Practical projects, fresh perspectives and in-depth tutorials.
Your next engineering idea starts here.
Download the Vertical-Axis Wind Turbine Library for Proteus V1.0: a Savonius rotor with its best point and stall turns a generator for an Arduino.
Read article →Download the 3-Phase PM Generator Library for Proteus V1.0: a 12-pole generator, its rectifier board and a SHAFT pin, measured by an Arduino.
Read article →Download the 6V Mini Solar Panel Library for Proteus V1.0: a 12-cell panel with its I-V curve and hot spot, measured by an Arduino and an INA219.
Read article →Download the 12V Solar Panel Library for Proteus V1.0: a 36-cell panel with its I-V curve, measured by an Arduino and an INA219 at its maximum power point.
Read article →Download the 12V Holding Electromagnet Library for Proteus V1.0: an Arduino and an L9110S hold, drop and release a steel plate and its load.
Read article →Download the 12V Solenoid Water Valve Library for Proteus V1.0: a pilot-operated water valve opened by an Arduino and an L9110S with kick and hold.
Read article →Download the Car Door Lock Actuator Library for Proteus V1.0: a 12V central-locking actuator with its position switch, run by an Arduino and two relays.
Read article →Download the Car Wiper Motor Library for Proteus V1.0: a 12V wiper motor with two speeds and a park switch, run by an Arduino and two relays.
Read article →Download the 8520 Coreless Motor Library for Proteus V1.0: the micro drone motor with its propeller, driven by an Arduino and a TB6612FNG at 20 kHz.
Read article →Download the Wind Turbine Generator Library for Proteus V1.0: a 12 V DC mini wind turbine with a real rotor and generator, read and loaded by an Arduino.
Read article →