TXB0108 Reference Tables
Search the TXB0108 pin reference and manufacturer-referenced specification tables.
Pin reference
Signal names, electrical functions and connection guidance
Scroll within the table to see all columns and rows.
| Pin | Signal | Type | Function & connection |
|---|---|---|---|
| A1 | Bidirectional data | Channel 1 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceConnect a 3.3 V logic source. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| VCCA | Power input | Supply for port A. VCCA must not exceed VCCB.Connection guidanceConnect 3.3 V with 100 nF local bypass to GND. | |
| A2 | Bidirectional data | Channel 2 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| A3 | Bidirectional data | Channel 3 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| A4 | Bidirectional data | Channel 4 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| A5 | Bidirectional data | Channel 5 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| A6 | Bidirectional data | Channel 6 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| A7 | Bidirectional data | Channel 7 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| A8 | Bidirectional data | Channel 8 on the A voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| OE | Enable input | HIGH enables translation; LOW makes the ports high impedance. Referenced to VCCA.Connection guidanceUse a 100 kΩ pull-down. Enable from 3.3 V logic only after both supplies are valid. | |
| GND | Ground | Common logic and supply return.Connection guidanceConnect the common ground of both systems. | |
| B8 | Bidirectional data | Channel 8 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| B7 | Bidirectional data | Channel 7 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| B6 | Bidirectional data | Channel 6 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| B5 | Bidirectional data | Channel 5 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| B4 | Bidirectional data | Channel 4 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| B3 | Bidirectional data | Channel 3 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| B2 | Bidirectional data | Channel 2 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceFor an unused channel, tie its A pin to GND and leave B open. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. | |
| VCCB | Power input | Supply for port B. VCCA must not exceed VCCB.Connection guidanceConnect 5 V with 100 nF local bypass to GND. | |
| B1 | Bidirectional data | Channel 1 on the B voltage domain. Noninverting; only one side may drive at a time.Connection guidanceConnect a high-impedance 5 V logic receiver. Push-pull logic only. Not an I2C/open-drain translator; external pull resistors can defeat its weak steady-state drive. |
No pins match these filters. Try another signal name or reset the filters.
Supplies and operating conditions
SCES643L · February 2026
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| VCCA | 1.2–3.6 V | Port A voltage domain |
| VCCB | 1.65–5.5 V | Port B voltage domain |
| Supply relationship | VCCA ≤ VCCB | Required operating condition |
| OE supply reference | VCCA | Do not drive OE from a 5 V source when VCCA is 3.3 V |
| Ambient range | −40 to +85°C | Selected catalog part |
| Local bypass | 100 nF per supply | Close to pins 2 and 19; common ground pin 11 |
No specifications match. Try a parameter name or a unit.
Recommended operating values; absolute stress ratings are not design targets.
Signal type and loading
Auto-direction buffer architecture
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| External driver | Push-pull, able to overdrive the weak buffer | Do not use ordinary open-drain I2C |
| External pull resistors | Prefer none; if required, greater than 50 kΩ | Strong pulls can prevent valid HIGH/LOW levels |
| Data rate | Supply, direction and load dependent | Use the PW package timing tables; no universal speed claim |
| Long cables / high capacitance | Not assumed compatible | One-shot edge acceleration is intended for appropriate short interconnects |
| Output loading | Logic input, not an LED or power load | Keep static and capacitive load within source specifications |
No specifications match. Try a parameter name or a unit.
Do not treat this translator as a high-current buffer.
Enable and signal states
Ideal settled states
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| OE LOW | A and B high impedance | External circuitry may still establish a voltage |
| OE HIGH, A1 LOW | B1 LOW | Both supplies valid; no conflicting driver |
| OE HIGH, A1 HIGH | B1 HIGH at B-domain level | Receiver loading must be suitable |
| OE HIGH, B1 driven | A1 follows at A-domain level | Reverse direction: release the A-side driver first |
| Both ends drive opposite states | Invalid usage | Bus contention; not automatic arbitration |
No specifications match. Try a parameter name or a unit.
High impedance is not a guaranteed zero-voltage state.
3.3 V to 5 V connection
TSSOP PW pin numbers
Scroll within the table to see all columns and rows.
| Parameter | Value | Conditions / notes |
|---|---|---|
| VCCA 2 | 3.3 V | 100 nF to GND |
| VCCB 19 | 5 V | 100 nF to GND |
| GND 11 | Common return | Join both systems |
| OE 10 | A-domain enable plus 100 kΩ to ground | LOW until rails are stable |
| A1 1 | 3.3 V push-pull source | Direction shown A → B |
| B1 20 | 5 V receiver | High impedance input |
| A2–A8 / B2–B8 | Unused A grounded, matching B open | Do not ground both sides of a channel as a load |
No specifications match. Try a parameter name or a unit.
Illustrative wiring and ideal voltage levels, not live simulation.
No matching rowsTry a pin name, parameter, unit or test condition, or reset the filters.