible with the computer. Arduino Micro, as the name suggests, is the smallest board in the Arduino Community. It is comparable to its counterparts like Arduino Nano and Arduino Promini. In this tutorial, I'll discuss each and everything related to Micro board including its main features, pinout, pin description, the software used and applications. Let's dive in and explore everything you need to know about this tiny board.

Introduction to Arduino Micro

  • Arduino Micro is the smallest board in the Arduino Community and is mainly based on the ATmega32U4 microcontroller.
  • It contains a built-in USB on the tiny easy to integrate interface, that helps in laying out a prompt connection with the computer.
  • Don't get into the illusion of performing complex functions that require more memory space, as this little toy comes with flash memory around 32 KB while EEPROM and SRAM are 2.5 KB and 1 KB respectively, still enough to wet your technical appetite.
  • The maximum length and width of the Micro PCB are 4.8cm and 1.77cm respectively, however, with the attached USB port the dimensions will slightly be larger than the given parameters, exceeding from the edge of the PCB layout.
  • Breadboard compatibility makes this device easy to use for getting a hands-on experience before incorporating it in the relevant project with all prerequisites.
  • You can download Arduino Micro Datasheet by clicking below button:
Download Arduino Micro Datasheet
  • The ATmega32U4 microcontroller available on the board features UART communication with TX and RX pins.
  • The Micro board incorporates resettable poly-fuse that that is mainly used for securing computer's USB ports from shorts and overcurrent by providing an extra layer of protection.
  • If the current escalates from the required value to the USB port, the fuse will jump in and work as an emergency switch, breaking the connection between the board and computer. It is advised to keep the provided current to the USB port under 500mA.

1. Arduino Micro Features

If you are aiming to pick this Arduino module for your relevant project, it is advised to get a hold of its features in order to avoid any hassle in future. The following figure shows the main features of Arduino Micro.
Microcontroller ATmega32U4
CPU 8-Bit
Digital I/O Pins 24
PWM Output 7
Analog Input 12
Flash Memory (Program Memory) 32 KB
SRAM 2.5 KB
EEPROM 1 KB
Input Voltage 7-12 V
Operating Voltage 5 V
Oscillator up to 16 MHz
Software Used Arduino Software (IDE)
Reset Button Yes
ICSP Header Yes
USB Port 1
UART (Serial Communication) Yes
  • Serial communication along with SPI and I2C communications are available on the board. The physical reset button is added that helps to stop the running function and puts the controller in the initial condition from where it takes and implements the stored information from scratch.

2. Arduino Micro Pinout

Following figure shows the Arduino Micro Pinout diagram.
  • You may have heard, at times, tiny things work wonders. Same is true with this module. It is nothing but a technical peripheral device with a number of features laid out and housed in one package.
  • Still, as I have mentioned earlier, it operates perfectly if you plan to design the simple project that requires less memory space. Arduino Due and Arduino Leonardo are preferred to meet your technical needs if your project requirements are complex and require more memory space in order to design and drive automation in the relevant project.
  • The built-in USB communication on the board removes the need for a secondary processor and helps it to appear to a connected computer as a keyboard and mouse, in addition to a virtual (CDC) serial / COM port.

3. Arduino Micro Pin Description

Until now, you have got a brief overview of this device and how this module can be a good fit for your project. In this section, I'll discuss the pin description with images, you can easily grab the idea what are the major functions associated with each pin. Let's get to the point.
Analog Input
There are 12 analog inputs on the board. You can see them in the figure below.
Communication Protocols
Communication protocols like serial, SPI and I2C are incorporated on the board. You can see them highlighted on the figure below.
PWM Output
Seven pins are used for PWM output purpose. It is a process for getting analog results with digital means. You can see PWM in the figure below.
Power Source
The 5V is a voltage at which board operates while 3.3V is the operating voltage of each pin. The Vin is the input voltage that ranges between +7 to +12 V and is a  voltage from the external power source, not from a USB port. There are two ground pins on the board. The AREF predicts the Analogue reference voltage that helps to inject the Arduino a reference voltage from an external power supply. You can see the power source in the figure below.
External Interrupt
PCINT are the external interrupts generated on any digital I/O pin. The following figure shows the pins on which external interpret can be generated.
ICSP Header Pins
ICPS head is added on the board and it stands for In-Circuit Serial Programming - A feature used for programming Arduino with another Arduino. And if USB port is not available, it comes out handy for connecting the board with a computer for uploading a sketch.

