+VS
Function
Positive supply input.
How to connect
Connect a regulated 2.7–5.5 V rail and a local 100 nF bypass capacitor.
Electrical note
The basic circuit uses 3.3 V. Keep the supply within the operating range.
Explore TMP36 pins, signal names, electrical functions and connection guidance for each package.
Select a pin to explore its connection
Click a lead or use the arrow keys. Front view · flat face toward you · leads down
Positive supply input.
Connect a regulated 2.7–5.5 V rail and a local 100 nF bypass capacitor.
The basic circuit uses 3.3 V. Keep the supply within the operating range.
Temperature output with a 500 mV offset and a 10 mV/°C slope.
Connect to a high-impedance ADC input; measure against the same ground.
T°C = (VOUT − 0.500 V) / 0.010 V. This is not the zero-offset LM35 equation.
Return for the supply and analog measurement.
Connect to the ADC ground with a short, quiet return.
LOW disables the output stage and leaves VOUT high impedance.
Tie to +VS when unused. Otherwise use a compatible control level.
Only the SOIC and SOT-23 packages expose this function.
Unused physical contact in this package.
Leave unconnected.
Do not use an NC contact as a signal or supply junction.
Unused physical contact in this package.
Leave unconnected.
Do not use an NC contact as a signal or supply junction.
Unused physical contact in this package.
Leave unconnected.
Do not use an NC contact as a signal or supply junction.
Unused physical contact in this package.
Leave unconnected.
Do not use an NC contact as a signal or supply junction.