Skip to datasheet
Split-output low-side gate driver

UCC27511 Specifications

Review UCC27511 electrical specifications, operating conditions and package details.

Key specifications

The driver supplies gate charge. External MOSFET ratings, gate voltage, switching losses and layout determine the power-stage capability.

Driver supply4.5–18 V
Peak output4 / 8 A source / sink
Typical delay13 ns · specified conditions
Junction range−40–140 °C

Operating profile

Supply, signals and operating conditions

UCC27511 operating profile
ParameterValueConditions / notes
Selected packageSOT-23-6UCC27511DBVR
Example gate drive12V
Example PWM20kHz
Use these values with the stated grade and test conditions.

Package details

UCC27511DBVR · SOT-23-6

Selected package
Selected UCC27511 physical package
PropertyDetails
ManufacturerTexas Instruments
Part numberUCC27511DBVR
PackageSOT-23-6
Connections6 pins
MountingSMD
Lead pitch0.95 mm
Package codeSOT-23-6
Thermal referenceSee operating and package limits

Electrical operating limits

Use the selected device and grade

Scroll sideways to see all columns.

ParameterValueConditions / notes
Driver supply4.5–18 VRecommended operating range
Input HIGH2.4 V maximum high threshold3.3 V logic example
Input LOW1.0 V minimum low thresholdUse a defined LOW level
Peak output4 A source / 8 A sinkPulsed gate charging at source conditions
Typical propagation delay13 nsSpecified supply, load and temperature
Typical rise / fall9 / 7 nsSource test circuit; not guaranteed for every MOSFET
Junction temperature−40 to +140°CThermal design still required

Do not treat peak current or absolute maxima as continuous operating ratings.

Input and output logic

Gate is driven HIGH only for IN+=1 and IN−=0

Scroll sideways to see all columns.

ParameterValueConditions / notes
IN+ / IN− = 0 / 0Gate LOWOUTL discharges
1 / 0Gate HIGHOUTH charges
0 / 1Gate LOWInhibited
1 / 1Gate LOWInhibited
Floating inputOutput held LOWBias both inputs deliberately
VDD undervoltageOutputs held LOWFollow UVLO thresholds and supply sequencing

Gate voltage is measured relative to the MOSFET source.

Gate-charge example

Illustrative MOSFET Qg=20 nC at the selected drive voltage

Scroll sideways to see all columns.

ParameterValueConditions / notes
VDD / frequency12 V / 20 kHzExample only
Qg20 nCUse the actual MOSFET gate-charge curve
Average gate-charge currentQg × f = 0.4 mAPer active channel
Gate-drive energy per secondQg × VDD × f = 4.8 mWNot total driver or MOSFET loss
Series gate resistance10 Ω on / 4.7 Ω offTune against ringing, EMI and switching loss
Gate pulldown100 kΩGate to source
Local bypass100 nF + 1 µFVery short VDD/GND loop

Peak switching current, average gate charge and load current are distinct.

Connections by function

Select a pin for its function, connection guidance and electrical notes.

Supply1 pin

Gate-drive outputs2 pins

Ground1 pin

Logic inputs2 pins

Read the conditions with every value

Typical values describe stated test conditions. Absolute maximum ratings are stress limits, not operating targets.

Official PDF datasheet

Component view