PGND
Function
Return for the switching stage.
How to connect
Connect the power ground plane and local capacitor returns.
Explore TPS62160 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Top view
Return for the switching stage.
Connect the power ground plane and local capacitor returns.
Input power and control supply.
Apply 3–17 V and bypass locally with 10 µF in the example.
HIGH enables conversion; LOW disables it.
Tie to VIN for the illustrated always-enabled supply.
Reference for feedback and control.
Join to PGND with the recommended short ground layout.
Senses the output divider on the adjustable TPS62160.
Connect 390 kΩ from output and 180 kΩ to AGND in the 2.53 V example.
Do not copy the grounded-FB connection of fixed-output TPS62161/2/3.
Direct feedback for the DCS control loop.
Connect directly to VOUT at the output capacitor; not to SW.
Switching output to the inductor.
Connect 2.2 µH from SW to VOUT; keep the loop compact.
Signals when the output is within its power-good window.
Use a 100 kΩ pull-up to VOUT if the status is used.
High impedance when the device is disabled; it is not a push-pull output.
Present only on the WSON package.
Solder to analog ground copper with appropriate thermal layout.
The VSSOP package has no exposed pad.