Skip to datasheet
Eight-channel push-pull level translator

TXB0108 Basic Circuit

Build a basic TXB0108 circuit with labeled pins, component values and connection guidance.

TXB0108 in a circuit

Both supplies, common ground and defined OE.

Twenty-pin TSSOP, A1 to 3.3 V source, B1 to 5 V receiver, VCCA/VCCB bypass and OE pull-down.
Matching named nets are connected. The receiver must not also drive B1.

Connect it, step by step

Follow the component values and pin connections

Power both domains

Port A follows VCCA (1.2–3.6 V); port B follows VCCB (1.65–5.5 V). Share ground and keep VCCA ≤ VCCB.

Control the enable

Keep OE LOW during startup with a pull-down. Drive it HIGH from the A-voltage domain when both supplies are valid.

Translate without a DIR pin

Weak steady-state buffers and transient edge acceleration let an external push-pull driver establish direction. Do not connect two opposing drivers.

Component view