Skip to datasheet

TPS61200Low-input-voltage synchronous boost converter

Build a higher rail from a low-voltage source with controlled startup and load disconnect.

Manufacturer-referenced

Texas Instruments · TPS61200DRCR

VSON-10 + EPSLVS577E · December 2014

TPS61200 is an adjustable synchronous boost converter for low-voltage sources. It can continue operating down to 0.3 V under appropriate conditions, but its specified minimum startup input is 0.5 V. Those two limits describe different operating situations. This page uses TPS61200DRCR in the ten-contact 3 × 3 mm VSON package with a soldered exposed ground pad. The VAUX capacitor supports startup and the control supply; it is not an optional decoration. The adjustable TPS61200 is distinct from fixed-output TPS61201 and TPS61202. The worked circuit uses a 3 V source, 2.2 µH inductor and a divider for nominal 3.3 V. Power-save mode is enabled, and the unused external undervoltage input is tied to VAUX. Available output current falls as input voltage falls; the switch or inductor current rating must not be presented as the load rating.

3D View

Preparing 3D preview…
3D packageDrag to rotate · Scroll to zoom

Real View

TPS61200 black 3 mm VSON body with ten bright silver flush contacts and underside ground pad.
TPS61200DRCR · VSON-10 + EPPackage illustration

Pinout

TPS61200VSON-10 + EPTop view · ten edge contacts and exposed pad 11
Select a pin to see its functionVSON-10 + EP · 11 pins

PCB Footprint

Loading footprint…
Powered by
Finding VSON-10 + EP packageTop view · mm

Component view