4. Programming

  • Arduino Software, called IDE, is mainly used for programming the Arduino module and it works perfectly with common operating systems like Windows, Linux or MAC. You can download it from the Arduino site and it is compatible with all versions in the Arduino family.
  • You are ready to use the software as you install it. Some simple LED programs are already available on the software so you can easily start working on the board and compile the default program with the intention you are getting the results on the fly.
  • Built-in bootloader that comes with the board lets you off the hook from wresting your mind for compiling and burning the code using the external burner.
  • Micro board features a serial peripheral interface (SPI) that is mainly used in the communication between the microcontroller and other peripheral devices such as shift registers and sensors. Two pins are used for SPI communication i.e. MOSI (Master Output Slave Input) and MISO (Master Input Slave Output) - they are used for sending and receiving the data by the microcontroller.
  • The Serial Monitor is added in Arduino Software, that plays a vital role in transmitting textual data to or from the board.
  • The TX and RX pins are used for serial communication where TX pin transmits the serial data while RX receives the serial data.
  • The board is capable to perform I2C communication using two pins called SDA and SCL.

5. Difference between Arduino ProMini and Arduino Micro

  • There is a little difference between Arduino ProMini and Micro board, however, peripherals on these boards are same.  The built-in USB in the Micro board proves to be a candid difference between two modules while Promini requires FTDI cable in order to generate USB power and communication to the board.
  • The USB on Micro board can act as a number of ways: Keyboard or mouse, USB hard drive, USB to serial Converter and MIDI controller.
  • The Arduino Pro Mini incorporates ATmega328 microcontroller while Arduino Micro comes with ATmega32U4. Flash memory is the same on both modules however, SRAM differs slightly with 2KB on the ProMini and 2.5 KB on the Micro board.
  • Last not least, the Arduino Pro Mini features 2 hardware interrupts while the Micro board comes with 5 hardware interrupts.

6. Arduino Micro Projects and Applications

Arduino micro comes with a wide range of applications with the ability to groove in hard to reach places. It offers a high number of connections with a minimum interface. The outstanding ability of this board to disguise keyboard or mouse while connected with a computer makes it an ideal choice for many computer applications. You can use this board for the development of the following projects.
  • USB Joystick
  • Electric Bike
  • Windows PC lock/unlock application
  • Creating wireless keyboard
  • Automatic Pill Dispenser
  • USB Trackpad
  • Water Level Meter
There is a list of projects you can create but I have mentioned a few of them to give you an idea what this tiny thing can help in designing a product ranging from embedded, automation to computer applications. That's all for today. I hope I have given you everything you needed to know about Arduino Micro. However, if you are unsure and consider something is left unsaid, making it difficult for you to grab the basic idea, you can approach me in the comment section below. I'd love to help you the best way I can. Keep your feedback and suggestions coming and help us create a quality content as per your needs and requirements. Thanks for reading the article.
Syed Zain Nasir

I am Syed Zain Nasir, the founder of <a href=https://www.TheEngineeringProjects.com/>The Engineering Projects</a> (TEP). I am a programmer since 2009 before that I just search things, make small projects and now I am sharing my knowledge through this platform.I also work as a freelancer and did many projects related to programming and electrical circuitry. <a href=https://plus.google.com/+SyedZainNasir/>My Google Profile+</a>

Share
Published by
Syed Zain Nasir