Explore Switch (Toggle, Rocker and DIP) pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Lugs 2 (common) and 1 wired to header pads 2 and 1; lug 3 free
Toggle: end lug 1 (C&K) or terminal 3 (E-Switch). Rocker: one tab. DIP switch: pin 1, the square pad. Panel switches reach the board on header pad 1.
Connect to the supply or signal being switched.
A switch has no polarity; respect the voltage and current rating of the switch chosen.
Toggle: terminal 2, the centre (common) one. Rocker: the other tab. DIP switch: pin 2. Header pad 2.
Connect to the load, or to the input being configured.
Closed: 10 mΩ C&K toggle, 20 mΩ / 10 mΩ / 50 mΩ E-Switch 200 / 100 / ST4, 100 mΩ rocker, 50 mΩ DIP (maximum, initial).
BETA