SHT40Digital humidity and temperature sensor
A tiny four-contact sensor with checked I²C measurements.
SHT40 measures relative humidity and temperature and returns both values over I²C. A single command selects the conversion precision; the controller waits for completion and reads two measurement words, each protected by its own CRC byte. This page covers the SHT40-AD1B bare sensor at seven-bit address 0x44. The 1.5 mm square DFN body needs only supply, ground, clock and data connections. Its opening must remain exposed to the surrounding air. The internal heater can help manage moisture, but heated measurements do not describe normal ambient conditions. Use the SHT4x conversion equations and voltage limits, rather than copying an SHT31 driver unchanged. The humidity formula includes an offset and a different scale. The PCB footprint also omits a center solder land, as recommended for the heater’s thermal behavior.
