Skip to datasheet
Precision bipolar operational amplifier

OP07 Basic Circuit

Build a basic OP07 circuit with labeled pins, component values and connection guidance.

Package view

OP07 in a circuit

A physical eight-pin IC, feedback resistors and local bypass.

OP07CP,IN+ 3at0.2V,90kOUT 6to IN− 2,10kIN− 2to 0V,±15Vrails7 and 4,bypass100nFperrail;trim1 and 8open,NC 5open.
Ground symbols are the 0 V supply midpoint. Pin 4 is−15 V, not ground.

Connect it, step by step

Follow the component values and pin connections

Supply

Apply ±15 V to7 and 4; bypass both rails to 0 V.

Feedback

Use 90 kΩ/10 kΩ for gain ten.

Measure

Read near 2.00 V with a high-impedance meter; include device and resistor errors.

Component view