OUT
Function
Regulated positive output.
How to connect
Join both OUT pins and connect 47 µF to ground near the package.
Explore TPS7A4700 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Top view; EP is underneath
Regulated positive output.
Join both OUT pins and connect 47 µF to ground near the package.
No functional connection is required.
Leave open in the example.
Direct output-voltage sense for TPS7A4700.
Connect to OUT at the regulated load point.
This is not the external-divider FB mode of TPS7A4701.
Grounding this pin adds 6.4 V to the 1.4 V base setting.
Leave floating in the illustrated 5 V configuration.
Never drive with a positive programming voltage; use ground or open.
Grounding this pin adds 6.4 V to the 1.4 V base setting.
Leave floating in the illustrated 5 V configuration.
Never drive with a positive programming voltage; use ground or open.
Grounding this pin adds 3.2 V to the 1.4 V base setting.
Connect to GND for the illustrated 5 V output.
Never drive with a positive programming voltage; use ground or open.
Ground reference and thermal return.
Connect to a large ground plane; solder the underside pad.
Grounding this pin adds 1.6 V to the 1.4 V base setting.
Leave floating in the illustrated 5 V configuration.
Never drive with a positive programming voltage; use ground or open.
Grounding this pin adds 0.8 V to the 1.4 V base setting.
Leave floating in the illustrated 5 V configuration.
Never drive with a positive programming voltage; use ground or open.
Grounding this pin adds 0.4 V to the 1.4 V base setting.
Connect to GND for the illustrated 5 V output.
Never drive with a positive programming voltage; use ground or open.
Grounding this pin adds 0.2 V to the 1.4 V base setting.
Leave floating in the illustrated 5 V configuration.
Never drive with a positive programming voltage; use ground or open.
Grounding this pin adds 0.1 V to the 1.4 V base setting.
Leave floating in the illustrated 5 V configuration.
Never drive with a positive programming voltage; use ground or open.
HIGH enables the regulator.
Tie to IN for the always-enabled example.
Reference filtering and startup node.
Connect 1 µF to GND.
At least 10 nF is required by the reference datasheet for stability.
Positive supply input.
Join both IN pins to 7 V in the example; bypass with 10 µF.
Positive supply input.
Join both IN pins to 7 V in the example; bypass with 10 µF.
No functional connection is required.
Leave open in the example.
No functional connection is required.
Leave open in the example.
No functional connection is required.
Leave open in the example.
Regulated positive output.
Join both OUT pins and connect 47 µF to ground near the package.
Ground reference and thermal return.
Connect to a large ground plane; solder the underside pad.