BETARecommended supply3–30 V
Dual operational amplifier
LM358 Specifications
Review LM358 electrical specifications, operating conditions and package details.
Package view
Key specifications
One package, two signal paths. Set their gains with external feedback.
Gain-bandwidth product0.7 MHz · typical
Ambient range0–70 °C
Independent amplifiers2 channels
Package details
LM358P · PDIP-8
| Property | Details |
|---|---|
| Manufacturer | Texas Instruments |
| Part number | LM358P |
| Package | PDIP-8 |
| Connections | 8 pins |
| Mounting | Through-hole |
| Lead pitch | 2.54 mm |
| Package code | P |
| Thermal reference | Board-dependent; see TI thermal table |
Operating conditions
Classic LM358P / LM358D
Manufacturer specifications 4 parameters
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Supply difference | 3–30 V | Recommended operating range |
| Ambient temperature | 0–70°C | LM358 grade |
| Input common-mode range | V− to V+ − 2 V | Recommended operating conditions |
| Supply absolute maximum | 32 V | Stress rating, not an operating target |
No specifications match. Try a parameter name or a unit.
TI SLOS068AB, sections 5.1 and 5.3.
Electrical characteristics
Typical values are not production guarantees
Manufacturer specifications 7 parameters
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Gain-bandwidth product | 0.7 MHz typical | Classic LM358 |
| Slew rate | 0.3 V/µs typical | Unity gain |
| Input offset voltage | 3 mV typical; 7 mV maximum | 25°C; see manufacturer test conditions |
| Input bias current | 20 nA typical magnitude | 25°C |
| Supply current | 350 µA typical per channel | 5 V; unloaded; 0–70°C test row |
| High-side output headroom | 1.5 V typical | 5 V supply, RL ≥ 2 kΩ |
| Near-ground output | 5 mV typical; 20 mV maximum | 5 V; RL ≤ 10 kΩ; 0–70°C |
No specifications match. Try a parameter name or a unit.
TI SLOS068AB, section 5.7. Conditions differ between rows; consult the PDF before selecting a part.
Gain and example readings
Non-inverting DC example
Manufacturer specifications 5 parameters
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Closed-loop gain | 1 + Rf / Rg | Within the linear operating region |
| Example resistors | Rf = 20 kΩ; Rg = 10 kΩ | Gain = 3 |
| Example input / ideal output | 0.50 V / 1.50 V | Calculated, not a measured result |
| Explorer clipping ceiling | 3.50 V | Illustrative 5 V − 1.5 V headroom |
| Explorer input limit | 3.00 V | 5 V − 2 V recommended common-mode headroom |
No specifications match. Try a parameter name or a unit.
The explorer uses a fixed DC headroom approximation. It omits offset, bias, noise, frequency, temperature and load-dependent effects.
Package reference
LM358P · PDIP-8
Manufacturer specifications 4 parameters
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Mounting | Through-hole | Selected physical package |
| Lead pitch | 2.54 mm | Check land pattern dimensions before PCB manufacture |
| Pin mapping | 8 numbered pins | Same functions in PDIP-8 and SOIC-8 |
| Orientation | Top view | Use the notch / pin-1 marker |
No specifications match. Try a parameter name or a unit.
The package selector updates all four views together.
Connections by function
Select a pin for its function, connection guidance and electrical notes.