Skip to datasheet
Low-voltage dual operational amplifier

LMV358M Specifications

Review LMV358M electrical specifications, operating conditions and package details.

Key specifications

Amplify small signals close to the output rails.

Recommended supply2.7–5.5 V
Gain-bandwidth1 MHz typical
Operating ambient−40–125 °C
Both amplifiers210 µA typical at 5 V

Package details

LMV358M/NOPB · SOIC-8

Selected package
Selected LMV358M physical package
PropertyDetails
ManufacturerTexas Instruments
Part numberLMV358M/NOPB
PackageSOIC-8
Connections8 pins
MountingSMD
Lead pitch1.27 mm
Package codeSOIC-8
Thermal referenceSee operating and package limits

Operating conditions

LMV358-N · LMV358M/NOPB

Scroll sideways to see all columns.

ParameterValueConditions / notes
Supply2.7–5.5 VRecommended range
Ambient temperature−40 to +125°CSelected industrial part
Input common-mode range at 5 V0–4 V specified; −0.2–4.2 V typicalCMRR ≥ 50 dB
Supply current, both channels210 µA typical; 440 µA max5 V, 25°C; 615 µA max over temperature
Supply absolute maximum5.5 VStress limit; do not exceed

Typical extensions are not guaranteed operating margins.

Input accuracy

5 V and 25°C unless stated

Scroll sideways to see all columns.

ParameterValueConditions / notes
Input offset1.7 mV typical; 7 mV max9 mV max over temperature
Offset drift5 µV/°C typicalNot a guaranteed maximum
Input bias15 nA typical; 250 nA max500 nA max over temperature
Input offset current5 nA typical; 50 nA max150 nA max over temperature
Common-mode rejection65 dB typical; 50 dB min0–4 V common-mode input

Bias current through high source resistance adds an input error.

Speed and output

Conditions matter

Scroll sideways to see all columns.

ParameterValueConditions / notes
Gain-bandwidth1 MHz typical200 pF load
Slew rate1 V/µs typicalManufacturer AC test
HIGH output, 2 kΩ to midpointV+−40 mV typical; V+−300 mV min5 V, 25°C
LOW output, 2 kΩ to midpoint120 mV typical; 300 mV max5 V, 25°C
Over-temperature swing, 2 kΩWithin 400 mV of either railSpecified test load
Short-circuit current40 mA typicalNot a recommended continuous load current

Rail-to-rail does not mean zero headroom at every current.

Gain-three example

5 V supply; light load

Scroll sideways to see all columns.

ParameterValueConditions / notes
Input / ideal output0.50 V / 1.50 VAfter settling, while linear
Feedback resistor Rf20 kΩOUT A1 to IN A−2
Ground resistor Rg10 kΩIN A−2 to GND
SignalVIN to pins 3 and 5Common ground
Second channelJoin pins 6 and 7Voltage follower; output otherwise unloaded
Bypass100 nFPins 8 to 4, close to the IC

Use a high-impedance meter. The explorer uses conservative fixed headroom, not a transistor-level simulation.

Package and limits

LMV358M/NOPB · SOIC-8

Scroll sideways to see all columns.

ParameterValueConditions / notes
Physical pins8SOIC top view
Pitch1.27 mmSMD
Maximum junction150°CApply thermal derating
Storage−65 to +150°CUnpowered
Other packageLMV358MM/NOPB uses VSSOP8Different footprint; not interchangeable with SOIC

No through-hole part is invented for this surface-mount device.

Connections by function

Select a pin for its function, connection guidance and electrical notes.

Analog outputs2 pins

Signal and feedback inputs4 pins

Supply2 pins

Read the conditions with every value

Typical values describe stated test conditions. Absolute maximum ratings are stress limits, not operating targets.

Official PDF datasheet

Component view