TPS7A4700Low-noise programmable positive LDO
Ground-or-open programming for quiet analog rails.
TPS7A4700 is a positive linear regulator intended for low-noise analog supplies. Its output starts at a nominal 1.4 V and increases by the weights of programming pins connected to ground. Unused programming pins remain open; they are not driven by logic voltages. The illustrated 7 V to 5 V circuit grounds the 3.2 V and 0.4 V programming pins. SENSE connects directly to the output, while local input, output and noise-reduction capacitors support stability and noise performance. No external feedback divider is used on this TPS7A4700 example. A linear regulator turns the input-to-output voltage drop into heat. Even with a 1 A capability, the safe operating current depends on voltage drop and the PCB thermal path. Its 5 × 5 mm QFN has twenty perimeter contacts and an underside ground pad that must be soldered to suitable copper.
