TMP36 Specifications
Review TMP36 electrical specifications, operating conditions and package details.
Key specifications
The 500 mV offset keeps negative Celsius readings above ground. Measure VOUT with a high-impedance input and subtract that offset in firmware.
Package details
TMP36GT9Z · TO-92
| Property | Details |
|---|---|
| Manufacturer | Analog Devices |
| Part number | TMP36GT9Z |
| Package | TO-92 |
| Connections | 3 pins |
| Mounting | Through-hole |
| Lead pitch | 1.27 mm · straight leads |
| Package code | T-3 |
| Thermal reference | −40°C to +125°C · G-grade |
Operating conditions
Selected TMP36 G-grade parts
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Supply | 2.7–5.5 V | +VS relative to GND |
| Specified temperature | −40°C to +125°C | All three selected package variants |
| Unloaded supply current | 50 µA maximum | Normal operation |
| Shutdown current | 0.01 µA typical; 0.5 µA maximum | SOT-23 / SOIC only; unloaded |
| Self-heating | Less than 0.1°C | Typical still-air behavior stated by the manufacturer |
| Bypass | 100 nF | Place close to +VS and GND |
No specifications match. Try a parameter name or a unit.
Thermal coupling to the PCB or nearby power parts can outweigh the sensor’s intrinsic error.
Voltage-to-temperature relationship
Nominal transfer function
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Transfer equation | VOUT = 0.500 + 0.010 × T | Volts and degrees Celsius |
| Inverse equation | T = (VOUT − 0.500) × 100 | Temperature in °C |
| −40°C | 100 mV | Nominal output |
| 0°C | 500 mV | Offset, not zero volts |
| 25°C | 750 mV | Room-temperature nominal output |
| 100°C | 1.500 V | Nominal output |
| 125°C | 1.750 V | Upper specified-temperature output |
No specifications match. Try a parameter name or a unit.
These ideal voltages illustrate the transfer function; sensor error is not included.
Accuracy and loading
Do not substitute the F-grade limits
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| G-grade error at 25°C | ±1°C typical; ±3°C maximum | TMP36GT9Z, TMP36GRTZ and TMP36GSZ |
| G-grade over rated range | ±2°C typical; ±4°C maximum | −40 to +125°C |
| F-grade alternative | ±2°C at 25°C; ±3°C over range | Maximum limits for different order codes |
| Linearity | ±0.5°C typical | Not the complete accuracy limit |
| Output load range | 0–50 µA | Use a high-impedance measurement input |
| Load regulation at 25°C | 6 m°C/µA typical; 20 m°C/µA maximum | 0–50 µA load |
| Supply rejection at 25°C | 30 m°C/V typical; 100 m°C/V maximum | Specified supply variation |
No specifications match. Try a parameter name or a unit.
ADC quantization, voltage-reference error and sensor error are separate contributions.
3.3 V ADC example
Ideal 12-bit straight-binary conversion
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Reference / resolution | 3.3 V / 4096 levels | 12-bit example; use your actual ADC transfer convention |
| One code width | 0.8057 mV | 3.3 V ÷ 4096 |
| Temperature code width | 0.08057°C | ADC voltage step ÷ 10 mV/°C |
| 25°C ideal voltage | 0.750 V | Before conversion errors |
| Nominal ADC code | 930 | floor(0.750 × 4096 ÷ 3.3) |
| Lower-edge reconstruction | 0.74927 V → 24.93°C | code × 3.3 ÷ 4096; a bin-center estimate differs by half a code |
| Reference calibration | Measure or calibrate VREF | A nominal supply is not an exact reference |
No specifications match. Try a parameter name or a unit.
The displayed calculation is educational; it is not a claim of ±0.08°C sensor accuracy.
Package correspondence
Function identities stay constant; lead numbers change
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| +VS | TO-92 1 · SOT-23 2 · SOIC 8 | Positive supply |
| VOUT | TO-92 2 · SOT-23 1 · SOIC 1 | Analog temperature voltage |
| GND | TO-92 3 · SOT-23 5 · SOIC 4 | Common return |
| SHUTDOWN | Absent · SOT-23 4 · SOIC 5 | LOW disables the output; tie to +VS when unused |
| No connection | SOT-23 3 · SOIC 2,3,6,7 | Leave unconnected |
| Through-hole order | TMP36GT9Z | T-3, three straight leads |
| Surface-mount orders | TMP36GRTZ / TMP36GSZ | RJ-5 / R-8; G-grade limits |
No specifications match. Try a parameter name or a unit.
The TO-92 graphic is a front view with the flat face toward you. SMD pinouts are top views.
Wiring, layout and limits
Keep the analog reading quiet
Scroll sideways to see all columns.
| Parameter | Value | Conditions / notes |
|---|---|---|
| Sensor output | High-impedance ADC input | Account for sample-and-hold settling and input loading |
| Ground | Shared sensor/ADC return | Avoid a motor or high-current return path |
| Shutdown output state | High impedance | An external ADC reading is not valid while shut down |
| Unused shutdown | Tie to +VS | SMD packages only |
| Supply absolute limit | 7 V | Stress boundary, not an operating setpoint |
| Maximum junction temperature | 175°C | Absolute rating; specified measurement range ends at 125°C |
| Storage | −65°C to +160°C | Unpowered storage range |
| Package geometry | TO-92 / SOT-23-5 / SOIC-8 | Original package-specific KiCad exports |
No specifications match. Try a parameter name or a unit.
Keep traces short, add the local bypass and consider heat conducted through the leads.
Connections by function
Select a pin for its function, connection guidance and electrical notes.